How to find the size of the master data objects in the BW system?
Hi,
We would like to understand the size of the master data tables overall for a specific source system (Logical name is Ex.ABCD, which supplies all master data to BW). Can you please advise the procedure to find out this?
Is there any table that will allows to see all the master data objects related to specific sources system so that we can find out that table size? Thanks.
For example, we have many Texts, Hier & Attributes.
0COUNTRY_TEXT
0REGION_TEXT
0PERSON_ATTR
0MATERIAL_LPRH_HIER
Advance Thanks.
Edited by: BW USA on Feb 2, 2010 10:52 AM
Hi,
You can find out all the master data tales used in the BW system by
Tcode : SE11
Enter as /BIC/P* for master data tables and press F4 which gives list of master data tables currently used in BW system.
Similarly for Texts /BIC/T* and press F4
Similarly for Hierarchies /BIC/H-* press F4
and can know the size of the all tables.
Thanks,
Gopal
Similar Messages
-
Turning off the text for a master data object
What happens if we turn off the texts for a master data object? (In RSA1, under info objects - double click on info object and go to Master data/texts tab and untick the 'with texts' box). Are there any risks in doing this? Has anyone performed this and run into any issues? Thanks
Hi,
There are no issues in turning off the texts, but if its an object that requires description in the report, say material, plant etc, then you won't have that available as the texts are disabled and not loaded.
Cheers,
Kedar -
How to Display the ColumnName for the Text of any Master Data Object in BEx
Hi Experts,
In Bex Analyzer While Displaying the Key and text of any Master data object it shows column name for master data key but not for the text, here client requirement is he wants to see the Text column name as Description for any master data text.
say Customer Number is a master data object , while displaying key and text of CustomerNumber - column names should look like as below
CustomerNumber Description
C11111 Pepco
C11112 Coke
but usually in Bex Analyzer it displys as following(Text without column Name)
CustomerNumber
C11111 Pepco
C11112 Coke
Please suggest how can we achive this requirement, thanks in advance.
Regards,
ChandraHi Chandra,
I suggest you to enhance your datasource with text feild, by adding text feild to your datasource in ECC side and replicate it ti BI side.
For this you have to write code at CMOD.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/302d4b15-5847-2a10-93bb-9c45d9f06b16?QuickLink=index&overridelayout=true
Better this doc will help you.
Regards,
rvc -
How to find record for deleted credit master data?
Some credit master data been deleted.
While do SAP has report to show the deleted credit master data? when deleted? and by who?
Thanks!Hi,
You can find out all the master data tales used in the BW system by
Tcode : SE11
Enter as /BIC/P* for master data tables and press F4 which gives list of master data tables currently used in BW system.
Similarly for Texts /BIC/T* and press F4
Similarly for Hierarchies /BIC/H-* press F4
and can know the size of the all tables.
Thanks,
Gopal -
How do I load SIDs into a Master Data Object?
Hi again,
I created an InfoObject WCUSTOMER with 0CUSTOMER as template (NOT reference). That means the structure of these two objects should be identical. Now I want to load WCUSTOMER also with the same data.
I loaded WCUSTOMER with attributes and texts using the InfoSources 0CUSTOMER_ATTR and 0CUSTOMER_TEXT. But of course, SIDs are missing. Otherwise I won't see any data because WCUSTOMER does not know which attribute tables to refer to. Right?
Now how do I get these SIDs into WCUSTOMER? I can see that apparently 0CUSTOMER is using a DataSource called 0CUSTOMER_LKLS_HIER for that purpose. But (1) the BI does not offer me a chance to use this DataSource as well for WCUSTOMER and (2) it wouldnt even make sense because 0CUSTOMER and WCUSTOMER would then refer to the same set of attribute tables which was not the purpose of creating a separate InfoObject for Customers. Right?
So how can I manage to get some SIDs into my WCUSTOMER object in order to use the attribute and text tables I already filled with data?
I hope someone can give me a hint. I'll assign points of course...
StefanHi Jürgen,
How did you look at the data ? (Right click on
Infoobject to "maintain master data")
Yes, that is what I did. I also went into the InfoObject under "Masetr Data/Texts" and double clicked the three tables listed there.
Did you activate the maser data ? (Right click on
Infoobject to start from context menu)
Just activated it, but still no other result.
Did you load any "Text" for WCUSTOMER ? The text is
what is shown in a bex query, not any attribute (at
least not initially).
I did load the texts. I haven't tried to see them in the Bex Explorer.
