How to find the reporting for work center machine wise

hi gurus
My question is . In one work center machine capacity category 2 machines are used. Client is asking the report machine wise. i.e as 2 machines are available .What is the capacity utilisation for each machine.Provide me the information for this. Thanks in advance
kalyan

Hi Kalyan
you have to make some settings in production order & work center first.
In work center capacity header ,you have to make indiovidual capacities as 2.
In the same capacity header screen by going through the menu Goto--->individual capacitities define these different individual machines.
In the production order operation detail screen goto " capacity reqmt assignment " assign the quantities for different work centers.
Adfter this in the confirmation CO11N you have to fill the split field accordingly& confirm different wortk centers seoperatley.
Then you can the report in the CO14 for diferent work centers.
you try this.
Regards
YMREDDY

Similar Messages

How to find the report for the SAP query (Query exists in table AQLQCAT)

Hello Experts,
I need to find the tables used in the SAP Query but i don't have access to transaction SQ01,SQ02 and SQ03 to check the same.
Therefore i checked table AQLQCAT and got the SAP Queries in the system. Then searched for the reports that would have been generated for the same passing AQusergroupquery name* in transaction SE38.
But unfortunately the program does not exists for the given paramenter.
Could you please let me know how to get the report name for the SAP Query.
Secondly please suggest any other way of checking the tables used in the SAP Query.
Also the table name from where i can download the SAP Queries.
Thanks in advance.
Regards,
Rahul Sinha

I suggest you a simple method.
Execute the query. When the selection screen is showed, go to menu and click to SYSTEM->STATUS.
Check the program name and double click it to access the program code.
Search for tables or functions into the source code in order to understand where data are taken.
If you do not find anything , go to the program atttribute and check for logic database, sometimes they are used....
Best regards.

How to find the patches for perticular concurrent program

HI
How to find the patches for perticular concurrent program. suppose for one concurrent program we create the patch and applied now i want know the which patch applied for perticular concurrent program through back end.
Thank's

Query the concurrent program in Sysadmin responsibility.
Note the concurrent executable.
Query the concurrent executable in Sysadmin.
Note the file name.
If it is a package, open the package in TOAD and note down the file name.
If it is a report/form, open it in form developer and note down the file name.
Go to patch find screen in metalink. In the advanced search screen, enter the file name and you will see patches that contain it.
Hope this answers your question
Sandeep Gandhi
Independent Consultant
513-325-9026

How to find the what version ( Data center or Standard ) of SCOM installed

How to find the what version ( Data center or Standard ) of SCOM installed
Raghavendra Bhat

Raghavendra, you are true. There are two version of System center
Microsoft considers the Standard version for those who are “lightly” virtualized, i.e., those that do not need an excessive number of VMs running in the organization. The license for Standard includes 2 processors and 2 VMs (or two
OS instances). You can stack licenses if you need to add additional processors or additional VMs in your environment, but there is a breakpoint where it makes more sense, financially, to opt for the Datacenter package. That breakpoint will generally
be around 5 VMs. Pricing is $1,323 for System Center 2012 Standard.
Microsoft considers the Datacenter version for those organizations who are highly virtualized. System Center 2012 Datacenter licenses include an unlimited number of Operating System Environments (OSEs) in an on premises environment
or eight OSEs in a public cloud environment. Large Enterprises and Cloud providers will benefit most from this model. Pricing is $3,615 for System Center 2012 Datacenter.
For more information about licensing and difference between system center Datacenter and standard, you can refer below link
http://myitforum.com/myitforumwp/2012/01/17/new-system-center-2012-suite-versioning-and-licensing-model-simplifies-and-excites/
Please remember, if you see a post that helped you please click (Vote As Helpful) and if it answered your question, please click (Mark As Answer).

