How to find the toner level for HP LaserJet 1500L Drum and Toner set
You may have lost the original 1500L CD that came with the printer, or bought it second hand.
So how do you find out how much toner or drum fixer remains!
Actually this is a dumb question. The legacy 1500 and 1500L use dumb toner and drum cartages. They have a chip which simply counts the number of pages printed, and when a preset number (as per cartridge size) have been printed, it sends a signal to the printer to replace it. This is ok if you print the average amount of ink per page, but if you print a lot of photos, the cartage will be exhausted before the indicator flashes, and if like the rest of us you print the usual selection of documents etc, then probably about 50 to 25 percent of the toner remains - what a waste!.
Ok - but its kind of nice to know how many pages have been printed.
Do exactly the following:
1) Press the (green) GO and (orange) CANCEL button simultaneously.
This will then print a status and configuration page. The top left hand column will give the number of pages printed. However if you reset the NVRAM to allow you to use up the supplies, then this will be the count of pages printed since this was reset!.
Hello tmsmatt,
Please try the below step...
On the product control panel, press and hold the Resume button ( ) for 2 to 3 seconds.
The printer would print a configuration page and you'd find the info you required in it.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.
Similar Messages
-
How to find the print program for a sap script
Hey Experts,
How to find the print program for a sap script (espicially when it is a custom script(Z*))?
Thanks a ton,Thanx Vijay,
Actually when I searched for the program in both the tables it didnt show up ther.
But when I did check in the texts of script, I found it.
Good job.
Thanks all.
Vijay, a small doubt.
But why didn't it show up in those 2 tables when all the print programs for standard scripts show up usually?
thnx once again.
Message was edited by: dev a -
How to find the WhereUsed List for a Business Object Event?
How to find the WhereUsed List for a Business Object Event?
Can anybody let me know how to get which
Whereused function will get the data from
different Werks in multi-level?
Any sample program please!!! -
How to find the user exit for a screen..
Hi,
plz help me how to find the user exit for a screen..?
Regards
AnbuHi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name EQ enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object IN ('SMOD', 'SXSD')
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(105) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
SORT jtab BY object.
DATA : wf_txt(60) TYPE c,
wf_smod TYPE i ,
wf_badi TYPE i ,
wf_object2(30) TYPE c.
CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT jtab INTO wa_tadir.
AT FIRST.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Enhancement/ Business Add-in',
41 sy-vline ,
42 'Description',
105 sy-vline.
WRITE:/(105) sy-uline.
ENDAT.
CLEAR wf_txt.
AT NEW object.
IF wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
ELSEIF wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
ENDIF.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 sy-vline,
2 wf_object2,
105 sy-vline.
ENDAT.
CASE wa_tadir-object.
WHEN 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE modtext INTO wf_txt
FROM modsapt
WHERE sprsl = sy-langu
AND name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WHEN 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
SELECT SINGLE text INTO wf_txt
FROM sxs_attrt
WHERE sprsl = sy-langu
AND exit_name = wa_tadir-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
ENDCASE.
WRITE:/1 sy-vline,
2 wa_tadir-obj_name HOTSPOT ON,
41 sy-vline ,
42 wf_txt,
105 sy-vline.
AT END OF object.
WRITE : /(105) sy-uline.
ENDAT.
ENDLOOP.
WRITE:/(105) sy-uline.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
WHEN 'SMOD'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
WHEN 'SXSD'.
SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat. -
How to find the text id for the text in the sales order
Hi all,
How to find the text id for the item-text in the sales order?
There are different Text available in the sales order under item like Warehouse instruction, CSR instruction...
I want to know the corresponding Text id for the text ELECTRONIC ORDER COMMENT.
Table TTXID contains the validation of the Text id.
Please help me in knowing the way to identify the text-id from the text list..
Thanks foryour help
Suresh KumarU can fetch the texts for the items using
Read_text.
Example:
g_f_tdname = xvttp-vbeln.
g_f_obj = p_obj.
g_f_langu = 'DE'.
REFRESH g_t_lines.
CLEAR g_t_lines.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = p_var
language = g_f_langu
name = g_f_tdname
object = g_f_obj
TABLES
lines = g_t_lines
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards -
How to find the transaction code for the particular program or include
Dear All,
Please help me on this queary.
1) How to find what is the transaction assigned for the particular Report
2) How to find the particular include is used in which programs and also transaction codes
I have one ZProgram that contains only includes no selection screen, I have to find where this program is used, in that one include is ther I would like to know in which program and in which transaction that is used,
They have given ME9F, ME21N/22n, wheren this includle is calling.
Please kinely help on this.
Thanks and Regards,
MuralikrishnaHI
1. you can find the transaction for your report by opening in se80. On the left side window it will show the transaction if there is any.
