How to find the 'ReturnQty' in Goods RECEIPT PO

Dear all,
    Anybody help me to find the ReturnQty in Goods Receipt Po (PDN1).. say for example i have 100 Qtys in GRPO.Table name pdn1.i have returned 20 Qtys. how can i find the return qty in GRPO..
AnyBody please tell the Field name in Pdn1 for that ReturnQty to be Found
Thanks in Advance..
Regards,
G.shankar Ganesh

what you are searching for isn't in PDN1.
i explain it
in OPDN and PDN1 (Good Receipt PO) you get Items.
when you return them you use Goods Return (Tables OPRD and RPD1).
that means you have two different documents and you should "connect" them by using
an UDF or for example Supplier Ref. No.
regards
David

Similar Messages

  • How to find the container in goods receipt table

    hi,
    how to find the number of containers with respect to each material document. After posting the material document the number of containers cannot stored in MSEG or MKPF table. i can able to find only in QALS table  but how to link the material document and inspection lot.
    Thanks
    Muthuraman.D

    Hi Muthuraman,
    Can you check this bapi BAPI_INSPLOT_GETLIST.In this bapi there is a different selection criteria like material,material document no and all. I think you can use this for your report. Check this and post if need help.
    Regards,
    Madhu.

  • SAP how to determine the account in Goods receipt for purchase order?

    We know when we make a Goods receipt for purchase order,we will use the account in GBB and BSX define in OBYC. But where can we find the rule? I mean why system can find the account in GBB and BSX , not the other TEcode?

    HI
    This is again based on the movement type which SAP has created a link internally.
    So if you see when a document is posted it basically derives the GL accounts based on the Movement type,Valuation class,valaution area and so on.
    Good luck
    Hari

  • How to find the Semifinished Goods in list of Finished Goods

    Hi
    I have list of Finished Goods. Tell me how to find the Semi finished Goods used in this finished Goods using Table Level.
    Kindly help.
    Regards,
    Rajkumar.C

    Hi,
    Have you created a Material  BOM for finished product ?
    if so all your subcomponents can be semi-finished or finished
    you can check in CS02 or MAST table
    regards,
    santosh

  • To find movement type for goods receipt

    Hi,
    Can someone tell me how to find the movement type for all the special stocks  for goods receipt except 101.  I am searching manually from MB5B tcode  for all the special stock  for specific client but its too hectic process to find manually all the goods receipt in this way .
    Any table / way to find the movement type used for goods receipt  please suggest.

    Hi,
    I don't think MB5B the best report to analize goods movement...
    1. Try MB51 and set "not empty" for special stock indicator. Which movement means GR and which does not...good question...
    You should know what you are looking for...(see point two)
    2. Using SE16 + MSEG you can analize your goods movement: MSEG-BWART (movement type) and MSEG-SOBKZ can be used to select relevant goods movement.
    In MKPF you will find two indicators: MKPF-BLART and MKPF-BLAUM (GR against PO is identified by MKPF-BLAUM""WE") - you can use these somehow...but in my opinion the best is if you collect all the movement types that means GR at your comapny and put them in MSEG-BWART as selection criteria...
    (if you want to use MKPF and MSEG you have to build a query in SQVI or in SQ01/SQ02).
    Regards,
    Csaba
    Edited by: Csaba Szommer on Jul 12, 2009 5:27 PM

  • Report to check the stock transfer goods receipts

    Hi,
    We do stock stansfer from plant to plant using UB PO type and using 351 and then do the MIGO for Goods receipt.
    User would like to check the list of Goods receipt done from a specific plant XYZ, HOW to check this? as there is no option available in MB51 for the supplying plant.

    There's no standard report which fully covers your requirement. If MB51 is no acceptable for you, you have to create your own report. E.g.
    - SQ01/SQ02 --> using data tables MKPF & MSEG
    - you can also copy MB51 (MB51 --.> ZMB51; program: RM07DOCS) and modify it according to your requirement (add desired field(s) to selection screen and layout.
    /issuing plant is stored in MSEG-UMWRK/

  • How to find the list of Tables....

    Hi
    How to find the list of Tables associated with When a Goods Issue is done for a Process Order ??
    Kindly tell me step-by-step procedure in browsing it.
    cheers
    MaruthiRam

    Hi
    goto SE16 Click F4, You have two options Information system & Sap Applications.
    Click on SAP Applications & selec the application you wnat to see, for E.g Purchasing you can click on materials managemnt, Purchasing if you drill down you will see the list of tables....
    reward points if useful
    Thanks & Regards
    Kiran

  • Auto Creation of Storage Location at the time of Goods receipt

    Dear All
    Please tell me how can i create storage location automatically at the time of Goods receipt.
    i already made the configuration in OMJ8 for movement type and required plant
    still, at the time of creating PO its not getting created..
    Please advice
    Narendra C.

