How to find the User who changed the connection settings

Hi Gurus,
I am basically a BW guy but i am looking at your precious Guidance in this issue.
We have a situation in our BW production system. The job loads are working fine till now but seems like someone has meddled with RFC connection with R/3 prod.
The connection between R/3 and BW is broken. I would like to know if there is any way to find the User or some Log to find who might have medelled with the RFC's .
Help is greatly appreciated.
Regards
satish M

Hello Satish,
Which release are you on?
Option 1: Take a look in SM59 selecting the destination and there is a "last changed" information displayed.
Option 2: the table for these connections are often not logged for table change logging, but if they are... then try transaction SCU3 on the backend tables (table RFCDES is a good start).
(search for rec/client and recclient etc as search terms).
Option 3: Why would someone change a connection? Try to analyze what happened during the time period after the change, or even immediately before the change (audit logs, system events, server statistics etc). A simple check would be via SM20 to see who started SM59 immediately prior to this. A more complex check would be analyzing the RFC profiles in ST03N.
Option 4: On the R/3 side, you might be able to find the same auditable information as well (perhaps even the IP address of the caller?) Tip: The person might have created a dump... => transaction ST22.
Option 5: There are some other additional logging, tracing and control possibilities at a deeper technical level, if used or active at that point in time.
Cheers,
Julius

Similar Messages

Need log of the users who changed the partner profiles.

Hi,
Some user has been changed partner profiles of the CUA configuration Setup.
It is displaying only Agent Name. They delete the Inbound and outbound parameters of the partner profiles created by CUA. So, I need to trace out the user who changed these parameters.
It will be appreciate if anybody can help in this issue.
Thanks,
Shiva.

I resolved this issue by deleting the partner profiles created by CUA in all child clients. And delete the Distribution model in all child clients and re-distribute the distribution model from Master client.
Now its working fine.
But I am not able to trace out the user who changed partner profiles. I checked in ST03N but i didnt get the information abt the we20. ( I am using ECC 6.0 version).
And in WE20 it is not showing any User ID who changed the partner profiles. I checked in following tables but I didnt find any changed details of partner profiles.
EDIPHO
EDMSG
EDP12
EDP13
EDP21
EDPP1
T002T
T005T
Regards,
shiva.

Text in VA02 - how to find the user who added the text

Hi
The user is adding text in the sales order through VA02, sometime after creating the order. This is not making any changes to the existing data, but adding the text in Header Text.
When trying to findout who made the addition of text (not changes) from VA03 - menu - environment - changes ---it is not showing any details regarding this. Please guide me how to find out the user who made the addition of text in sales order through VA02.
Thanks,
Ravi

Hi Ravi,
          I think there is no option available to find the name of the person who added text to the sales order.
         If the person who creates sales order, should also maintains the text we can find the name who created sales order. I am sure that u might be knowing the way.
       Still for the benefit of friends who r not aware, in the sales order> GOTO>Header data--> Sales tab.
Regards,
Ravi Duggirala.

How to find the user who deleted the contents of DSO.

Dear friends,
Can u please tell me ,how to find the user who deleted the contents of the DSO.
The user has deleted the complete contents of the DSO. We need to find the user ,date and time.
regards,
Vijai

Hi,
If the user has used the manage option to delete the contents of the DSO then the changed by field will be updated by the users name. In case a program is used for the deletion then it wont be the case.
Regards
Govind.

How to find the user who approved the workitem.

Hi experts,
I have created a parking/posting workflow.
When the user Approves, parked document is posted and BKPF table is updated with WF-BATCH as user name.
Now I need to find the actual user who approved the workitem for posting.
My plan is:
1. Find the workitem id using the BOR, company code, document no, year, task no.
2. Find the user who processed the above obtained worktem id.
Please let me know the tables for the above points 1 and 2.
Or let me know if there is any other way to find the actual user.
Regards,
Karthik

Hi,
To get the workitem ID with respect to a specific business object instance make use of the FM SAP_WAPI_WORKITEMS_TO_OBJECT
To know who processed the determined workitem either you can make use of the FM SAP_WAPI_GET_WORKITEM_DETAIL or directly read the table SWWWIHEAD and you can find the actual agent WI_AAGENT this is the field which says who has executed the workitem.
Regards
Pavan

How to track the user who deleted the info object.

Dear Gurus,
In our BI system one info object has got deleted. If I need to track the user who has deleted that how can I track it(in which DBtable). And the complication is one user ID is being used by many people, in this case how can I track that from which machine the Info Object has been deleted(if there is any possibility to track the machines by IP address).
Kindly let me know if there is any procedure to find it out. Your help will be rewarded with a great honour.
Regards
Mohan Kumar

Hi dear,
you have to go in SLG1 transaction, and then select
Object: RSD
Subobject: IOBJ_DEL
External ID: (put here the name of your deleted IO)
Then choose a time range...and voilà, you can find the user who deleted the IO...
Hope it helps!
Bye,
Roberto
About the IP...look at USR41 table, but I think it's a bit difficult fo find data referred to the past...
If you haven't activated logon auditing in SM19...

How to identify the user who created the variant

Hi All,
Can anyone tell me how to identify the user who created the variant ?

Hi Dear,
For the same go to SE11 and view the table "VARID". This table give the details of the program,user,variant etc.
From this table u can know which user created the variant. Hope this solve your purpose.
Regards

How will I block/restrict the user to change the payment term in FBL5N?