Transaction SE16 show the content of a table. I don't
know the table where you will find customer data in
R3.In BW you can look at the data of your WCUSTOMER by looking at
table /BIC/PWCUSTOMER (at least if your name space is
configured similar to ours).
Yeah I checked the table. But also no data visable.
I also checked the list of requests. All they tell me is InfoSource and Datasource, etc. Nothing I wouldn't have expected.
Two things I will have to try:
1. really check if there is data in the R3
2. export 0Customer data and load it as a flatfile.
Cheers,
Stefan -
How to load data for attribute of Master Data Object from PSA
Hi Experts,
I have a Master data Object, 0Equipment.
I loaded data to PSA from R/3.
I am able to see records for Zxxx field in PSA.
I have added a new mapping object Zxxx in BW.
But, when I loaded the data from PSA to Master Data Object, 0Equipment,
I am not able to see records for Zxxx which is an attribute of 0Equipment.
I do see the records for rest of the attributes of this Master Data Object.
I tried deleting and reloading the data
and treid to check attribute change run
Please let me know if I am missing something in loading the Master Data from PSAJr Roberto,
I checked all the records in Maintain Master Data and did set the Zxxx Not Equal To Blank.
No data for Zxxx InfoObject, eventhough there is data in the corresponding field in PSA.
I did 1:1 mapping.
Need help -
How to handle heavy load caused by master data in XI
Hi all,
We have a situation where masterdata has to be send through XI. As you all would agree, the initial load for master data (done through the BD10,12,14 etc) is heavy. Even though we have low priority queues defined in our XI server for master data, our servers performance is getting affected heavily. Any suggestion to improve the situation would be highly appreciated.
Thanks in advance
cheers
danusHi Danus,
We manage this on the R/3 side. Schedule multiple jobs to run BD10 at spaced intervals of time with different variants. For example:
10:00 - Materials 1 - 10000
10:15 - Materials 10001 - 20000
10:30 - Materials 20001 - 30000
Thanks,
J Wolff -
Loading from ODS to Master data Object
Hi Friends ,
Please let me know how to load from ODS to a master data object.
Thanks,
krishnaHi Krishna,
If your master data is enabled as "Infoprovider" then you can use an export datasource on the ODS and load the data into your master data.
I am not sure if it will work if the master data info-object is not enabled as "Infoprovider".
The other mechanism would be to use an infospoke to download the ODS data into a flatfile. And then use the flatfile to upload the master data.
Hope this helps.
Bye
Dinesh -
Infoset on two Master Data Objects
Hi,
I have two Master data objects one is time dependent ZABC and another master data object 0Material.
Currently I have a report on ZABC which is time dependent master data object which is built on complex logic to get the data.
There is a time interval variable in the selection list.
Business does not allow me to modify the time dependent master data (ZABC) that means to add new attributes division and Material deletion flag.
The ZABC object does not have Division and Material Flag for Deletion attributes.
The business requirment is to add Division and exclude materials which are marked for deletion as 'Y' to the existing report.
Since Division and Material Flag for Deletion is not there in ZABC, I have gone for Infoset between time dependent master data object and 0Material and did left outer join (which pulls all the records from time dependent master data object) and the join condition is Material.
I built new report in query designer exactly like the current report.
When I run both the reports , the newly developed report is not pulling exactly the same records as the current report.
New report is pulling extra records. I mean the new report should pull only the records which are in the time interval.
This is the issue. Please help in this regard.
Thanks
MadhavHi,
I could resolve the issue.
Thanks & Regards,
Madhav -
How to find active master data source in the bw system
Hi
Can anyone guide me how to find the active master data source in the bw systemHi,
You can use the table ROOSOURCE. The field ROOSTYPE specifies the type of datasource whether Transaction or attributes or text. You could write an abap program to filter the table and give you only master data datasources.
Assign points if helpful
Regards. -
How can I reduce the size of a PDF in Preview without the pics turning green?
How can I reduce the size of a PDF in Preview without the pics turning green?
Do you have to use Preview or would a third party utility like PDFShrink be acceptable?
(Also look at the Similar Softwar section on that page I linked to.) -
Cannot find Master Data folder in the SAP Netweaver
Hello,
I need to create Open Catalog Interface (OCI) punch out system for our web shop. In order to test it I need SRM server that can call our web shop. I have downloaded this SRM software and installed it in my local computer:
ABAP_Trial_7_02_SP11_Win_64_bit_Version_with_Gateway_2_0_SP04
But I cannot see the Master Data folder inside the SAP Easy Access. Does that mean SAP SRM server has not been installed on my computer? If yes, how can I install it? Can i have it for free or I should pay for it?