2. to find in which programs particular inclue is called , just open include in se38 and press where used list icon. in the pop up window select programs.
regards
vijay
reward points if helpful -
How to find the workflow admins for all costcenters ?
Dear SRM gurus
We are using Classic scenario with N th step workflow with BADI.
we have a requirement.
How to find the workflow admins for the particular costcenters.
we used HRV1222A where ATTRIB EQ <Z attribute>(This is our own attribute to group all the costcenters)
used table HRP1001 to find the Admins but results are not correct because it is not showing my user id(I have all authorisations).
Is there anyway to find all the admins for a cost center(users are more than 7000+)
can anybody send work flow related presentations or cookbook
Thanks in Advance.
srinuhi
I have not received any thing.Please send again
[email protected]
[email protected] -
Where and how to find the storage locatation for the consignment stock
where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no - werks - batch
xxx sg11 - 200352ac
table : mchb
material no - werks -lgort - batch
xxx sg11 sg10 200352ac
xxx sg11 gs11 200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN -
How to find the search help for the parameters stmt in a report
hi
how to find the search help for the parameters stmt in a report , that is using which addition to the parameters statementI am not sure if I understood the question,but if you meant how to attach a search help to parameter for which a default search help is not available,you can do that by using addition "Matchcode Object"
Parameter: a type i matchcode object 'Search Help Name'
Search Help name should be in single quotes.
Regards,
Anubhav.
P.S: Award Points if useful. -
How to find the creation date for a released requests..
Hi friends ,
In se09 tcode , we a date which represents the last changed date .. Now , for a particular Released request i want to find out the Creation date for it . How can i find it . I checked the tables like E070create there also we have requests that not released yet , i have also checked se03 and other tcode and a fn mo dules like TR_READ_GLOBAL_INFO_OF_REQUEST .
So how to find the creation date for a released requests. Iam waiting for ur inputs..
Thanks in advance..hi,
Did u found the way to get the request creation date?
I also need the same information.
This needed for audit purpose........so it is must.
Please help me in this.
Best regards,
vinod -
How to find the supplying plant for a purchase order
Hi Guru,
My requirement is to dispaly the suppling plant and some other fields for the purchase orders using ALV report.
Could any one help me how to find the supplying palnt for a purchase order.
Suggest me any function module or with sample coding
Regards
PaulHi Ravi,
You are solution is right but in that table the supplying plant is not updated
Could you suggest me any other tables
Regards
Paul -
How to find the Commitment cost for a PM order using tables ?
Hello all ,
How to find the Commitment cost for a given PM order using table .
Thanks and regards ,
Prem.Issue got resolved
-
How to find the customer exits for a particular transaction
hi
how to find the customer exits for a particular transactionHi jyothsna vankadari ,
ther is a convenient way to find all BADIS called. You may know that BADIS are the newer version of EXITs.
I would suggest you to go for BADI.
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
Regards,
Clemens -
How to find the Invoice available for Purchase orders
Hi friends,
How to find the Invoice available for PO. Please give me the tcodes also.
Is one PO can have multiple Invoice, then what is the relation between those PO and Invoices.
Thanks,
Veerendra.Hi,
Goto ME23N and in the line item choose the PO History tab..
There you can check if there is any invoice created for that PO..
Yes one PO can have multiple invoices...
Check the table RSEG where it has references to a PO and PO line items..
THanks,
Naren -
How to find the standard Idoc for Transfer Order (LT03)
hi
How to find the standard Idoc for Transfer Order (LT03)
How to create the Idoc on LT03
plz help me out
Thank u
RamSomeone is using FM: L_IDOC_INPUT_WMTORD, message type WMTORD and basic type WMTOID01 in doing this when trying to send an Idoc to an external system when a transfer order for a delivery note is created (LT03). Is it OK
Please reward points
Maybe you are looking for
-
How to update multiple rows in ADF Tble
Hi, I have created a search form and ADF table. This ADF table is having column of Select Boolean check box along with actual table columns. When I click on Search button it should show the result in ADF table. I will be able to select the check box
-
Java web start and db connection problem
Hi I have an application that that connects to a db directly using jdbc . The problem i have is that when i start the app thru the web start it shows me this error java.sql.SQLException: Unable to connect to any hosts due to exception: java.security.
-
We are sending outbound EDI 850 documents using DB adaptor. The adaptor listens to a staging table to look for new POs (delete_flag = 'N' in staging table). The adaptors runs fine for some time eg yesterday it ran fine whole day (polling frequency is
-
After performing a routine software update this week, I am having problems with both of my email accounts. I am unable to "Reply" to any emails. Does anyone have a solution to this problem?
-
''locking as a dupe of https://support.mozilla.org/en-US/questions/941925'' I'm looking for a shortcut that allows me to open the Export window when saving Bookmarks, without having to go into the options.