How to find the size (and sizelimit) BPS web interface
Hello.
We have build an application with the SEM-BPS webinterface builder.
In the past we had problems with the size off this application. After we had added some new tabs in the application the size limit had been exceeded and the web inteface could not been activated. So we had to remove the new tabs into a new webinterface.
Now we have to add again some new tabs into the webinterface application. That brings up some questions.
Wat is the sizelimit of the webinterface application?
Can we change this limit?
How can we know the size off the current application?
How can we find out the size of a separate tab in the webinterface? (So that we can make a prediction of the size which will be added to the web interface)?
Thanks and regards,
Eldo.
Trevor.Dennis wrote:
John, are there already differences? I thought 13.1 was mainly about retina display support, but I guess there would also be other fixes released while they were at it.
Yes, definitely already differences. I sympathize with Photoshop instructors (online and offline).
The headline change was Retina support but that was also made available to non-Cloud versions.
Other Cloud-only changes in 13.1 are listed here
http://helpx.adobe.com/photoshop/using/whats-new.html
http://psd.tutsplus.com/articles/news/cs6_1/
Non-Cloud CS6 users have been very vocal and disgruntled about some of these changes.
Similar Messages
-
How to find the size and resolution option in the aspect ratio drop down menu for the crop tool
while looking through certain tutorials on the new crop system i came across many that referenced the above mentioned size and resolution option in the access ratio drop down menu. They all mention a dialog box which then appears which looks really useful, however my version doesnt have this option. any help would be appreciated.
Trevor.Dennis wrote:
John, are there already differences? I thought 13.1 was mainly about retina display support, but I guess there would also be other fixes released while they were at it.
Yes, definitely already differences. I sympathize with Photoshop instructors (online and offline).
The headline change was Retina support but that was also made available to non-Cloud versions.
Other Cloud-only changes in 13.1 are listed here
http://helpx.adobe.com/photoshop/using/whats-new.html
http://psd.tutsplus.com/articles/news/cs6_1/
Non-Cloud CS6 users have been very vocal and disgruntled about some of these changes. -
How can i find the size and contents of playlist created by genius?
How can i find the size and contents of i-tunes playlist created by genius?
Have a look at this article written by the CEO of our company (MoviMED):
http://www.qualitymag.com/articles/91010--d-imaging-enters-the-machine-vision-world?v=preview
What is the object you are going to be making with the CNC? Is it a cube? Is it an intricate statue?
Are you making an object with a CNC, or just mounting a camera to a CNC to image the object?
www.movimed.com - Custom Imaging Solutions -
How to find the size of an arrayList through Expression Builder.
Hai OTN,
How to find the size of an arrayList through Expression. I have a managed bean in View Scope.I am using Jdeveloper 11.1.1.2 with ADF Faces components.
Managed Bean :
ArrayList<IllnessEmployeesObj> employeeGridList =
new ArrayList<IllnessEmployeesObj>();
JSPX :
Value="#{viewScope.PandIVH.employeeGridList.size}"
Error : java.lang.NumberFormatException: For input string: "size"Hi Dinil,
I have provided you with a sample that would show you the how you can get the size of an arraylist
the sample has a page untitled1 and a bean named test.
I have run in on jdev 11.1.2 and it is ok, it will be ok on 11.1.3
after running the sample you will see the 2.
please remember that you must add the JSTL taglib on the viewcontroller.
just right click on viewcontroller, go to tag lib select the jstl.
page
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@ page contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsp/jstl/functions" prefix="fn"%>
<f:view>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/>
<title>untitled1</title>
</head>
<body>
<h:form>
<h:outputText value="#{fn:length(test.a)}"/>
</h:form>
</body>
</html>
</f:view>
bean
import java.util.ArrayList;
public class Test {
public Test() {
a= new ArrayList();
Object o=new Object();
a.add(o);
a.add(o);
ArrayList a;
public void setA(ArrayList a) {
this.a = a;
public ArrayList getA() {
return a;
I hope this sample came handy.
regards, -
How to find the header and item level status of a CRM contract ?