How to find the reports/Txs that are affected by changes made in NA30

Hi All,
Does anyone know how to find the reports and transactions that are affected by ISH Billing (Interim Billing /Final billing) in hte Tx NA30. I need to modify the some functiionality of Interim billing at NA30 and still maintain the consitenecy of NA30.
Many thanks & Regards,
Vijaya

No idea about any such report but from SAP help got following list of billing reports. It might be helpful
RNAABGR0 IS-H: Revenue Accrual
RNAABRKZ IS-H: Change Billing Indicator of a Case
RNABD000 IS-H: Patient Billing
RNABILB0   IS-H: Change Billing Block via Conditions
RNABILB1   IS-H: Change Billing Block via Conditions (Outpatient Cases)
RNADIN03   IS-H: Billing Document Mass Print Program
RNAFSPER IS-H: Change Billing Block
RNANFAL0 IS-H: Set Cases Without Billable Services to "Final Billed"
RNANFAL1 IS-H: Set Outpatient Cases Without Services to "Final Billed"
RNANFAL2 IS-H: Set Fully Billed Cases to "Final Billed"
RNASED00 IS-H: Delete Case Selections
RNASEK00 IS-H: Copy Case Selection
RNASELM0 IS-H: Billing - Process Messages
RNASEL00 IS-H: Case Selection
RNASEL01 IS-H: Case Selection via Outpatient Visits
RNASTO01 IS-H: Cancel Billing Documents for Case [Live Mode]
RNASTO02 IS-H: Cancel Billing Documents for Case: Mass Partial Cancellation [Live Mode]
RNASTO03 IS-H: Cancel Invoice Items per Case (Partial Cancellation) [Live Mode]
RNASTO04 IS-H: Cancel Provisional Invoice
RNAPRV04 IS-H: Cost Reimbursement u2013 Direct Patient Billing
RNAENT00 IS-H: Billing Status of Inpatient Cases
RNA_CASCADE_BILLING IS-H: Cascade Bill Processing

HOw to find the text for PERSK field in infotype 0001

hi all
HOw to find the text for PERSK field in infotype 0001

Hi
T503T : contained the similar informative text for PERSK . read this for T503T-PTEXT.
..lakhan

Hello. I'd like to get learning and become certified. What should I do and how to find the link for staring education?

Hello. I'd like to get learning and become certified. What should I do and how to find the link for staring education?

Hello there, g0ddess.
The following link proves to be a great resource to get started with Apple Training and Certification:
Training and Certification
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to find the Ranges for a field ?

Hello All,
 Can anyone tell me how to find the ranges for a field.
1, i.e say I want the Ranges Structure for the field LIFNR.
 The ranges structure for this is "RANGE_LIFNR".
 This I used in my Program since I know it previously.
 But now I want the ranges structure for the field VBELN (Delivery Document).
 I don't know what is it !!!!!
2, Is there any procedure to know the ranges structure for a particular field ?
Regards,
Deepu.K

Hi Deepu,
Using 'Where used list' you can able to find out RANGES tables.
For VEBLN range table is --> CRM_AC_ASSIGN_VBELN
If you using a program defined as shown below.
DATA: r_vbeln type ranges of vbeln.
The above statement also creates ranges structure in Runtime.
Procedure finding range table structures
go to SE37 -> Enter domain or dataelement value
Go to where used list --> search for 'Structures'
After getting all structure --> Click 'SEARCH' butoon in tool bar --> Search for 'RANGES' word
You can get all ranges tables in the search window
If helps plz reward points.
Regards
Bhupal Reddy

How to find the SteroMixer for my HP TouchSmart PC

I just need to know how to find the SteroMixer for my HP TouchSmart. I did read previous concern and also followed the steps but under my hardware it shows this HDAUDIO\FUNC_01&VEN_11D4&DEV_194A&SUBSYS_103C2A8E&REV_1004 and this HDAUDIO\FUNC_01&VEN_11D4&DEV_194A&SUBSYS_103C2A8E.
I just need to know which do I use so that I will be able to add music to the CamStudio...

Maybe this helps.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01461692&cc=us&dlc=en&lc=en
or try them here.
http://h30434.www3.hp.com/?lc=en&cc=us
http://answers.microsoft.com/en-us/windows
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to find the workflow for Change Request for the PO's

Hi All,
We have a PO which is pending and we can't receipt it again nor make payment on this. After checking the Approval history for that PO we found that the change request has been made. The change request was to change the amount to be paid to R39196 instead of R58237.00. We don't know where to check the workflow for the change request to identify the cause.
what i need to know is how to find the workflow for that change request? The other workflows can be checked using the po_header_id for the PO's but i am confused with the change request workflow
Your input will be highly appreciated.
Thanks in advance
Rgds,
Sonia

For 11.5.10.2 run this query to determine the keys to search on:
Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'PO' and Document_num = 'put-PO-number-here'
Then use the keys returned by the query to look up the Workflow in
Workflow Administrator Web Applications / Administrator Workflow / Status Monitor
Search using the results returned in fields "Type Internal Name" and "Item Key" in Status Monitor
The query for change requests on a specific Requisition would be:
Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'REQ' and Document_num = 'put-Req-number-here'

How to Find the Runtime for any workitem.