Best regards,
KevinI'm having the same problem. As far as I know the only version of ODAC that I have installed is 11.2.0.3. What version did you ultimately install?
What I have:
- Visual Studio 2010 Ultimate
- .Net framework 4
- Entity Framework 4
- 64 Bit ODAC 11.2.0.3
Any help is greatly appreciated!
Austen
Edited by: AHowell1337 on Jan 2, 2013 7:25 AM -
Command for "How to find Cursor Size" in Oracle Stored Procedure"
Hi
Can u tell me....
How to find Cursor Size" in Oracle Stored Procedure........
I want command for that........why don't you try select count(*) from your_table;That requires running the same query twice - or rather running two different queries twice. Besides it still doesn't guarantee anything, because Oracle's read consistency model only applies at the statement level (unless you're running in a serialized transaction).
This is such a common requirement - users are wont to say "well Google does it" - it seems bizarre that Oracle cannot do it. The truth is that that Google cheats. Firstly it guesses the number on the basis of information in its indexes and refines the estimate as pages are returned. Secondly, Google is under no onus to kepp all its data and indexes synchronized - two simultaneous and identical queries which touch different Google servers can return different results. Oracle Text works the same way, which is why we can get a count with CTX_QUERY.COUNT_HITS in estimate mode.
Cheers, APC
blog: http://radiofreetooting.blogspot.com
. -
Identifing duplicate master data records using the MDM Import Manager
hi all
I read the Topis "How to identify duplicate master data records using the MDM Import Manager</b>"
i tried to create import maps and to set rules. but when i import them it creates the new vendor records for each rule with rest of the fields blank.
when i import vendor data all the three fields i.e Match rate , match type and match group are blank.
My Question is :
I am getting vendor data from SAP R/3.
In which source (in lookup xml file or data xml file) do i have to include these above three fields and how all the rules will be reflected in repository?Hi Sheetal
Here we go when do you Import any data (vendor master) please follow the following steps;
1. First of all apply the map to the source data
2. In the Match Record tab there are 3 possiblities
a.[Remote Key] : Checks the current source rec with
repository along with all the fields - This is
default
b.Remove [Remote key] - by double click the same; and
choose any single fields like Vendor Number or
name - Then the current record will be matched
with the repository based on the field.
c.Instead of single field you can choose combination
also.
3. Based on the Match results, match class will be set
automatically;
a. None
b. Single
c. Multiple
4. Then Match Type
a.Exact-All the individual value matches are Equal.
b.Partial-At least one value match is Equal and at least one Undefined; no value matches are Not Equal.
c.Conflict-At least one value match is Equal and at least one value match is Not Equal.
5. then chek the Import status and Execute the import.
Hope this helps you.
cheers
Alexander
Note: Pls dont forget reward points. -
Hi Folks,
can any one please tell me how can i delete a particular keyfigures data i na master data object.
just i loaded wrong data to the keyfigure.i want to delete the whole data for the keyfigure only.so any one please help me .its very urgent.
Thanks in advance.
ashok.Hi Ashok,
you cant delete particular attribute (as keyfigure in ur case..) data for particular master data.. you need to delete entire master data once.. but before that you need to delete transactional data related that master data.. and then load once again with the correct data...
but you can't delete particular attribute(key figure data)...
otherwise.. you can load once again the correct data.. because.. if you load same data means master data will just ovverwrite the previous data so, you can try with this option also..
regards
@jay
Maybe you are looking for
-
How can I include a dynamic content in the page fragment?
My header.jspf contains codes similar to the following in the init() method: Object o =getValue("#{sessionScope.username}"); if(o!=null){ greetingStaticText.setRendered(true); }else{ greetingStaticText.setRendered(false); But this code is not working
-
Adopmnctl.sh script is executing with status 2
while starting oracle EBS 12R the script adopmnctl.sh is executing with status 2
-
Could you please tell me if there is a way in Berkeley db Java Edition (in DPL APIs if possible) to choose which file structure to use for my application in the back-end (i.e. B+tree, hash table, Record number). Or, Is it done automatically by the sy
-
Getting PSE7 for Windows to work on a Mac
Is it possible for it to work, if my package only says for Windows XP and Windows Vista?
-
9iDS Forms - Cannot Run Forms In Forms Builder
Attempting to run and test a form using 9iDS Forms Builder, only get a blank screen. Any suggestions ???