How to find the TDS vendor details

Hi gurus
Where i get the TDS details about vendor? on which vendor how much TDS is charged? how could i find on which vendor the TDS is charged?
Please help me to workout this issue.
Warm Regards,
Dhananjay R

Hi Dhananjay,
Where i get the TDS details about vendor?
It is found in vendor master and in table LFBW-Vendor master record (withholding tax types
On which vendor how much TDS is charged?
This is seen in the master data (Fk03 or Xk03) in the withholding tax tab
How could i find on which vendor the TDS is charged?
C the TDS Gl accounts or c with_item table
Regards,
Kiran

Similar Messages

How to find the last login details of a Sharepoint SSRS user

How to /where to find the last login details of SSRS sharepoint user. Is there any table where we can check the last login details of user. This is because we are facing an issue of Subscription failure due to Sharepoint token expiration. If user logs in
before 24 hours of his last login time, he is able to get his report subscription. If not, below error is thrown.
The permission granted to user 'domainname\username' are insufficient to perform this operation.

Hi,
According to your post, my understanding is that you want to monitor the last login user’s details.
There is no out of the box way to achieve it in SharePoint.
We can use cookie to be a flag for checking whether there is an user just log in. After the page loaded, if the cookie is null, it suggests that there is an user just log in our site, then we
can get this user’s information using JavaScript Object Model and add the information into a custom list. With this list, we can monitor user’s login details.
Refer to the following link:
https://social.technet.microsoft.com/Forums/en-US/0cd4d531-cb61-4d90-aa70-413267f4a735/how-to-know-login-and-logout-details-of-a-user-in-sharepoint-online-2013?forum=sharepointdevelopment
Besides, here are two similar posts for your reference:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/1a35283e-0f2a-49b8-b330-801a3cfcd890/programatically-get-all-current-logged-in-users-list-for-a-sharepoint-site?forum=sharepointdevelopmentprevious
https://social.technet.microsoft.com/Forums/en-US/10953be3-cb1c-40c7-9454-545c8338b551/how-to-know-login-users-count-and-their-details-in-sharepoint-2010-web-application?forum=sharepointgeneralprevious
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

How to find the Last logon detail of a deleted user?

I need to find the last logon detail of a deleted user.I have tried with SM20 i got the details,but i coildnt get for few users.Is there any other way to get this?

Hi Eva,
Follow below:-
1. Go to Se16
2. table name either USH02 or USH04
3. provide BNAME row as your user name then execute it
4. you will get all the entries for that user in the next output screen
5. Check the Column names like
MODDA
MODTI
MODBE
TCODE REPID
For the Details which you need.
The descriptions of this columns are as below:-
MANDT
Client
BNAME
User
MODDA
Modification date
MODTI
Modification time
MODBE
Changed by
TCODE
Not More Closely Defined Area, Pos
REPID
Program Name
BCODE
Initial password
GLTGV
Valid from
GLTGB
Valid through
USTYP
User Type
CLASS
User group
UFLAG
User Lock Status
ACCNT
Account number
PASSCODE
Password Hash Val.(SAH1, 160 Bit)
CODVN
Password Code Vers.
PWDINITIAL
Indicator: Password Is Initial
Let me know if you need further help in this.
Regards,
Ram

How to find the job details?

Hi,
Can any one pls tell me how to find the job details.
Im getting the following error.
ORA-12012: error on auto execute of job 2523287
ORA-01031: insufficient privileges
but, when im connecting as sysdba adn do following it was showinfg no rows selected.
SQL> select * from dba_jobs where job=2523287;
no rows selected
SQL> select * from all_jobs where job=2523287;
no rows selected
How to find the job details of the job 2523287?
Thanks in advance.
Jishnu

yeah, trc file is there
I found the following info in that
*** ACTION NAME:(EDX_PURGE) 2009-11-08 22:00:00.411
*** MODULE NAME:(DBMS_SCHEDULER) 2009-11-08 22:00:00.411
*** SERVICE NAME:(SYS$USERS) 2009-11-08 22:00:00.411
*** SESSION ID:(683.4258) 2009-11-08 22:00:00.411
*** 2009-11-08 22:00:00.411
ORA-12012: error on auto execute of job 2523287
ORA-01031: insufficient privileges

How do we find the previous error details in the monitor (details tab).

