How to find the receiver tracing factor in COPA assessment

HI,
how to find out the receiver tracing factor in COPA assessment.Kindly help me the logic to anylise.
Thanks
Supriya

Hi,
If Receier Tracing Factor Rule is Variable Portion, then please also check the Receiver Weighting factor (the last tab in the assessment cycle, it normally is 100 for the receivers.
Secondly also check if there is different currency setting in CO Area & the Operating Concern which translates into different figures.
Hope this works.
Regards
Saket

Similar Messages

How to analyse the Receiver Tracing Factor in COPA Assessment cycle -KEU5

Hi
While executing the COPA Assessment cycle,we will get receiver tracing factor.My client wants to know how we got that.How can i analyse that Receiver tracing factor?Kindly advice me...
How can I recalculate the tracing factor for assesstment?
For example, Actual Assessment Cycle RS_A01 under Segment ITCMFG2AD uses Variable Portions Rule for Receiver tracing Factor with Value Field of 62 Sales.
The intent of this assessment was to be allocated based upon sales dollar values however when I review the test calculation, it appears the tracing factor is in billions of dollars when our monthly sales are in the million of dollars range.
Supriya

Hi,
If Receier Tracing Factor Rule is Variable Portion, then please also check the Receiver Weighting factor (the last tab in the assessment cycle, it normally is 100 for the receivers.
Secondly also check if there is different currency setting in CO Area & the Operating Concern which translates into different figures.
Hope this works.
Regards
Saket

Reciever tracing factor in COPA assessment cycle

Hi All,
I have account-based COPA and am trying to create COPA cost center assessment cycle in Tcode KEU2. While filling the reciever tracing factors, i can see the following values
RCMEGI     Total Quantity
RCWKFI     Fixed Costs
RCWKGI     Total Costs
However i need to define another key figure based on headcount
Can anyone help me with how to create additional Amount/Qty Field for the assessment cycle. Where would be above be defined?
Thanks & Regards
Pooja Saxena

Hi Christian
Are you suggesting that the costs from cost center be allocated upon, say, some IOs based on SKF and then settling the IOs to COPA?
This would be very cumbersome to create as many IOs as the possible combinations of Customer/ product / Other receiver chars
Or are you suggesting some thing else which I could not catch?
Also, new qty field can be created in KEA6... Values updated for this thru KE21N will work for acct based COPA?
Regards
Ajay M

How to find the origin costs(primary CE) for Assessment cost elements

Hi All,
How can we trace the Orgin costs(cost senders) for Assessment cost element.
I have to create Co report where user wants the Costs senders(primary cost elements) details for Assessment cost element.
Our cycles are defined as senders - cost center and receiver's are Internal orders.
so for assessement cost elements what are the primary cost senders.
Is it possible to trace the primary cost elements details for Assessment cost elements.
Regards,
Raj

Hi Chirstian,
Thanks for the information.
I have done the same as per your advise.
I am trying to pull all the primary cost elements which are posted with my sender cost center's.
All the cycles are defined as share in % = 100%.
But unfortunately all the debits are of primary cost elements is not equal to credit amount of my Assessment cost element.
The figures are very far and couldn't trace the difference amount. Is there any other report in SAP or how i can define in report painter to meet this requirement.
Thanks & Regards,
Raj.

How to find the File name using the FTP Adapter

hi all,
how to find the File name using the FTP Adapter with BPEL.
Regards

Found the solution for this.
First In the mediator's routing rule use assign property $in.property.jca.file.FileName to $out.property.jca.file.FileName
In the BPEL's receive activity go to the properties tab and get the property to a BPEL variable. That should do it.
Thanks for the posts

How to find the workflow admins for all costcenters ?

Dear SRM gurus
We are using Classic scenario with N th step workflow with BADI.
we have a requirement.
How to find the workflow admins for the particular costcenters.
we used HRV1222A where ATTRIB EQ <Z attribute>(This is our own attribute to group all the costcenters)
used table HRP1001 to find the Admins but results are not correct because it is not showing my user id(I have all authorisations).
Is there anyway to find all the admins for a cost center(users are more than 7000+)
can anybody send work flow related presentations or cookbook
Thanks in Advance.
srinu

hi
I have not received any thing.Please send again
[email protected]
[email protected]

How to find the IDOC for the archived message in integration engine

Hello experts
In my outbound scenario (Idoc to file), I have a message id got processed from integration engine (SXMB_MONI) but failed in adapter engine (RWB) on 1week back, The same message archive in SXMB_MONI but i found same message in adapter engine.
My question is how to find the archive message IDOC num
We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
Kindly provide the solution for the issue, Is there any alternative to find the idoc?
I can search with partner in sap side but i can get lot of idoc's
Thanks & Regards
Rajashekar

