How to find the SOAP Action

Hi,
I am using the follwoing wsdl in my scenorio:
http://www.webservicex.net/CurrencyConvertor.asmx?wsdl
From this wsdl file, how we can find out what is 'SOAP Action' ( which will be maintained in Configuarion SOAP adapter)
Regards
Arvind

Hi,
click on the link
ctrl + F
operation
Regards,
michal

Similar Messages

  • How to find the Contract Start date

    Hi Friends,
    with the help of the Transaction type, Item Category,reference Interest rate, how to find the Contract Start date/Billing Strat date and the Contract number.
    Regards,
    Raju.

    Hi
    naj you can find the contract start date and billing date in crmd_order Financial details data tab, start of contract and Billing and the contract no u will find after Approval of Eligibility Norms, then save go to actions create certificate of acceptance the you will get contract number
    Reward with Points
    Venkat

  • What must be the SOAP Action for Soap Receiver?

    Hi,
    Below is part of wsdl file. I'm using mtd1 method in it.
    This is an Axis generated wsdl.
    part of wsdl
    <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://schemas.xx.com/yy/Wsdl">
       <wsdl:types>
          <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:acbase="http://schemas.xx.com/yyTypes" targetNamespace="http://schemas.xx.com/yy/Types" elementFormDefault="qualified">
    What must be the SOAP Action for SOAP Receiver?
    Thanks

    >
    Cemil Bozlagan wrote:
    > Hi,
    > Below is part of wsdl file. I'm using mtd1 method in it.
    > This is an Axis generated wsdl.
    >
    >
    > part of wsdl
    > <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" targetNamespace="http://schemas.xx.com/yy/Wsdl">
    >    <wsdl:types>
    >       <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:acbase="http://schemas.xx.com/yyTypes" targetNamespace="http://schemas.xx.com/yy/Types" elementFormDefault="qualified">
    > ....
    > ....
    >
    >
    > What must be the SOAP Action for SOAP Receiver?
    >
    > Thanks
    find you answer here - /people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009

  • How to find the job details?

    Hi,
    Can any one pls tell me how to find the job details.
    Im getting the following error.
    ORA-12012: error on auto execute of job 2523287
    ORA-01031: insufficient privileges
    but, when im connecting as sysdba adn do following it was showinfg no rows selected.
    SQL> select * from dba_jobs where job=2523287;
    no rows selected
    SQL> select * from all_jobs where job=2523287;
    no rows selected
    How to find the job details of the job 2523287?
    Thanks in advance.
    Jishnu

    yeah, trc file is there
    I found the following info in that
    *** ACTION NAME:(EDX_PURGE) 2009-11-08 22:00:00.411
    *** MODULE NAME:(DBMS_SCHEDULER) 2009-11-08 22:00:00.411
    *** SERVICE NAME:(SYS$USERS) 2009-11-08 22:00:00.411
    *** SESSION ID:(683.4258) 2009-11-08 22:00:00.411
    *** 2009-11-08 22:00:00.411
    ORA-12012: error on auto execute of job 2523287
    ORA-01031: insufficient privileges

  • How to find the group ids from which the mail has been sent

    Hi,
    We are able to see the list of mails have been sent to respective mail ids with the help of tcode SOST.
    Is there any way to find through which group ids the mails have been sent.
    Tehe details showing as the mail has been sent by Batchusr.
    Please suggest how to find the group id from where the the mails have been triggered.
    Regards,
    Jena.

    Hi
    This is not helpfull
    If you open any notification QM03, there you will get tab " Action Log"
    If you click on action log , there are two fileds
    Date and time for task release
    I want to fetch these fileds in one of Z report.
    I am unable to find table name for these two fileds
    Task release Date
    Task release Time
    Can we add 'QN CHANGE DATE' parameter in the selection screen (just like QN creation date) w/ range?  The user want to run the report by QN change date as well.

  • How to find the number of data items in a file written with ArryToFile function?

    I have written an array of number in 2 column groups to a file using the LabWindows/CVI function ArrayToFile...Now if I want to read the file with FileToArray Function then how do I know the number of items in the file. during the write time I know how many array items to write. but suppose I want the file to read at some later time then How to find the number of items in the file,So that I can read the exact number and present it. Thanks to all
    If you are young work to Learn, not to earn.
    Solved!
    Go to Solution.

    What about:
    OpenFile ( your file );
    cnt = 0;
    while ((br = ReadLine ( ... )) != -2) {
    if (br == -1) {
    // I/O error: handle it!
    break;
    cnt++;
    CloseFile ( ... );
    There are some ways to improve performance of this code, but if you are not reading thousands of lines it's quite fast.
    After this part you can dimension the array to pass to FileToArray... unless you want to read it yourself since you already have it open!
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • How to find the number of entries in a master data table

    Hi Experts,
    I am trying to find the entries in 0CUSTOMER master data.
    BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
    I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

    Hi Dev,
    Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
    Hope this helps.
    Thanks and Regards
    Subray Hegde

  • How to find the number of links in a website

    hi every body
    can any one clear my doubt
    my doubt is that
    in a website how to find the number of links the hole website contains
    is there any navigation tool to find that
    plz help me yar
    i am waiting for the reply

    If you're talking about commercial sites (sites you don't have the source code for) I'm not sure.
    If you want to count the links in site that you have the source code for, it should be relatively easy to write a Java application to do it. All you really need to do is have a list of the files you want to count links in, read each file line by line and check for the existance of the <a> tag in each line. Anywhere their is an <a> tag there is a link.
    Hope this helps.