Hi Experts,
While loading data to a target via PSA we got an error (ex. data error), we edited in PSA and reloaded to target from PSA successfully.
Here my problem is how do we find the previous error details in the monitor (details tab).
Kindly post your comments on this......
Thanks in advance.......
Regards,
Sankar Reddy

Hi,
While updating any request from PSA, you have to delete the first erroneous request from data target and then update the PSA request. If you do not delete the erroneous request, it will not allow you to update the PSA request.
Regards,
Yogesh

How to find the TAB details in the program - Urjent

Hi All,
There is a customized tab with details in a screen. How to see the customized tab details in the program. When I go and see in the status and program name, there are many includes written over there.
I just want to go and see the details in the tab of the screen in the program. Please let me know how to see the TAB details in the program.
Thanks,
Ramana

hi KCR,
You have to place cursor on that tab and then you have to go to Status...There you can see the program name as well as screen number... You can go for screen number there you can see the flow logic and then you can confirm the screen after going in the layout......
Just try and see.. and let me know..whether it works or not....
rewards points if it helpful...
Cheers,
Sagun Desai....

How to find the number of records in ods?

how to find the number of records in ods?
Pls suggest the solution apart going to the table of ods and seeing the number of records.
Is there any program or function module to see the number of records in ods?
For eg: SAP_INFOCUBE_DESIGNS is a program which gives the detail (number of records) of infocube.

Hi,
I was looking at this and found the following tables that may be of help.
One of these tables will include a summary of the record count of all the tables in your system based on the last time each table had it's database statistics calculated:
DBSTATTADA
DBSTATTDB2
DBSTATTDB4
DBSTATTDB6
DBSTATTINF
DBSTATTMSS
DBSTATTORA
We run on an Oracle database so the table record counts can be taken from DBSTATTORA. Type in AZ in table selection field in SE16 to restrict the output to ODS (or DSO) tables only.
The record count is at the time indicated in the timestamp field. Obviously this is not real time but should not be too out of date - if it is you may be having performance issues and should get your DBA / Basis to run a full refresh of DB stats.
Hope this helps, alhtough not real time the table should give you a decent indication of the size of all your ODS objects (or any other table for that matter!)

How to find the value of a variable in other program

How to find the value of a variable in other program say I am in a FM and this FM is being called in from other program and I want to know some of the variable details of the program from the FM itself. Imagine if this is a txn. and I need to know the details from some of the programs while executing the same transaction
Regards
Vin

Hi Vinayak,
 you will be having your first program values in internal table or some variables,
 when you are calling the second program you wii use like this,
 SUBMIT <Second Program Name> USING SELECTION-SCREEN '1000'
 WITH s_emp(second program select-options) IN t_emp(first program variables)
 WITH p_chk EQ t_chk
 WITH p_r1 EQ t_r1
 WITH p_month EQ t_month
 WITH s_cust1 IN t_cust1
 WITH p_r2 EQ t_r2
 WITH s_cust2 IN t_cust2
 WITH s_week IN t_week
 AND RETURN.
you have pas like this to get your first program details.

How to find the open PR in SAP

how to find the open PR list in SAP

HI,
Using T-code ME5A - List Display of Purchase Requisitions and give input data's are as follows.
Plant                : _______
Scope of List : ALV
Tick Mark of the below options :
       Assign Purchase Requisition to be tick
       "Partial Ordered" Requisitions to be tick
        Released Requisitions Only to be tick
        Requisition for overall Release to be tick
After that, execute the report shown only released and Open purchase requisition(PR) details.
Hope, it is useful for you.
Regards,
K.Rajendran

How to find the list of Queries/Reports which are using Exceptional Aggregation in SAP BI?

Hi All,
We are interested to know how to find the list of Queries/ Reports which are using Exceptional aggregation in SAP BI.
Please let us know is there any table's to check the list of reports using Exceptional Aggregation in SAP BI.

