How to find the sender information from a IDOC
Hello Colleagues
I have a list of IDOCs which are transferred by by ALE and EDI methods, the customer idocs are using EDI and internal buyers use the ALE technology.
I have to write a report which tells me which was the originating system/ source of the order, so I wanted to know is there a way that I can find the origin system of the idoc message.
I had a look into EDIDC but the sender port here is a self pointing RFC for the edi messages, any idea how to get the origin system here ?, however the ALE messages gives the correct sender. But in future we are planning to have XI for internal transfer for idoc will that also have the same problem.
Best regards
Sujoy
Hi ,
you can find receiver system details in partner profile , transaction we20.
the sender system details are
port = SAP+your systemID(can be found in login system details)
EX if i am using ides server(testing server) having system id ESR then port = SAPESR
partner number u can get by following the path
sale...>basic settings...>logical system....> assign logical system to client.
here you can find the logical system which is nothing but your partner number for a particular client.
Hope this helps you.
Thank you.
Regards,
Lokeswari.
Similar Messages
-
How to find the message_ID/Reference_ID from a IDOC number
hi
can some one tell me how to find the message_ID/Reference_ID from a IDOC number
regards
Buddhikehi,
check the t.code IDX5 .
also check the below link for reference
Monitoring the IDOC Adapter in XI/PI using IDX5
Monitoring the IDOC Adapter in XI/PI using IDX5
regards
kummari
Edited by: kummari on Jul 28, 2008 9:20 AM -
How to find the dsn name from an *.rpd file provided?
How to find the dsn name from an *.rpd file provided? All the ODBC details which would require to run your dashboard.
Hi
DSN name is not a part of .rpd file. So There is no information about DSN name in .rpd file.
Thanks
Siddhartha P -
How to find the data loaded from r/3 to bw
hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u allHi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV -
How to find the form name from VA02 T.code
how to find the form name from VA02 T.code
Hi Rajyam,
I guess you are looking out for the formname which prints sales related documents.
If this is what you want,then go to the T-code NACE and select the option K1Sales activities and click on the Output Types button on the top.The new window has all the types of Output types listed.Select the most appropriate and double click on the Processing routines button in the left side screen.
The new window lists the program names and the forms associated with that output type.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari. -
May i ask how to find the history website from safari in the new Mavericks?
may i ask how to find the history website from safari in the new Mavericks?
Choose Show All History from the History menu.
(93509) -
How to find the profile information of a icloud account user?
How to find the profile information of a icloud account user?
This would actually be the Apple ID information and is only available to the user.
-
How to find the group ids from which the mail has been sent
Hi,
We are able to see the list of mails have been sent to respective mail ids with the help of tcode SOST.
Is there any way to find through which group ids the mails have been sent.
Tehe details showing as the mail has been sent by Batchusr.
Please suggest how to find the group id from where the the mails have been triggered.
Regards,
Jena.Hi
This is not helpfull
If you open any notification QM03, there you will get tab " Action Log"
If you click on action log , there are two fileds
Date and time for task release
I want to fetch these fileds in one of Z report.
I am unable to find table name for these two fileds
Task release Date
Task release Time
Can we add 'QN CHANGE DATE' parameter in the selection screen (just like QN creation date) w/ range? The user want to run the report by QN change date as well. -
How to find the CPU utilization from the portal front end
HI Guys,
I want to find the CPU utilization from the portal front end browser screen.Can you please let me know how to find this and also the path to find it.
And how to find the CPU utilization from the server.What is the command to find the CPU utilization at unix level.
Regards,
Krishnam.hi you can create transient field in view object indicate to visibility of row (boolean ) and create view criteria that show only rows that are able to be visible according to transient attribute and at the update process set the attribute to true inside entityImpl class
-
How to find the extra spaces from personal computer?