Hi,
Could you please tell how to find the runtime for any workitem.
Thanks,
Bhanu Gattu.

Hi,
I think, your query is pertaining to Workflow.
Please explain your requirement little more.
If you need Runtime Analysis: Then the transaction Code: SE30 must be used.
Thanks.
RamaniN
Edited by: Ramani Nagarajan on May 21, 2009 12:33 PM

How to find the Extracstructure for 0PLANT_ATTR for RSAP0001 for EXIT_SAPL

Hi ,
how to find the Extracstructure for 0PLANT_ATTR for RSAP0001 for EXIT_SAPLRSAP_002 ?
I need to extend the Datasource 0PLANT_ATTR with RSAP0001 in EXIT_SAPLRSAP_002.
In Table ROOSOURCE I do not have an entry for 0PLANT_ATTR.
How can I identify the extractstructure for 0PLANT_ATTR ?
Thanks !!!
Martin

Hi Martin
Go to RSA6 and do a find for Plant attr and from there you will find the extract structure: BIW_T001WS.
You can add the fields here and then using CMOD/Exits you can write the code to populate the data.
Thanks
Kalyan

Sql query to find the balances for a customer account wise.

Hi,
Could someone help me with the sql query to find the balances for each customer account wise. This is need to generate the report.
presently we are using this query, but the output doesnot return the expected result.
SELECT sum(nvl(ps.acctd_amount_due_remaining,0)) "Balance"
FROM ra_cust_trx_line_gl_dist_all gld,
 gl_code_combinations c,
 ar_payment_schedules_all ps,
 RA_CUSTOMER_TRX_ALL rat,
 ra_customers rc
WHERE c.CHART_OF_ACCOUNTS_ID = 101
and gld.code_combination_id = c.code_combination_id
 and rat.CUSTOMER_TRX_ID=gld.CUSTOMER_TRX_ID
 and rat.CUSTOMER_TRX_ID=ps.CUSTOMER_TRX_ID
and ps.customer_id=rc.customer_id
 and ps.status='OP'
 and ps.gl_date <= :PDATE
 and ps.org_id=:PORGID
 and ps.class in ('GUAR','INV','DM','DEP')
and c.SEGMENT4=:Account_id
and ps.customer_id=:Customer_id
Thanks in advance.
Kalyan.

Can someone help us with this.

How to find the IDOC for the archived message in integration engine

Hello experts
In my outbound scenario (Idoc to file), I have a message id got processed from integration engine (SXMB_MONI) but failed in adapter engine (RWB) on 1week back, The same message archive in SXMB_MONI but i found same message in adapter engine.
My question is how to find the archive message IDOC num
We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
Kindly provide the solution for the issue, Is there any alternative to find the idoc?
I can search with partner in sap side but i can get lot of idoc's
Thanks & Regards
Rajashekar

> We can't find in adapter engine it will show only (sender service, receiver service and interface date and time as well and receiver structure in message content tab) but not idoc no,
>
> I can search with partner in sap side but i can get lot of idoc's
Hi,
If solution given by experts in above replies doesn't work then you can try below method.
What you can do is, take some unique values from message content tab (which came in some specific segment from IDOC)
Now in R3 use tcode WE09 and set the dates when this was processed. Set other filter criteria as much as possible e.g. direction, idoc basic type, port, partner etc and at the bottom you can "Fast search mode" their you give the segment name and it's value.
This will help you get you IDOC.
Regards,
Sarvesh

How to find the definintion for a particular implementation

hi
ihave the implementation name so i put this in se19
and after enter it asks for definition which has to be created in se18
if we have some predefined definitons already for that implementation
how to find the particular definiton that is to be used

Put that implementation name in the enhancement name option of SE18 and press display. I hope by implementation you dont mean the Z Include.
If it is Z include then look for where use list of that and pick the Enhancement name from there.
Regards,
Amit

How to find the reporting for work center machine wise

Similar Messages

Maybe you are looking for