Hi,
Here you go..
1) Go to table RSZCALC and get list of ELTUID where AGGREXC is not INITIAL and AGGRCHA is not initial; now you get only exception aggregation set based on some chars. Also you can further add STEPNR = 1 since your intention is just to get query name , not the calculation details; this will reduce number of entries to lookup and save DB time for next steps.
Here you will get list of exception aggregation UUID numbers from which you can get properties from RSZELTDIR.
2) Pass list of RSZCALC-ELTUID to table RSZELTXREF - TELTUID and get list of RSZELTXREF -SELTUID - this table stores query to it's elements maping kind.
3) Now again pass RSZELTXREF - SELTUID into same table but into different field RSZELTZREF - TELTUID and get RSZELTXREF - SELTUID
This step you get query reference sheet or column or query general UUID for next step.
4) Pass list of RSZELTXREF - SELTUID into RSZELTDIR - ELTUID with DEFTP as 'REP'. Now you get list of query names in RSZELTDIR - MAPNAME and description in TXTLG.
Note: you can also get the reference chars used for exception aggregation from RSZCALC - AGGRCHA field.
Hope this helps.
Please keep in mind, it might take more time depends on how many query elements you have in the system...
Comments added for better DB performance by: Arun Thangaraj

How to find the user exit for order cancellation

I want to find the user exit for order cancellation. And also to ensure that no one amends the order once the canellation has taken place. The cancellation shall be deemed to be affected only if the vendor has confirmed the acknowledgement of the order cancellation.
I have got a Zreport where this order should not come as open order item.
Please tell me the method of finding the users exit for order cancellation and stop the order from getting modified. And also how to find the tables in which the data has to be updated that the order has to be cancelled.
In the PO header i want an additional tab <cancellation> by which the user by the help of userid and password should be able to cancel the order. An order once cancelled cannot be undone. A new order has to be placed. The new order can be placed refencing the cancelled purchased order.
My client has got a very stringent requirement. In the past cancelled order has been undone and caused lot of problems.
Regards.

hi
pls tell me t.code so that i will send all user exits related to that particular t.codes
Thanks & Regards
phaneendra

How to find the contents of proc from top command

I had a doubt related to how to find the contents of a procedure or the statements from the PID displayed in top command if it can be done from TOAD or
sqlplus. If we can find out the details from top like:-
21211 oracle 16 0 3228 1012 764 R 0 0.0 0:07.68 top
1 root 16 0 1732 552 472 S 0 0.0 0:01.29 init
say, what is the process with PID 21211 and 1 are doing?
I hope, my question is clear.
Please, help in solving the doubt.
regards

Join v$process, v$session, and v$sql
SQL> ed
Zapisano file afiedt.buf
1 SELECT p.pid, s.sid, s.serial#, sq.sql_text
2    FROM v$session s,
3      v$process p,
4      v$sql sq
5    WHERE s.paddr = p.addr
6*   AND sq.address = s.sql_address
SQL> /
       PID        SID    SERIAL# SQL_TEXT
        37        128          2 BEGIN EMD_NOTIFICATION.QUEUE_READY(:1, :
                                 2, :3); END;
        19        149       4566 SELECT p.pid, s.sid, s.serial#, sq.sql_t
                                 ext   FROM v$session s,     v$process p,
                                      v$sql sq   WHERE s.paddr = p.addr
                                  AND sq.address = s.sql_address
SQL>Edited by: Łukasz Mastalerz on Feb 12, 2009 1:27 PM

How to find the start condition of a ABAP program?

Hello Gurus!,
Could any one please explain how to find the start condition of a ABAP program?
like its a event based or time based?and also how to find that event and time..
Thanks in Advance...
Dinakar

Hi Dinkar,
Go to Job Schedule, put Job Step parameter as your program and see scheduled Job.
In Schedule Job double click to see start condition. and steps to see details and variant.
Hope it helps.
Thanks
CK

[InDesign CS3] how to find the reason of the memory leaks?

Hi all,
I'm working with InDesign CS3. I wrote a plug-in and loaded it into InDesign in debug mode. After I closed the application, I got a console window showing memory leaks as following:
Leaks! 52 leaks, 716804 bytes
Press any key to continue . . .
Does anybody know how to find the reason of the memory leaks? Thanks a lot!
Nicole