I cannot update Adobe new items since the box window told me that there were no spaces from my computer. Who can teach me how to find the extra spaces from my computer? Besides, there are 1/3 spaces for IOS, 1/3 spaces for virtual computer and 1/3 spaces for Adobe in my computer. No any photos and movies in my computer now.
I do not understand the question... what do you mean by spaces?
What size is your hard drive, and what does your system tell you about unused hard drive space? -
How to find the hardware information of the Installed HANA Database using studio tool ??
Hi SAP HANA Experts,
How can we find the Hardware Information of the HANA Database using the Studio tool.
I mean, i want to find out the Hardware Information like CPU Model Number, RAM Size & HDD. { HANA Database is already installed as a standalone system } using the Studio tool.
Can any one of you please provide me the different possibilities to get the Hardware information.....Hello,
Try running the below SQL script in your HANA database. The output should have the info you havd been looking for.
SELECT
[NAME]
- HANA_Hosts_Overview
[DESCRIPTION]
- Host information
[DETAILS AND RESTRICTIONS]
[VALID FOR]
- Revisions: all
- Statistics server type: all
[SQL COMMAND VERSION]
- 2014/05/30: 1.0 (initial version)
[INVOLVED TABLES]
- M_HOST_INFORMATION
[INPUT PARAMETERS]
- HOST
Host name
'saphana01' --> Specific host saphana01
'saphana%' --> All hosts starting with saphana
'%' --> All hosts
[OUTPUT PARAMETERS]
- HOST: Host name
- BUILT_BY: Manufacturer name
- CPU_DETAILS: CPU details (cores, threads, speed)
- PHYS_MEM_GB: Physical memory size (GB)
- SWAP_GB: Swap size (GB)
- OP_SYS: Operating system type and version
- HARDWARE_MODEL: Hardware model
- CPU_MODEL: CPU model
[EXAMPLE OUTPUT]
|HOST |MANUFACTURER|ACTIVE|CPU_DETAILS |PHYS_MEM_GB|SWAP_GB|SEC_STORE|OPERATING_SYSTEM |HARDWARE_MODEL |
|saphana20|IBM |yes |80 (160) * 2395MHz| 4039.88| 32.00|available|SUSE Linux Enterprise Server 11.2|System x3950 X5 -[7143HDG]-|
|saphana21|IBM |yes |80 (160) * 2395MHz| 4039.88| 32.00|available|SUSE Linux Enterprise Server 11.2|System x3950 X5 -[7143HDG]-|
H.HOST,
MAX(CASE WHEN KEY = 'hw_manufacturer' THEN VALUE END) BUILT_BY,
MAX(CASE WHEN KEY = 'cpu_summary' THEN VALUE END) CPU_DETAILS,
LPAD(MAX(CASE WHEN KEY = 'mem_phys' THEN TO_DECIMAL(TO_NUMBER(VALUE) / 1024 / 1024 / 1024, 10, 2) END), 11) PHYS_MEM_GB,
LPAD(MAX(CASE WHEN KEY = 'mem_swap' THEN TO_DECIMAL(TO_NUMBER(VALUE) / 1024 / 1024 / 1024, 10, 2) END), 7) SWAP_GB,
REPLACE(MAX(CASE WHEN KEY = 'os_name' THEN VALUE END), 'SUSE Linux Enterprise Server', 'SLES') OP_SYS,
REPLACE(MAX(CASE WHEN KEY = 'cpu_model' THEN VALUE END), '(R)', '') CPU_MODEL,
MAX(CASE WHEN KEY = 'hw_model' THEN VALUE END) HARDWARE_MODEL
FROM
( SELECT /* Modification section */
'%' HOST
FROM
DUMMY
) BI,
M_HOST_INFORMATION H
WHERE
H.HOST LIKE BI.HOST
GROUP BY
H.HOST
ORDER BY
H.HOST
Rgds,
Mat. -
How to find the Purchase Orders from Sales Order number
Hi ...
