How to find the right OSS Note for my SAP version

Hi All,
There have been issues with the Vendor/Material Master records whenever we run a LSMW by recording process. It is such that all those fields that we have not updated come up with a value as *DELETED* for which i think we should implement a OSS Note to our system.
I am unable to find the right OSS Note Number for this to our SAP system :
SAP_APPL Support Pack: SAPKH50009 Components:Logistics & Accounting.
Request you all to provide me with the correct OSS Note Number so that we can get this issue corrected as this has become very critical.

Hi,
As Jurgen wrote - it could be some programming problem.
But, generally, if you find a SAP Note, that, in your opinion, can solve your SAP problem and it is not intended for your SAP version - simply write to SAP OSS.
If this note really solves your problem, they will extend the validity of this note for your SAP version.
Otherwise, if it is SAP problem, OSS will try to provide solution for it.
I usually act like this - it works.
Hope it helps, not this time, maybe in the future.
Regards,
Wojciech

Similar Messages

How to find the right primary key for DSO from Business Content

According to best practice design, it is reccomended to make a DSO where all fields from Business COntent Datasources are transferred.
But, how to find the right primary indeks ?
Any good suggestions ?
For many of the Business Content dataflows there are not DSOs present, so ther e is no tip to get from the dokumentations as gfar as I have found.
best Regards
Ingrid

Hi Ingrid,
Your question will be perfect in case if you are going for a Custom cube.
You will not have any problem when you create a Datasource in R/3 level even if it is been built on a single table or on view.
Only point that you want to know how to design my Key fields in ODS.
This will be purely depends at what level that you want to bring the data.
Egg:-
If you run the data source in RSA3 and check for Each GL if you have 10 liine items and you want all the 10 line items to be transfered to BW.
In this case you need to check what is the unique combination of fields that is making this lineitems to exists as 10.then include all those fields into Your ODS Key Fields.
This way you can have 10 records for that perticular GL in both sides, by which u will make sure that the data is been completely transfered.
If in case if you clude your own Key fields then you will get the correct Total in report for each GL but you can't see all those 10 line items.
For any case you need to figureout how many records that you want to take into BW based on that check the fields that makes it unique and then add them to ODS Keyfields that will solve your requirement.
I think this will clear your doubt.
Best Regards,
VNK.

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
How to find the exact user-exit for your requirement.
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
The procedure to find the package name.
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
Checking if the user-exit is getting triggered or not.
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,

Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM

Re: Satellite A660-12P - can't find the right display driver for Win XP

Hey everyone, i need some help with this one:
I just made a dual boot Win7 (x64)/XP (x86) on my laptop, but i can't find the right display drivers for the video controller VGA compatible on XP.
Does someone know where i can find them?
Many thanks,

Yes, you get this message because you cannot install the nVidia rivers only executing the exe file.
If you want to install such drivers then you have to do this in device manager.
You have to force the notebook to choose the driver
You can do this choosing the advanced installation procedure which helps you to point to the driver files!
PS: might be helpful:
http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

How to find the profit center group for a profit center?

How to find the profit center group for a profit center?

Hi,
try this also
In order to pass the setid parameter of the FM, you have to concatenate the following things
Setid + KOKRS (Controlling area) + Profit Center Group into one variable.
In my example below, I have declared as constants and concatenating to gv_setid.
gc_01016 is the set id for profit centers
gc_kokrs is the controlling area
gp_pprct is the Profit Center group entered in the selection screen.
You will get KOKRS value from the cepc-kokrs.
data :   gc_0106(4)   TYPE c VALUE '0106',
           gc_kokrs      LIKE cepc-kokrs VALUE 'ABCD'.
           gv_setid          LIKE sethier-setid,
           gt_set_values_1   LIKE setvalues OCCURS 0 WITH HEADER LINE.
CONCATENATE gc_0106 gc_kokrs gp_pprct INTO gv_setid.
CONDENSE gv_setid.
CALL FUNCTION 'G_SET_TREE_IMPORT'
    EXPORTING
      client                    = sy-mandt
      fieldname                 = 'RPRCTR'
      langu                     = sy-langu
      setid                     = gv_setid
      tabname                   = 'GLPCT'
      no_table_buffering        = 'X'
    TABLES
      set_values                = gt_set_values_1
    EXCEPTIONS
      set_not_found             = 1
      illegal_field_replacement = 2
      illegal_table_replacement = 3
      OTHERS                    = 4.
By using the above FM you will get the values into gt_set_values1 once sys-subrc value eq 0, it is internal table which consists of all the profit centers for the proft center group.
Regards,
Venkatesh

How to find the existing request no for Smart form

Hi Experts,
plz tell me how to find the existing request no for Smart form in ABAP.
thanks in advance.
regards,
radhika.