> We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
>
> I can search with partner in sap side but i can get lot of idoc's
Hi,
If solution given by experts in above replies doesn't work then you can try below method.
What you can do is, take some unique values from message content tab (which came in some specific segment from IDOC)
Now in R3 use tcode WE09 and set the dates when this was processed. Set other filter criteria as much as possible e.g. direction, idoc basic type, port, partner etc and at the bottom you can "Fast search mode" their you give the segment name and it's value.
This will help you get you IDOC.
Regards,
Sarvesh

Reg - how to find the purpose of methods in a class

hi everyone,
           can u plz help me with how to find the purpose of methods in a class???????
a description abt the methods in a class??????
                    thx in advance,
regards,
balaji.s

Hi Balaji
Pls find some stuff.
reward pts if help.
The following statements define the structure of a class:
·        A class contains components
·        Each component is assigned to a visibility section
·        Classes implement methods
The following sections describe the structure of classes in more detail.
Class Components
The components of a class make up its contents. All components are declared in the declaration part of the class. The components define the attributes of the objects in a class. When you define the class, each component is assigned to one of the three visibility sections, which define the external interface of the class. All of the components of a class are visible within the class. All components are in the same namespace. This means that all components of the class must have names that are unique within the class.
There are two kinds of components in a class - those that exist separately for each object in the class, and those that exist only once for the whole class, regardless of the number of instances. Instance-specific components are known as instance components. Components that are not instance-specific are called static components.
In ABAP Objects, classes can define the following components. Since all components that you can declare in classes can also be declared in interfaces, the following descriptions apply equally to interfaces.
Attributes
Attributes are internal data fields within a class that can have any ABAP data type. The state of an object is determined by the contents of its attributes. One kind of attribute is the reference variable. Reference variables allow you to create and address objects. Reference variables can be defined in classes, allowing you to access objects from within a class.
Instance Attributes
The contents of instance attributes define the instance-specific state of an object. You declare them using the DATAstatement.
Static Attributes
The contents of static attributes define the state of the class that is valid for all instances of the class. Static attributes exist once for each class. You declare them using the CLASS-DATA statement. They are accessible for the entire runtime of the class.
All of the objects in a class can access its static attributes. If you change a static attribute in an object, the change is visible in all other objects in the class.
The technical properties of instance attributes belong to the static properties of a class. It is therefore possible to refer in a LIKE addition to the visible attributes of a class through the class component selector or through reference variables, without prior creation of an object.
Methods
Methods are internal procedures in a class that define the behavior of an object. They can access all of the attributes of a class. This allows them to change the data content of an object. They also have a parameter interface, with which users can supply them with values when calling them, and receive values back from them The private attributes of a class can only be changed by methods in the same class.
The definition and parameter interface of a method is similar to that of function modules. You define a method meth in the definition part of a class and implement it in the implementation part using the following processing block:
METHOD meth.
ENDMETHOD.
You can declare local data types and objects in methods in the same way as in other ABAP procedures (subroutines and function modules). You call methods using the CALL METHOD statement.
Instance Methods
You declare instance methods using the METHODSstatement. They can access all of the attributes of a class, and can trigger all of the events of the class.
Static Methods
You declare static methods using the CLASS-METHODSstatement. They can only access static attributes and trigger static events.
Special Methods
As well as normal methods, which you call using CALL METHOD, there are two special methods called constructor and class_constructor that are automatically called when you create an object or when you first access the components of a class.
reward pts if help.
deepanker

How to find the third highest salary by distinct the salary from deptno20,from employee table

how to find the third highest salary by distinct the salary from deptno20,by using employee table

You already asked this question, a half hour earlier:
https://forums.oracle.com/thread/2569985
and received a reply.
Do not multi-post to the forums.
These are user-to-user forums and everyone is posting because they volunteer to post and not because they get paid to post. Everyone else is paid exactly the same as you are paid to post here. When you multi-post is makes you appear as impatient and expecting instantaneous answers.
That is poor forum etiquette, approaching behavior similar to spamming the forums.
This duplicate post is locked.

How to find the XML file size in the scenarios?

Hi All,
Recently i have attended an interview at a MNC.
They asked some realtime questions like
1.how to find the XML document size in a File-File scenario?
2.What is mass-assignment replication etc.....
Can anybody tell me the solution for these.
Best regards
Hari prasad

If the input is a flat file, there is no exact way to calculate the size of the generated XML file, since it depends on many factors (number of fields in the recordsets, size of the name of the fields, number of records, etc).
As a rule of thumb, generally ppl use XML file size = 2 x Flat file size, in order to do sizing calculations etc. But again, that is just an estimation, not a precise calculation.
Regards,
Henrique.