Is there a way to write a query to find the Purchase orders
from the Sales Order number ....
I have notice the table POR9 (Purchase Order - base Document)
but it seems to be empty.
Could you please help me to figure this out,
Thank you very much
Kind Regards
Sanjayahi,
u did mistake in selecting the table
SELECT T0.DocNum FROM ORDR T0 for sales order
SELECT T0.DocNum FROM OPOR T0 for purchase order
how to find the table in SAP B1.
go to above menu view => system information. tick it(or select it)
then below status bar u can see the table and field name.
open the required form and just keep the mouse cursor on any field.
you can see the table and field name below.
hope now u can able to track the table name.
regards
sandip -
How to find the tomcat path from registry?
Hi,
How can I find the tomcat path from registry?
please tell me.
Thanks
Gaurav Agrawalgauravjlj wrote:
listen,
I'm about to create a exe which will do these things.....
1. first install java
2. install tomcat
3. install mysql
4. deploy my web application with out use of tomcat manager
first three steps I have done with the help of installer maker. let assume that my tomcat has been installed. but now please tell me how can I deploy my web application.
that's why I need the tomcat path.
please tell me.Well, if you've just installed Tomcat you do know where it is so what's the problem? Why not, in fact, include your application in the tomcat directories as you install them? That's all there is to installing tomcat, installing the directories, setting %JAVA_HOME% and (possibly) running the service.bat file. -
How to find the costliest course from the below table.
dear experts,
please help me to find the costliest course from the below data
COURSE CCOST
pgdca 4500
dca 7200
mca 22000
dcp 5000
pgdca 4500
dap 6200
dcap 5200
hdcp 14000
pgdca 4500
dca&p 11000Then read the FAQ for how to post a question on the forum.
1. You didn't say anything about using an Oracle database or what your 4 digit version of Oracle is.
2. You didn't provide a table name, the table DDL or insert statements to create the table and data
3. You didn't post the queries that you tried to write and tell us whether they work or not.
4. You didn't tell us when this homework assignment is due or that you needed a query.
This isn't a coding service. The forum is to help you with questions or issues you are having with YOUR queries.
No one can write a query without having a table. If you want help post the info requested above. -
How to find the TECHINICAL INFORMATION of a CHECK MARK
Hi Guys,
How to find a technical information of a check mark on screen. I tried F1 AND click techinal field it showing wrong information.
Thankshey guys,
This is a very common problem, you need to hold the mouse-click on the CHECK-BOX when you tick it, and while holding the click you hav to press F1.
Do reward points, if useful and close the topic.
Regards-
Naimesh Kundanani
Maybe you are looking for
-
Noted Items in customer line item report
Hi Friends, What is noted items? what is this use ? i have seen in fbl5n screen ( customer line item report) in type selection. please give u r reply on this i will assign points to you. Thahnks KSR
-
Transfer from one Mac to another
I'll be buying a MacBook Pro in a few weeks, and will transfer the data from my Black Book to that when I initially connect the machines (I assume via Firewire with a 6-pin-to-9-pin cable). But I'm going to give my Black Book to my daughter, who'll b
-
2lis_08trfkz -vstel ShpPtDeparture
Hi, Field VSTEL is coming up with no results to BW system. Also, when extract from RSA3 in R3, no value is shown up. can you advise? thanks sp
-
Hi Everybody, This is SundeepKumar.P and I'am new to Module pool. Can anybody send me the documentation on step by step process with a very goood explanation on Module pool. It will be helpfull for me if anybody help me in this. I will reward them wi
-
CC geeft aan Lightroom CC(2015) up to date maar het programma wil niet opstarten.
Ik heb via de Cloud Lightroom CC(2015) gedownload en geïnstalleerd, en de Cloud geeft aan dat het downloaden en installeren up to date is maar ik krijg Lightroom niet opgestart. Ik heb het al 3x verwijdert en wederom geïnstalleerd maar niets helpt. W