Hi,
Few questions
A. How to find the header and item level status of a CRM contract ? My req is to select all the contract line items which are in CLOSED status.
B. How to get the BPs associated with a contract ?
Anyone have the list of CRM tables and the relation amongst them. Please mail me in [email protected]CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
Note:
1. It doesnt store the Business Partner
responsible for the transaction. To
get the Partner No, link it with
CRM_ORDER_INDEX.
2. This table can be used for search
based on the Object Id(Business
Transaction No).
CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
CRMD_LINK Transaction GUID set for all the Business Transactions
CRMD_ORDER_INDEX Contains Header as well as Item details for a Business Transaction.
Note:
1. It doesnt store the Business
Transaction No (Object ID).
To get the Business Transaction No
link the table with
CRMD_ORDERADM_H
2. This table can be used for search
based on the Partner No
CRMD_ORDERADM_I Stores the Item information for a Business Transaction. The scenarios where we have a Contract Header and within contract we have Line Items for the contract, this table can be useful.
E.g. Service Contracts
CRMD_CUSTOMER_I Additional Site Details at the Item Level of a Service Contract
Pl.reward points....... -
How to find the size of the pipe. I mean the total number of bytes/messages available in the named pipe?
NAVEENI'm afraid this forum for Microsoft Project Customization and Programming is not the correct forum for your question. Please Choose correct forum in order
to get help from experts. I think your question is more relevant to SQL server
kirtesh -
How to find the Date and Time of Modification of Column in aTable?
Hi all,
Do you know how to find the Date and Time of Addition of Column to a Particular Table?.
I know however, How to find the modification time of the Table. Using the below Query :
Select Object_Name, to_Char(Last_DDL_TIME, 'DD-Mon-YYYY HH24:MI:SS') Last_DDL from User_Objects where Object_Type = 'TABLE';
Object_Name
Last_DDL
Employee
20-Aug-2013 09:23:03
I wanted to know the Creation or Modification Date and Timestamp of all columns of Employee Table?. Is it possible at all. If possible, How to get it?.
Regards,
Bhaskar MI agree with you on that. Since its a development enviornment I can remove the column but that not my point here.
My whole purpose it to know whether we get the Column's Creation or Modification DateTime. -
How to find the job and job status from RSPCM
hi all,
suppose we got an error and in rspcm the process was failed.i want to know the status of that particular job.and if any i want to stop that job in SM37.
plz tell me how to find the job and job ststus from RSPCM...and how to stop that job in SM37
thanks,
jackHi Jack,
RSPCM: T.Code
This transaction is used to monitor the process chains
First:
here you need to add the process chains into the sheet
Second:
Then you can monitor the process chains in this transaction code
Like you can see the : status ,proces chain ,Last run date ,Last run time ,Log ID
Status : Green when sucessful,Yellow when running & Red when you get errors
Now when yoy click on any of the process chain in RSPCM you will go to the LOG VIEW as you see in RSPC transaction
SM37:T.code
This transaction is used for Job Overview
you can see many options in SM37
like Released,active,cancelled,finished,etc
Just select the ACTIVE jobs and also pass STAR in JOB ID & USER ID
here you can only see the active jobs
Goto Step in toolbar
select the program displayed
then chose option GOTO - Variant in main menu bar
in the variant you can see the job belong to which Process chain
if you want to cancel this job come back to SM37 Display screen
Select the Job and select the JOB DETAILS tab in Tool Bar
Collect the WIP ( Work Permit ID)
Go to SM50 T.code and find the WIP
in Main Menu Bar you find the option Cancel with Core choose this it will cancel the Job
Regards
Hari -
How to find the Project and wbs Element System Status
Hi all,
How to find the Project and wbs Element System Status.