Radhika,
Choose Goto > Object Directory Entry> Lock Overview On the Initial screen of the "smartforms" transaction, after entering the actual smartform. This would give you the request number for the smartform.
Regards
Narasimhan

How to find the E-Mail address for my HP 6700? Printer shows E-Print connected.

I got help on the board about getting a new printer code and the Home Printer page shows that it is on, but now I don't know how to find the E-Mail address for my computer -
This question was solved.
View Solution.

Hi,
From the printer Front panel, navigate to Setup. Locate and enter Web Services. Aprove any of the steps to enable the service... allow the device several minutes to complete the registration, a page will print automatically with the printer code and the directions to select the email address from hpeprint.com.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Where can i find the installation's files for photoshop element version 7

Where can I find the installation's files for Phtoshop element version 7 ?

This should help:
Download Photoshop Elements products | 9, 8, 7
Be sure to follow the instructions carefully.

How to find whether an OSS note is applied in the system?

Hi experts ,
Can anyone explain how we can find if an OSS note is applied in the system.
Please respond to the query, points will be awarded .
Best Regards
Anand

Hi Subodh,
Thanks for your reply and valuable information.
I could not checked for snote and SPAU as I am not authorized. suppose a note has been applied throgh SNOTE , can we find this note in the code ?
In my case a particular note is applied for MM02 but when I check code I could find several note but not the note being disuceed.
I will try to check with some one authorized for SNOTE in my client.
Thanks again.
Best Regards
Anand
Edited by: Anand Tripathi on Jan 19, 2008 7:52 PM

How to find the right kstat info & interpret it ?

Having found out how to read the kstat structures I am
still struggling with finding the right information which
makes sense!
I am interested in the following statistics:
0. Swap Space - similar to that reported by swap
1. Scan rate similar to that reported by vmstat
2. Handspread page (see Adrian Cockcrofts' performance monitoring articles)
3. Disk Space Usage - similar to df -k
4. Process memory usage -- ps
5. System Error Messages -- this may not be possible to read at all
from kstat. Probably here I will have to make do with reading /var/adm/messages
6. Disk Errors -- similar to iostat -E (Solaris 2.6 onwards)
7. Ethernet stats -- like netstat -I le0
I found the following article on SunSolve Online: FAQ 1230 'Three Virtual Memory Performance Monitors' which directs me to some of the kstat cell
types.
I started with swap space. The above article plus a few other pointers seemed to indicate the the
correct kstat struct and field to use here was vminfo.swap_avail
When I compared the figures dumped from this structure with those reported by vmstat & swap they
did not compare! eg.
kstat: vminfo.swap_avail 321393372929
kstat: vminfo.swap_free 33339822544
vmstat unix tool:
swap avail (KB) 19932
Furthermore sysinfo.h indicates that vminfo.swap_avail is expressed in pages.
1 page = 4.096 KB, so the kstat figures should be multiplied by 4 which makes
the comparison even worse. Whilst I don't expect the figures to be
an exact match -- I was hoping they would be in the same ball-park,
Next I tried page in/page out rate
Here I compared:
kstat: cpu_vminfo.pgpgin 473224
kstat: cpu_vminfo.pgpgout 14554
vmstat unix tool:
pi (page in) 4
po (page out) 0
These figures sort of match up, if you take the most sig digit in
vminfo.
I was wondering if anyone has a definitive list on what are the best
kstat fields to use -- and if any wierd and wonderful calculations must
be performed on any of them to get figures close to that supplied by
the familiar unix tools.

