How to find the Tcodes used by user

Hi
Can anybody help me to find out the way to check which t.codes or programmes one user had run till his last logon.
Regards
Manvir

Hi,
You can also find in st03n.
1. Open st03n --> expert mode
2. Double click on the period(today,week/month) to find the tcodes used by the user in that period.
3. Now expert dialog mode will be displayed in the left corner. Please select transaction profile
4. Double click on the same, you will find the all the results in right side dialog. click on find and enter user name.
5. Now again double click on the user. You can see all the transactions used by user.
Regards,
Gowrinadh

Similar Messages

How to find the list of all user exits modified by the users

How to find the list of all user exits using by in R3

Hi Mohamed
You use Solution Manager to do the comparison for you. There are some nice features that will highlight all your customised coding. Have a look at the SolMan resources on the Support Portal e.g. using SolMan for upgrade comparisons.
Rgards
Carl.

How to find the total no of users in a client

Hi Techie's,
How to find the total no. of users in the client ? is it possible ?
i have tried out with the steps by viewing the table USR01,but i can't get the actual solution ?
solutions rewarded!
regards,
S.Rajeshkumar

Hi rajesh,
You can use SU10, then click on "Authorization data" -> put * on user -> execute.. you should get a list of all users in the client with details included...
Also you can list them using USMM and check all licensed users....
Also SUIM -> users by complex selection criteria -> By user id -> put * on user -> execute.
Regards
Juan

How to find the maximum no of users logged in Database

Hi All,
How to find the maximum number of users logged in database at particular time? I can find currently logged users or umber of sessions running on Database but I wanted to find at what time maximum number of users or sessions connected to the DB? is that possible? if yes please help me. thanks.

Vijay wrote:
Hi All,
How to find the maximum number of users logged in database at particular time? I can find currently logged users or umber of sessions running on Database but I wanted to find at what time maximum number of users or sessions connected to the DB? is that possible? if yes please help me. thanks.
select * from v$resource_limit;Lists about 20 different resources with current, maximum and limit on usage. Session count is one of them. I don't think there's any (simple, efficient) way to determine the maximum number of different users of sessions, though.
Regards
Jonathan Lewis

How to find the records using contains with the word like this 'some text-some text'?

Hi,
How to find the records using the full text contains keyword and that column contains ‘some text-some text’
In the above some text can be anything.
Does anybody know please let me know.
Thanks,

Hello,
You can try to create a Full Text Index on the table and use CONTAINS() to get the record which contains the specify words.
For example:
SELECT * FROM TABLE WHERE CONTAINS(column_name, 'some text')
Reference:
Full-Text Search (SQL Server)
Creating Full Text Catalog and Full Text Search
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

How to find the TCODE that is created for the table maintanance generator

Hi ,
How to find the TCODE that is created for the table maintanance generator of particular table,if we only know the table name.
Regards
Ramakrishna L

Hello,
I try it this way
1. Goto SE16 --> enter table TSTCP.
2. In the selection-screen displayed, enter
PARAM = *<ZTABNAME>*
You will get the t-code for the TMG.
BR,
Suhas
PS: Are you sure a t-code has been created for this TMG ?

How to find the List of expired user Ids

How to find the List of expired user Ids

Can you please tell me the question in detail.What do u mean by expired users?
IN a Client or in a System.

How to find the tcode for the include's in user exit

Hi
I wanted to find the tcode for the given include name in the user exit.
Can you pls help in this regard
Regards
Madhan Doraikannan

Hello Madhan,
Usually the include in the user exit is part of a function group which directly may not fetch u tcode. So the best option is..
1. Get the FM name and check the table modsap. This will give u the enhancement name and related information which can help u with the tcode.
2. to use the where used option which will lead you though multiple program till u reach the main program where u can search for transaction.
e.g say u r trying to search include ZXM06U41 which exists in the FM EXIT_SAPMM06E_016. Now if u do a where used for this FM it will show program name MM06EF0C_CUSTSCR1_ITEM_SET_D03 if u again go for where used it will show u MM06EF0C. now if u click of the Display object list in the toolbar u will get the list of tcodes also.

How to find the Transactions using vendor number ranges

Hi All,
How can we find out the employee vendor transactional data ?
and what are the Tcodes used to find it?
Are there any finance transactions which allow vendor number?
Advance,
Thnks

Hello Gayatry,
1. Goto ST03. Select choose for analysis. Choose only one application server at a time in case you have mutiple application servers. Choose time period of your choice.
2. In the next screen from menu choose GOTOPROFILESUSER PROFILES. Here you will get the list on users who have worked on that application server.
3. Double click on the required user and you will get all the transactions he/she has executed.
4. In case you select TOTAL in step 1 and then follow the steps 2 and 3 you will only get the list of application server on which the user has worked and not the transaction details.
Regards.
Ruchit.

How to find the grants given to user for package/procedure?

Hi all,
how to find the grants in oracle for what all are the grants a user is having for package and procedure?
Thanks & Regards,
M.Murali..