    Hello Narendra,
    If you are trying for automatic creation of strorage location for goods movement to special stock, then ithe data will nit be created. This standard SAP functionality.
    Also if you have maintained storage location in the preceeding documents, then it will automatically fetched during goods reciept.
    BR,
    Tushar
    Edited by: Tushar Patankar on Feb 4, 2011 12:50 PM

  • Can we create 2 inspection lots at the time of goods receipt.

    Hi experts,
         Can we create two inspection lots at the time of goods receipt from vendor.I will assign two inspection types in material master
    suppose 01,02.Both are releated to goods receipt.For one inspection lot when we take usage decision stock should not post into usage decision.for other inspection lot stock has to be posted.Is this possible?if possible how to do configuration?

    I think I made this recommendation in a previous post concerning this but this is exactly what reference operation sets are created for.
    Create the reference operation set for the characteristics that are used for all the materials.  You create this once.
    When you create the sepcific plan for the individual materials, you include the reference operation as one of the operations, (probably the first one in your case).  You don't have to add characteristics, modify or change it.  All the characeristics and settings come from the reference operation.  If you need to make a change you edit the reference operation and make the change once.   The change is immediately seen in all newly created inspection lots.
    In a second operation of the plan, you add the characteristics specific to the material.
    You can add different workcenters to the operations if you want.  That way you can set up security on the workcenters and control who can record results against which operations.
    Aside from creating lots manually, you can't create two lots at the same time from the same GR.
    Craig

  • Printing a putaway label at the time of Goods Receipt

    When the Goods Receipt(GR) is done for the stock in interim receiving area (Storage Type 902) then the put-away labels are printed from Transfer Order for GR.
    Users will take the labels and move the materials from staging area to destination bins according to information printed on the label. There should be feature to re-print the labels (from spool – standard SAP function) as and when needed.
    Currently at the IDC location, the following process is utilized; The WMS system produces a putaway label at the time of Goods Receipt. The label print screen in WMS asks for the load ID of the received load and the operator selects label type l and the barcode printer it should print at. The label is automatically printed and sent to a pre-assigned printer. The label is then used to identify the location which the material is to be relocated to from the receiving area, either a picking bin location, or a surplus bin location for storage and replenishment purposes. The label has Job Type, Receipt Date, Quantity, Material Number & Description, Operator I.D., Number of pallets/boxes, Unit of Issue, Serial Number, Destination bin and Load I.D.
    can any one guide me on this!! ASAP

    do you mean when a GR is printed, it shud automatically print the label  as opposed to the manual process now?
    In that case you may have to find a user exit that is triggerred upn saving the GR and call ur label program from there.

  • How to find the data loaded from r/3 to bw

    hi
    how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild  and table the data is comming from . plz help
    thanks in advance to u all

    Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
    So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
    As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
    Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
    Good job
    GFV

  • How to find the text of a viwe

    How to find the text of a view?
    I tried all_views but it only types the partial text. What can be the problem and the possible solutions?
    Naveen

    We also found there was a "COL TEXT A80" in our glogin.sql. I don't know whether we put it there or whether it was installed by default. This resulted in some views which had been defined with longer lines having words chopped in half, which is no good for creating scripts. Therefore when selecting view text I also issue a
    COL TEXT A200 word_wrapped

  • How to find the length of the resultset

    how to find the length of the resultset

    (Doing a select count as somebody suggested is nota
    good solution, as the count can change betweenyour
    count query and your real query.)And the number of rows can't change between getting
    the last one and doing the actual work?I don't think so. Once you've got the ResultSet, I don't think it will change under you, unless you explicitly set it to SCROLL_SENSITIVE.
    I could be mistaken though.

  • How to find the Latency time in java.

    How to find the Latency time in java.

    long start = System.currentTimeMillis();
    doTheWork();
    long durationInMillis = System.currentTimeMillis() - start;You might repeat doTheWork() several (100-1000 or more) times if it is fast and the granularity of your system clock is not good enough.

  • How to find the date my iPhone 4s was manufactured

    Hi, Please can anyone tell me how to find the date my iPhone 4s 64gb was manufactured. I have the serial and i-m-e numbers. For some reason my Insurance company want to know, all I wanted to do was add the phone to my all risks policy. Thanks in advance for any advice.

    That's all you will get, there is no way to know the manufactured date only the warranty status from date of original sale and it is most unlikely your warranty is still "good" on an iPhone 4

Maybe you are looking for