Thanks Dave. I'm using Windows, and I also tried MemoryTracker. I got a Leaks.txt which shows the detail of memory leaks as following. But I really can't understand it. Any help? Thanks. Leaks! 7 leaks, 455252 bytes 65036 bytes at: 7B22FF8 4172627C MemoryPool::GetNonPoolSizePeak cannot be found in any module! 00EDC1CB K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 01C9C74F cannot find address in any module! 01C96DEC BIBGetVersion cannot be found in any module! 01C96E60 BIBGetVersion cannot be found in any module! 01C979E4 cannot find address in any module! 0131F511 K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 0131F4C4 K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 00EDBC7E K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 00EDBFBE K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 00EDC558 K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 1002C26E cannot find address in any module! 1002BFB9 cannot find address in any module! 00401644 cannot find address in any module! 00405146 cannot find address in any module! 00404EBD cannot find address in any module! 7C817067 RegisterWaitForInputIdle cannot be found in any module! 65036 bytes at: 7B32E38 4172627C MemoryPool::GetNonPoolSizePeak cannot be found in any module! 00EDC1CB K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 01C9C74F cannot find address in any module! 01C96DEC BIBGetVersion cannot be found in any module! 01BB149B cannot find address in any module! 01BB4C62 cannot find address in any module! 00EDBCE3 K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 00EDBFBE K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 00EDC558 K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 1002C26E cannot find address in any module! 1002BFB9 cannot find address in any module! 00401644 cannot find address in any module! 00405146 cannot find address in any module! 00404EBD cannot find address in any module! 7C817067 RegisterWaitForInputIdle cannot be found in any module! 65036 bytes at: 7B52AB8 4172627C MemoryPool::GetNonPoolSizePeak cannot be found in any module! 00EDC1CB K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 01C9C74F cannot find address in any module! 01C96DEC BIBGetVersion cannot be found in any module! 02331A7A cannot find address in any module! 0236E7CD cannot find address in any module! 43726F6C cannot find address in any module! 65036 bytes at: 7C93D80 4172627C MemoryPool::GetNonPoolSizePeak cannot be found in any module! 00EDC1CB K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 01C9C74F cannot find address in any module! 02331F36 cannot find address in any module! 02367F85 cannot find address in any module! 02415DB4 cannot find address in any module! 3F800000 cannot find address in any module! 02416799 cannot find address in any module! FFFFFF11 cannot find address in any module! 65036 bytes at: 7CD6028 4172627C MemoryPool::GetNonPoolSizePeak cannot be found in any module! 00EDC1CB K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 01C9C74F cannot find address in any module! 01CE1C14 cannot find address in any module! 01DD9346 CTGetVersion cannot be found in any module! 01D9B052 CTGetVersion cannot be found in any module! 01D9B189 CTGetVersion cannot be found in any module! 01D9BB21 CTGetVersion cannot be found in any module! 01D9BD0C CTGetVersion cannot be found in any module! 01D9CE96 CTGetVersion cannot be found in any module! 01D9CEFF CTGetVersion cannot be found in any module! 01DDBEA2 CTGetVersion cannot be found in any module! 01DDC214 CTGetVersion cannot be found in any module! 01DDC7C6 CTGetVersion cannot be found in any module! 65036 bytes at: 16D68200 4172627C MemoryPool::GetNonPoolSizePeak cannot be found in any module! 00EDC1CB K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 01C9C74F cannot find address in any module! 01BB178C cannot find address in any module! 01BCE7C8 cannot find address in any module! 01BCEE13 cannot find address in any module! 01BD28C5 cannot find address in any module! 01BD4CB7 cannot find address in any module! 65036 bytes at: 20B68F88 4172627C MemoryPool::GetNonPoolSizePeak cannot be found in any module! 00EDC1CB K2Internals::K2VectorBase<HolderPtr<IPMUnknown>,K2Allocator<HolderPtr <IPMUnknown> > >::fill_insert cannot be found in any module! 01C9C74F cannot find address in any module! 01CE1C14 cannot find address in any module! 01D2F1A1 cannot find address in any module! 01D6F789 CTGetVersion cannot be found in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module! 07BFB464 cannot find address in any module!

How to find the avg salary of first 3 employees based on each department?

how to find the avg salary of first 3 employees based on each department?

Hi,
Do you mean something like this?
with a as
select
deptno
,sal
,row_number() over ( partition by deptno order by sal desc) rn
from
emp
select
deptno
,round(avg(sal)) avg_sal_of_top_3
from
a
where
rn <= 3
group by
deptno
order by
deptno
DEPTNO AVG_SAL_OF_TOP_3
 10 2917
 20 2992
 30 1983
If not please give more details.
Regards,
Peter

How to find the TDS vendor details

Similar Messages

Maybe you are looking for