We can find the system status in the CJ20n transaction but I want the table and field name where it is stored.
Regards
RaghavendraHi,
try table <b>jest</b> with key = prps-objnr
Andreas -
How to find the font and replace another font using javascript in illustrator?
Dear All,
how to find the font and replace another font using javascript [batch process] in illustrator?
i have 700 image file, it very deficult replace one by one.
regards,
.Suresh.SAsk the creator of the file for a unprotected version.
-
How to find the columns and tables used in a stored procedure?
Hi,
Can someone suggest how to find the columns and tables used within a stored procedure?
Thanks
VBKFor example:
SQL> create or replace
2 procedure p1
3 is
4 cnt number;
5 begin
6 select count(*) into cnt from emp;
7 end;
8 /
Procedure created.
SQL> select referenced_owner,
2 referenced_name
3 from dba_dependencies
4 where owner = 'SCOTT'
5 and name = 'P1'
6 and referenced_type = 'TABLE'
7 /
REFERENCED_OWNER REFERENCED_NAME
SCOTT EMP
SQL> SY. -
How to find the size of a database?
I'm not an oracle dba but a report developer. I'd like to find out the size of my database.
Is this possible using simple query?francislazaro wrote:
I'm not an oracle dba but a report developer. I'd like to find out the size of my database.
Is this possible using simple query?There are many threads related to the same topic,
http://forums.oracle.com/forums/search.jspa?threadID=&q=How+to+find+the+size+of+a+database&objID=f61&dateRange=all&userID=&numResults=15&rankBy=10001
HTH
Aman.... -
How to find the jre and j2ee version on RAD?
How to find the jre and j2ee version of RAD 6.0?
Hi Zhenglin,
You meen to say we have to create two custom fields, one each for the latitude and longituude. Once created, how do we upload the latitude and longitude based on address could you please expalin by giving some sample code.
Thanks in advance.
Thanks and regards,
Deepika C -
How to find the source and target systems of an imported Transport Request?
Hello,
How to find the source and target systems of an imported Transport Request?
chinna.Hi Chinna,
In your landscape the TMS must have configured.Let assume that you have four six systems in the land scape.
DEV->DEV1->QUA->PRD and other two systems (TR1 ,TR2)are at different domain amd both are connected to QUA and the requests are forwarded from there.Here normally the flow willl be from DEV to DEV1, then DEV1 to QUA and QUA to PRD.For other two systems (TR1 ,TR2 )the source system will always be QUA.
Regards
Ashok -
How to extract the size and date from a given file
Hi,
I want to extract the size and date of a file (it can be either a video, audio or text file) that the user points to the location of. But I am not sure how. Does Java have an api that can do this? If not is there some other way of doing this? Can anyone help? Thanks in advance.Have a look at java.io.File, specifically
public long lastModified()
This format returned (I find) is nasty, so then use java.util.Date (or java.sql.Date, look the same on the surface to me) to format it.
Cheers,
Radish21
Maybe you are looking for
-
my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility
-
Can't Join Windows Intune from Windows 8.1
I have an intune account for my company and we used to have Intune Endpoint Protection on Windows 8, I have installed Windows 8.1 and I found out that I cant install the client but I have to join a workplace from the PC Settings, everytime I try to e
-
Problem setting maximum characters for a date field.
Good morning all. I am trying to ensure that a date field on the form I am working on validates if the entry is not more than 8 digits, and if it is more, it should display a message, and return the focus back to the field until it is correct. Below
-
Java to access Webservice Data control?
We created a Data Control from a Web Service. My question is can one use this Data Control using POJO. I think you should be able to do it but cannot find good documents or examples. Any pointers is much appreciated.
-
Adobe Professional 8.1.4 won't update to 8.1.5
I have Adobe Reader Professional that is currently version 8.1.4. When I go to Check For Updates I see that there is an update to 8.1.5 (CPSID_49013). When the download tries to install I get a message that says "The installation process has encou