M. Murali
Questions like this are asked over and over again on numerous sites on the Internet, including this forum, and answered.
You are aware this forum has a 'Search Forum' button?
PLEASE USE IT and STOP asking FAQ and DOC questions!!!!!!!!!!!!!!!!!!!
Sybrand Bakker
Senior Oracle DBA
Experts: those who did read the documentation

How to find the configuration use the Z message class.

Usually when I do some configuration, it may need to create some message. such as the Validation.
It raise a message when I run some standard t-code. So when I check some Z message class to find what program use this message, i can not find anything. So I assume there might two situation:
1、we can not trace it dome when the program didn't write like this way:    MESSAGE E003(ZFI).
2、this message might be used in some configuration,not in program.
so how do we find the configuration use this message? or Is there any way can trace all message ?
Thank you so much for your sincere answer.

Hi,
Case 1: Message is defined correctly with message number & message class.
     Example - Message E003(ZFI).
Easy to locate the message using whereused list.
Case 2 :
There are some FM's like BALW_BAPIRETURN_GET where we pass the message details.
For example :
call function 'BALW_BAPIRETURN_GET'
        exporting
             type       = p_message-msgty
             cl         = p_message-msgid
             number     = p_message-msgno
             par1       = p_message-msgv1
             par2       = p_message-msgv2
             par3       = p_message-msgv3
             par4       = p_message-msgv4
*          LOG_NO     = ' '
*          LOG_MSG_NO = ' '
        importing
             bapireturn = p_return
        exceptions
             others     = 1.
In these case, we won't be able to track the message number from where used list. So, what we do is before calling these FM we use the below statement,
IF 1 = 2. message e003(zfi). ENDIF.
    so that message can be tracked using where used list.
Case 3: Some messages can be configured in message control.( Table T100S ) . For those
messages we search for table T100S in the program.
Regards,
DPM

How to find the transactions used by a user

Hi experts,
How can I find which transactions used by a user. In which SAP table could I look after?

Hi ,
You can use transaction code ST03N.
1. Go to tx code - ST03N
2. Under "Workload" you can select your "Instance or Total" so that it expands and shows you Days, Week, Month.
3. If you want to look at the transactions executed for a particular day, lets say, then double click on any day.
4. At the bottom left you get "Analysis Views"
5. Select & expand "User and Settlement Statistics"
6. Double click on "User Profile"
7. On the right side of the window you get a list of all the users
8. Double click on a particular user you want to view the details of.
9. The new screen will display the "Transactions/Reports Utilized by User XXX"
If you wanna track which users executed a particular transacation then follow this:
10. In "Analysis Views" expand "Transaction Profile"
11. Double click on "Standard"
You can view the list of Transactions and Reports.
12. Double click on the Tx Code or Report you wanna check and it will show the Use of it.
This will help you.
Reward if helpful.
Thankyou,
Regards.

How to find out Tcode Used and their hit rate over a given period of time.

Hi All,
We wanted to know what are the tcodes that are used and how many times over a period of time..
Can you please suggest the ways to find this out..
I have heard of ST03N but not sure how to use this and then download the information ..
Regards,
Vidya..

Hi,
Check this
[How to get list of frequently used TCodes]

How to find the memory used by specific session in oracle

Hi,
Would require your help to find memory used by specific session/connection in oracle using any query.
**Regards**
**Vijay Salian**

Hi Girish,
which column we have to look at the at in the below ouptut to find the actual memory used by oracle session in our case as mentioned dedicated in ourcase????
SID Oracle User O/S User Session Program Machine PGA Memory PGA Memory Max UGA Memory UGA Memory MAX
3 oracle oracle@alex (LGWR) alex 5,526,516 5,526,516 77,956 77,956
9 oracle oracle@alex (ARC0) alex 4,500,080 4,500,080 77,956 77,956
10 oracle oracle@alex (ARC1) alex 4,500,080 4,500,080 77,956 77,956
11 SYSTEM oracle sqlplus@alex (TNS alex 3,403,988 4,780,244 77,956 1,400,476
2 oracle oracle@alex (DBW0) alex 2,488,624 2,488,624 77,956 77,956
4 oracle oracle@alex (CKPT) alex 1,359,484 1,359,484 77,956 77,956
17 SCOTT oracle sqlplus@alex (TNS alex 577,512 708,584 339,812 339,812
5 oracle oracle@alex (SMON) alex 499,704 499,704 77,956 77,956
8 oracle oracle@alex (QMN0) alex 475,596 541,132 274,348 274,348
19 SCOTT oracle sqlplus@alex (TNS alex 454,964 454,964 143,420 143,420
6 oracle oracle@alex (RECO) alex 237,024 237,024 77,956 77,956
1 oracle oracle@alex (PMON) alex 228,512 228,512 77,956 77,956
7 oracle oracle@alex (CJQ0) alex 228,512 228,512 77,956 77,956
13 rows selected.
Regards
Vijay

How to find the tcode for relation between tables

Hi all
Just wanted to know the tcode that will show/give graphycal/ nongraphycal relation between tables if there is any..
Very urgent, please.

Transaction code to find relation between tables(Very urgent.)
Please do NOT open duplicate posts.
Regards,
Ravi
Note - Please mark the helpful answers

How to find the Tcodes used by user

Similar Messages

Maybe you are looking for