Hi All,
How will I block/restrict the user to change the payment term in FBL5N????
I have tried on following objects:
F_BKPF_BLA
F_BKPF_BUK
F_BKPF_GSB
F_BKPF_KOA
F_IT_ALV
F_KNA1_BED
F_KNA1_BUK
F_LFA1_BUK
S_ALV_LAYO
But, not succeeded.
=>Actually user runs FBL5N, double click on a record then click on Change icon.
=>Change Payment Term.
Please reply ASAP. Point will be awarded.
With Best Regards
Dharmendra

Hi Dharmendra,
Please set an authorization trace in ST01 and then ask the user to execute the transaction and the steps on the same application server as the o ne on which the trace has been set (valid in case we are talking about mutiple application servers for same <SID>). After this is done switch off the trace,list it and fill all the authorization objects. That might give you the perfect idea.
Regards.
Ruchit.

How to disable other users from changing the status

Hi,
The status entry field can be changed irrespective of ownership in Documents.
I was able to change the status on the document created by other user.
Example: The status of document was In-Work. The document owner was X. But I was able to change it to Inspection Check.
How to disable other users from changing the status?
Regards,
Shashi

This is a frequently discussed topic.Please use the search feature.It has been discussed in [previous posts|CV01N: Filter documents by role; in various contexts.
Regards,
Pradeepkumar Haragoldavar

How to restrict the user to change the project structure but not the documents?

Hi,
I have created one project assigning different users in Solution manger. I want to risitrict some of the users to change the project structure but simultaneously allwoing the project documents to be created, edited or deleted using solar01 under Project documentation tab. For that I have followed the steps provided in the follwoing link.
http://wiki.scn.sap.com/wiki/display/SM/Howto+Restrict+Changes+to+Project+Nodes+to+Assigned+Team+Members
I am able to restrict the users to change the project structure, but I am not able to allow access to the project documents. It gives me the message "You are not authorised to change the project". This fulfills my one of the requirements. But, Is there any way to restrict the user to change the project structure but not the documents?. Any help will be apperitiated.
Thanks,
Rutvik Uapdhyay.

Hi Rutvik,
Basically there are 2 different authorization role ...you should look for and customize as per requirement in Z* namespace.
role - SAP_SOLAR01_ALL
this take care of objects in Solar01 like tab access etc
role -SAP_SOL_KW_ALL
this takes care of entire documentation within solman
hope this helps
Regards
Prakhar

How to find a user who created message in satelite system ?

hi all,
Does anybody know how to find a user who created message in satelite system, but when there is no business partner created for him in Solman ? In tx crm_dno_monitro, crmd_order or dnotifwl there isn`t any information. Is there any Tx or something where i can check it ?
Regards,
M.

Hi,
BP should ne maintained for the user in satellite system as a identification in solman system.
how you are trying to create a message in satellite system..
if you are using help-> create support message then, you can get the message log details on the table BCOS_PROT.
please update us
Thanks,
Jansi
Edited by: shivjansi on Jan 25, 2012 7:44 PM

Send mail to the user who logged the issue

Hi,
As it is currently the mail goes to the key user, which is a business partner. That is an organization. However several users are maintained under a business partner.
So now the mail goes to all these users at a status change. However can we only have the user who logged the issue getting the mail. Can you please advice me on how to get this?
Thanks loads.
Keshi

Hi.. Thanks for all ur replies..
Yes we hv assigned the key user as a business partner which is an organization,, This is also and requirement,
But since the mail is activated as to the key user it goes to all the users in that group, under teh business partner.
But when configuring this came across the Partner, in which we selected it as key user. But there were also other partners as Creator,Reported by etc..
I tried using both these but again it didnt work. Can anyone suggest anything?
Yes, when u assign the key user as a business partner and assign several users to it you can send multiple mails to users
Any help on this is very much appreciated,.,
Thanks all for replying once again.
Keshi

Is there a way the user can change the equation in the formular node from the front panel on the fly, dynamically?

Is there a way the user can change the equation in the formular node from the front panel on the fly, dynamically?

Sorry, I don't think so. That would be pretty cool if you could create a property node for a formula node and then enter a formula on the front panel and use it to update the formula. But you can't create a property node for a formula node and the only way of modifying the formula is by typing it into the formula node on the diagram. And you can't modify a diagram of a running VI.
You could create a VI which is only a formula node with the maximum number of inputs and outputs you expect. Have a button on the calling VI to Edit Formula. When the button is pressed, use a VI server to display the front panel on the formula VI, display a dialog box telling the user how to display the diagram of the formula VI, then stop the calling VI. (You can't edit a sub-VI while t
he calling VI is running). The user will then need to rerun the calling VI to use the new formula.
You might be able to do something by calling MatLab or something like that to get an interactive formula window.

Kick out the users who locking the files

hi, all:
I have a boring problem. but i am not sure the netware6.5 can done or not.
that's how to delegate the common user to kick out the users who locking the
files? by remote manage or other ways. I very appreciate for your answer.

Cyber-Rey,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Hi All,i am currently working on a flex application that will allow the user to change the language

Hi All,i am currently working on a flex application that will allow the user to change the language within the application from english to Japanese and vice versa. And everything works fine.
I am using flex 4.5
We allow the user to save records with english or japanese texts.
problem
When the user manually enters Japanese text and tries to save it the record defaults back to the default name (which is in english). But if you copy the entered text and paste it and then save it.It works fine.
Any idea , why this is happening?
Please let me know if the question is not clear.
Looks like there was already a bug
https://issues.apache.org/jira/browse/FLEX-28894?page=com.atlassian.jira.plugin.system.iss uetabpanels:all-tabpanel
Not sure why does it say , Resolved .
-KB
Message was edited by: bKartik.b

By Payal integration , you mean paypal button html ? or payment gateway setup etc ? If its a gateway configuration for your site domain then single page for all layout will work , but if you are using button code for all renditions then you would need to create separate pages for all.
Thanks,
Sanjit

How to find the User who changed the connection settings

Similar Messages

Maybe you are looking for