Hi!
I wrote a quick program to read the vminfo stats and like you saw completely crazy figures. I looked further into this and found that every second, the system clock routine adds the freemem, swap and so on to a cumulative total.
To put it another way, the figure you see for free memory is the sum total of the value of freemem sampled every second since your system booted.
Thus, to get the average freemem in pages since boot, you need to read the value of freemem and divide by the number of seconds since boot.
You can derive the number of seconds in two ways from the kstats:
(1) read lbolt (incremented every 100th sec) and divide by 100 (hz)
or (2) read sysinfo.updates (which is incremented every time the kstats are updated).
I have attached a sample program that demonstrates both of these and reports average freemem since boot in K (like vmstat).
Similarly, to get a 5 second average, take two readings of freemem and sysinfo.updates five seconds apart , then calculate
(freemem2-freemem1)/(updates2-updates1)
It seems most, if not all, of the system counters are cumulative in this fashion.
Hope that helps.
Ralph
SUN Developer Technical Support
<pre>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <kstat.h>
#include <sys/types.h>
#include <sys/time.h>
#include <sys/sysinfo.h>
#include <stdio.h>
main()
kstat_ctl_t *kc;
kstat_t *vminfo_ksp;
kstat_t *system_misc_ksp;
kstat_t *sysinfo_ksp;
kstat_named_t *lbolt_knp;
vminfo_t vminfo;
sysinfo_t sysinfo;
int hz;
int ltime;
ulong_t updates;
if ((kc = kstat_open()) == NULL)
perror("kstat_open failed"); exit(1);
/* get lbolt and divide by hz to get secs since boot */
system_misc_ksp = kstat_lookup(kc, "unix", 0, "system_misc");
kstat_read(kc, system_misc_ksp, NULL);
lbolt_knp = kstat_data_lookup(system_misc_ksp, "lbolt");
hz = sysconf(_SC_CLK_TCK);
ltime = lbolt_knp->value.l/hz;
/* get number of statistic updates so far (=secs since boot) */
sysinfo_ksp = kstat_lookup(kc, "unix", 0, "sysinfo");
kstat_read(kc, sysinfo_ksp, &sysinfo);
updates=sysinfo.updates;
printf("lbolt time %d\n",ltime);
printf("updates %d\n",updates);
/* get vminfo */
vminfo_ksp = kstat_lookup(kc, "unix", -1, "vminfo");
kstat_read(kc, vminfo_ksp, &vminfo);
printf("freemem %lld\n",(vminfo.freemem*4)/updates);
printf("freemem %lld\n",(vminfo.freemem*4)/ltime);
</pre>

How To Find The Right Server........

Hi Friend�s I am Again Here
I Have A Question. I have Tool That�s Work is To Check The Duplicate CDR from Three day�s dump and Then Load this CDR�s in Database. I runt his tool on 2.4 GHz System with 1GB ram and I got the result
74 CDR�s /see Processing.
This time I Have A problem that I need server to run this tool and I am not getting that how I calculate the right server so that I can get the result upto 500 CDR�s/see
How Much CPU I need and How Much Ram I Needed. As per My Knowledge this can run fine on 2*2.4 GHz dual core CPU with 8GB ram.
Is it Fine,,,,,,,,,,,,,,,,,,,
Can anyone Help to Find Right System for this tool.

Your post is hard/annoying to read. In English only the start of a sentence is capitalized. There is no need to capitalize every word within a sentence, unless required otherwise, like the pronoun "I" or the person/product names, e.g. "John Doe" and "Java".
Apart from that, your question has nothing to do with Java at all. Look for a CDR software forum or so.

How to find the Adobe barcode name for its corresponding SAP Script barcode

Dear All,
We are doing conversions from SAPScript to Adobe forms.
The barcode used in two sapscript forms are 'BC_CD39' and 'ARTINR' respectively .
I would like to know the corresponding barcode name to be assigned to Adobe forms as the above barcode names are not present in the Object Library-> Barcode section of Adobe forms.
regards,
PP

>
Muralidhar Medisetty wrote:
> Hi,
>
> I had an issue, in the transaction F110 Payment advice. They need to adjust the spacing on the cheque printing, which is overlapping the names on the cheque and hence I have forgotten how to find the form name and the driver program of the script. Can anybody suggest me how to find those. Your help will be appreciated.
>
> Thanks in advance.
hey
NACE is the transaction ..for this u must know the output type..
Script for Cheque Printing and Payment Advice can be known from Transaction FBZP...
FBZP -> paying Company Codes -> u will get Script used for Payment Advice
FBZP -> Pmnt methods in company code -> u will get Script used for Cheque Print
....Give points if useful.....
Edited by: Satyabrata sahoo on Oct 14, 2008 4:42 PM

How to find the right bapi.....

Hi everyone!
I'm having trouble in finding the right bapi for my program. I'm looking for a bapi that will create a sales order with reference to quotation no. and it seems dat, i dont have any background in bapi.. can someone help me to do this job? Can someone provide the right code for this problem? Thank you in advance..helpful reply will be given enough points..
Regards,
Mackoy

To find a BAPI:
Go to SE37.
Click on F4 in the input field.
go to Information Systems.
In the Function module name type keyword and press enter.
You will get a list of all the FMs containing that key word.
From these search the one you think is appropriate for your requirement.
This will be helpful in finding BAPIs/ FMs in future.
Regards,
Sonal
Reward points if helpful

How to find the list of Queries for that have statistics enabled in the sys

Hi ,
How to find the list of Queries that have statistics enabled on them in the system.
Please help me in this regard
Thanks
Maruthi

hi ,
I found three options there like
X - on
D - Default
off
can you please expalin the difference between on and Default
Thanks in Advance
Maruthi

How to find the right OSS Note for my SAP version

Similar Messages

Maybe you are looking for