  • How to find the number of times method being called.....

    hi,
    can any one pls tell me how to find the number of times the method being called......herez the example....
    Refrence ref = new Refrence();
    for(int i = 0;i < arr.length; i++){
    if(somecondition){
    ref.getMethod();
    here i want to know how many times the getMethod() is calling...Is there any method to do this.. i have seen StrackTraceElement class..but not sure about that....pls tell me the solution....

    can any one pls tell me how to find the number of times the method being called......
    herez the example.... http://www.catb.org/~esr/faqs/smart-questions.html#writewell
    How To Ask Questions The Smart Way
    Eric Steven Raymond
    Rick Moen
    Write in clear, grammatical, correctly-spelled language
    We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
    So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
    Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
    More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

  • How to find the number of fetched lines from select statement

    Hi Experts,
    Can you tell me how to find the number of fetched lines from select statements..
    and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
    Thanks in advance
    santosh

    Hi,
    Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
    For ex:
    data: itab type mara occurs 0 with header line.
    Select * from mara into table itab.
    Write: Sy-tabix.
    This will give you the number of entries that has been selected.
    I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
    Hope this helps,
    Sudhi
    Message was edited by:
            Sudhindra Chandrashekar

  • How to find the number of occurance of a string in text field of Infopath form?

    Hi All,
    In Infopath text field, How to find the number of occurrence of a particular string in that field?
    Thanks in advance!

    You can check to see if it contains a string once by using the contains function, but there isn't a very clean way to do what you want. If you wanted to guess at the maximum number of occurrences, then you could:
    Box A has your initial. Set Box B to do a concat of string-before and string-after of Box A where it copies Box A minus the string we're looking for. Then we have Box C that does the same thing to Box B. Repeat as many times as you see necessary.
    Example:
    String: "1"
    Box A - "123451234512345"
    Box B - "23451234512345"
    Box C - "2345234512345"
    Box D - "234523452345"
    etc.
    We then have a field that has nested ifs looking backwards from Z -> A looking for a non-blank. Based on that, we return the number of occurrences. Again, this isn't clean, but it will work if you think there's a predefinable maximum.
    Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

  • How to find the number of users  connected to database from OS level(Linux)

    Hi All,
    Could anyone know , how to find the number of users connected to database without connecting with sql*plus
    is there any command to find it?
    example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
    oracle version:- 10g,11g
    Operating System:- OEL4/OEL5/AIX/Solaris
    any help will be appreciated.
    Thanks in advance.
    Thank you.
    Regards,
    Rajesh.

    Excellent.
    Tested, works as long as you set the ORACLE_SID first ( to change databases )
    ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
    Thanks!
    select OSUSER
        from V$SESSION
    where AUDSID = SYS_CONTEXT('userenv','sessionid')
        and rownum=1;Best Regards
    mseberg

  • How to find the number simultaneous call at a given moment on UCCX ?

    Hello,
    I would to know how to find the number simultaneous call at a given moment on UCCX ?
    it's on UCCX or UCCX RTMT, I don't know thanks a lot for your help.
    Aubert

    Hi Gergely,
    I should made a report on the number simultaneous call at a given moment on UCC on the server (all calls on the server)..

  • How to Find the number of Databases in a server.

    HI,
    Please tell me how to find the number of Databases are in a server . when the DB is not up.
    ps -ef | grep ora_
    This i know whether our DB is up or not. But i want to know how many databases are in a server .If the database is down .
    Cheers,
    Gobi.

    Hi,
    [oracle@oralinux admin]$ lsnrctl status
    LSNRCTL for Linux: Version 9.2.0.4.0 - Production on 01-DEC-2006 16:25:41
    Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
    TNS-01169: The listener has not recognized the password
    [oracle@oralinux admin]$
    Plz give me the solution.
    Cheers ,
    Gobi.

  • How to find the number of ODBC connections to Oracle Database

    Hi All,
    How to find the number of ODBC connections and all connections to the Database in last week. Are there any views to get this information?
    Thanks in advance,
    Mahi

    What Ed said is true that Oracle doesn't note which type of protocol is connecting to the database, however, you can see which program is accessing the database.
    For example: if you already know of a user using ODBC, you can verify as:
    select username, osuser, terminal, program from v$session where username = 'SCOTT'
    USERNAME                 OSUSER          TERMINAL   PROGRAM
    SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
    SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
    2 rows selected.Assuming that you can confirm the progam noted in the above (example) is the one using ODBC, then you can change the query such as:
    SQL> select username, osuser, terminal, program from v$session where program = 'w3wp.exe';
    USERNAME                 OSUSER          TERMINAL   PROGRAM
    SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
    SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
    2 rows selected.Just for kicks, I checked our listener.log file, but there was no reference of odbc in it either.
    Hope this helps...

Maybe you are looking for