How to find the WebUrl alert was raised for external network

I have two weburl's requestes to monitor under SCOM2007 R2
url one: https://www.asdftest.com
url two: https://www.lkjhtest.com
"url one" is configured to access the weburl from internal network and external network(internet) as well.
"url two" is not configured to access from external network(internet). only configured for for internal network.
I have configured for scom monitoring for the above two urls using the SCOM 2007 R2 web application template. After configuration i have not received any alert from the "Url Two"
Q1). I am expecting an alert for "Url two" because it is not configured for external network access.
why i was not received any alert for that.
Q2). How to find an web Url alert is raised for internal network or external network. SCOM Tool is not asked me to specify that the weburl is is from internal/external network access.
Q3). Particularly how to find the Url alert was raised for external network
please suggest me and correct me if i am wrong.
Thanks in advance.

Hi,
Please refer to your another thread:
http://social.technet.microsoft.com/Forums/en-US/10d32ff3-d1a5-4875-b1ad-bb01a5799a33/web-url-monitoring-internalexternal-network?forum=operationsmana
Regards,
Yan Li
Regards, Yan Li

How to find the place of manufacture?

How to find the place of manufacture?

For your own information, you could try & check with one of the online identify-by-serial-number
services; no telling what they may use any information (of yours) they may get from an inquiry...
I'd used this one a few times and with a Serial number, it does show a place of manufacture;
but with only a Model number, it does not say much about when or where it was made... in
fact the model number goes to an older model, too; what I see w/ Model number is not Retina.
•Identify your Mac - Lookup your unit by Apple Serial number, or Model Number:
https://www.powerbookmedic.com/identify-mac-serial.php
According to http://MacTracker.ca database, a MacBook Pro, Retina, 15-inch, Mid-2014, has a
has a Model number of A1398 and EMC 2876 and had one of three different processors.
Not sure if this helps, but assembled in China is usual information on many of those. Some
versions with added parts or 'custom built orders' may have a different point of final assembly.
And if you receive the computer via a parcel delivery company, sometimes their web site or
tracking information on your specific order will show the path it took to get from you. If the
item was stocked in a region nearer you than the point of manufacture, or a main warehouse
the item could have been shipped from another location where they had additional inventory.
Hopefully you can find the details you need.
Good luck & happy computing!

Difference between Receiver Tracing factors and weighting factor

Hi
I   have read sap help, but   the difference between receiver tracing factor and receiver weighting factor is still not clear.
Can u provide an example to understand it.
Thanks
kamala

Hi Kamala
As far as I know, the weigh fac is meant to determine the decimal places...and Sender values tab is meant for determining the % to be allocated...
In the tab "Weigh factor", you would see a field FACTOR PER, which has the following entries
0000001 No decimal places
0000010 One decimal place
0000100 Two decimal places
0001000 Three decimal places
0010000 Four decimal places
0100000 Five decimal places
1000000 Six decimal places
By default it is 0000100 which means 2 decimals..F1 help on this field shows that
You enter 123456 as the weighting factor. Depending on the factor, this number is interpreted as:
Factor      Decimal places   Weighting factor
1                 0              123456
10                 1              12345.6
100               2              1234.56
Hope this helps
Regards
Ajay M

How to find the server hosting office communication ?

Hello
How to find the server hosting office communication ?
Thanks,
Dom
System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

Hello,
I have:
DG URL Internal;https://OCS.ad.xxxxxx.xxxx.xxx/GroupExpansion/Int/service.asmx;--;
DG URL External;;--;
Quality Metrics URI;;--;
URL Internal From Server;https://OCS.ad.xxxxxx.xxxx.xxx/Abs/Int/Handler;--;
URL External From Server;;--;
Voice mail URI;sip:[email protected];opaque=app:voicemail;--;
MRAS Server;;Not Configured;
GAL Status;https://OCS.ad.xxxxxx.xxxx.xxx/Abs/Int/Handler;--;
Controlled Phones;TRUE;--;
PC to PC AV Encryption;AV Encryption Enforced;--;
Focus Factory;sip:[email protected];gruu;opaque=app:conf:focusfactory;--;
Telephony Mode;Telephony Mode Disabled;--;
Line;;--;
Line Configured From;Auto Line Configuration;--;
Location Profile;;--;
Local Log Folder;C:\Users\me\tracing;;
MAPI Information;MAPI Status OK;MAPI Status OK;
Inside User Status;TRUE;;
Auto Update Download Started;--;--;
Auto Update Download Completed;--;--;
Last Auto Update Request;--;--;
Pairing State;Communicator cannot connect to your desk phone because the USB cable is not plugged in. Make sure that you connect the cable.;Enabled;
I see my email on the sip line but no server... what do I miss?
Is it by the URL?
Thanks,
Dom

Receiver tracing factor rule

Hi all,
In KSU3, I see there are few selection of receiver rule.
May I know what are the purpose for the below?
variable portions
fixed amount
fixed percentage
fixed portion
Thanks alot
help.sap.com

Hi,
check if these divisions have any postings under cost element 627800. It's because you've selected variable portions with receiver tracing factor cost element 627800.
Why don't you use fixed percentages or fixed portions instead of variable portions?
Regards,
Jasmina.

How to find the receiver tracing factor in COPA assessment

Similar Messages

Maybe you are looking for