How to find this OSS note ?

Hi,
i have an issue in Tcode MR8M and i find the OSS note N° 182625 that propose a solution for it, but this solution concern previous releases (4.0B and 4.5B).
our release is 5.0 so is it possible to excute this note in our system and what is the impact of that ?
How to find the note concerning my release ?
Please advise
Regards.

Hi,
It's not possible to implement the note which refers to previous version of SAP; the system will reject this update. You can look for OSS by entering the error message number you are receiving and trying to see if there is relevant info.
Regards,
Eli

Similar Messages

  • Not able to find proper OSS note for an issue araised in patching

    Hi All,
    Our client is having ECC 6.0 system and recently done patching. there is an error occuring after patching in a standard program.
    How to find the OSS note available if any for the same? i am searching in service market place with search term as the syntax error what I am getting while activating the program but didn't find any useful information.
    please help me in this regard.

    Hi
    I have searched on the description of the systax error I am getting, but not found any clue.
    Please find below the program anme and description of the error message I am getting. It looks like the problem is with a standard class corresponding to it.
    Program Name:  RFFOGB_T
    Syntax error:
    Method "WRITE_LOG_ENTRY" is not declared or inherited in class "CL_SWF_WFM_PARALLEL_SECTION".
    Your inputs are very much helpful.

  • I cant find my purchased ringtones on my itunes account? Anybody know how to find this? It's not popping up under Music in my purchased history. It is soooo frustrating because they make it so hard to find anything ringtone related on the itunes store!!!

    I cant find my purchased ringtones on my itunes account? Anybody know how to find this? It's not popping up under Music in my purchased history. It is soooo frustrating because they make it so hard to find anything ringtone related on the itunes store!!!

    They will be wherever you put them.
    You only get one download.

  • How to find key figures not created in a Structure.

    After using Where Used on a selection variable Z_FISCPER3_M_SV a list of Key Figures appear. I wish to amended these Key Figures as the selection variable used is incorrect. However, I cannot find these Key Figures in the Structure?  Does anyone know how to find Key Figures not created in a Structure.

    Thanks for such a quick response.
    I am assuming the following about the table :
    -     Column u201CCALDAYu201D contains a date value for each day the Index is active.
    -     Column u201CBIA_USEDu201D contains a value that is iterated for the given day each time the Index is used.
    -     Column u201CBIA_NOTPOSSIBLEu201D contains a value representing how many times a query could not access this Index.
    -     Column u201CNO_BIAu201D tells if a BWA Index exists at all on any of my BWA Blades
    -     Column u201CBIA_TECHINAu201D ????????
    -     Column u201CBIA_INAu201D ???????
    -     Column u201CDB_FALLBACKu201D ???????
    I am not sure if my understanding of the column is correct.  Can you tell me they are?  The columns with u201C???????u201D mean I have no solid understanding of how to use these columns at all.
    Thanks

  • Help in finding an OSS notes for a SAP Program

    Hi,
    A runtime error TIME_OUT has occured in the program LSCD2F01.
    I need to find an OSS notes which deals with the correction of this dump.I have checked with the latest date of modification of this program and it is 18.02.2006
    So the OSS notes which has been generated earlier to this date has been implemented in the program.
    I have attached the Dump details below: Any inputs on this will be helpful.
    <b>Information on where terminated</b> 
      The termination occurred in the ABAP program "SAPLSCD1" in "READ_CD_FROM_DB".
        The main program was "SAPMSSY1 ".
        The termination occurred in line 1031 of the source code of the (Include)
         program "LSCD2F01"
        of the source code of program "LSCD2F01" (when calling the editor 10310).
    <b>Source Code Extract</b>
    1020 FORM read_cd_from_db CHANGING pt_cdhdr     TYPE cdhdr_tab
    1021                               pt_cdpos     TYPE cdpos_tab
    1022                               pt_cdpos_uid TYPE cdpos_uid_tab.
    1023
    1024   DATA: lt_cdhdr_for_uid TYPE cdhdr_tab
    1025        ,lv_guid_true     TYPE i.
    1026   FIELD-SYMBOLS: <fs_cdhdr> TYPE cdhdr.
    1027
    1028   CLEAR: lt_cdhdr_for_uid[], lv_guid_true.
    1029
    1030 * select header from cdhdr
    <b>>>>>   SELECT * FROM cdhdr INTO TABLE pt_cdhdr</b>
    1032            WHERE objectclas IN lt_sl_objectclas
    1033            AND   objectid   IN lt_sl_objectid
    1034            AND   changenr   IN lt_sl_changenr
    1035            AND   username   IN lt_sl_username
    1036            AND (
    1037                 (
    1038                   udate =  date_of_change
    1039                   AND
    1040                   utime >= time_of_change
    1041                  )
    1042                  OR
    1043                   udate >  date_of_change
    1044                 )
    Regards,
    Raj

    Check notes:
    459838 Performance improvement with very large datasets
    and
    671283 Performance problem with change documents material master
    Rob

  • How to remove obsolete oss note from SPAU List

    Dear All,
       How to remove obsolete oss note from SPAU List. Bocz it having yellow trafic Signal and  it is not allowing me to reset to orginal or adopt.
    Please tell me how to reolve this problem.

    Hi,
    Please mention the Netweaver release of your system.
    Next, if you mention the note is obsolete - the traffic light should be grey.
    If its yellow, that means semi-automatic adjustment needs to be made.
    If you click on the obsolete greyed out note, you get a message saying the note correction was delivered with upgrade or support package and it could be reset.
    If you click on the yellow note, the system would try to reapply the note via SNOTE.
    Please try either or the above and let us know the system response.
    Regards,
    Srikishan

  • How can we apply OSS notes in BW or BI.

    Dear Friends , how are you all.
    Could anyone please tell the process about How can we apply OSS notes in BW or BI.
    What is the difference between LO extractors and FI extractors.
    It would be helpful to me.
    Thanks in Advance,
    Kalyan

    Hi,
    Using T Code SNOTE we can apply the OSS notes.
    Also
    OSS is Online support system runs by SAP to support the customers.
    You can access this by entering OSS1 transaction or visit Service.SAP.Com and access it by providing the user name and password.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fe8dbb80-0c01-0010-fe84-b76d0d07db34
    SAP Notes
    IN BW T.Code SNOTE, here you can see all the notes which has been applied.. also u can apply a new note in this T.Code.
    http://service.sap.com/notes
    Whenever there is a short dump, in section 'How to correct the error' keywords are given so that you can search relevant OSS
    Notes.
    Best way is to search with the Note Number if you know one. Else, you can search with restriction by giving proper version,
    application area, priority, release status etc along with keywords.
    Thanks,
    JituK

  • HT4061 Need to find MEID # on my ipad 2 (non-cellular) to use Verizon's wi-fi while on vacation.Can anyone explain to me how to find this number?   Thanks in advance .  Scott

    Need to find MEID # on my ipad 2 (non-cellular) to use Verizon's wi-fi while on vacation.Can anyone explain to me how to find this number?   Thanks in advance .  Scott

    iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
    http://support.apple.com/kb/HT4061
     Cheers, Tom

  • My iPod was stolen and insurance company want it's serial number before replacing it. They have advised iTunes stores this information as a device connected to iTunes. Can anyone advise how I find this information?

    IiPod serial number stored in iTunes, can anyone advise how I find this information for my insurance company?

    Juliebathgate wrote:
    IiPod serial number stored in iTunes, can anyone advise how I find this information for my insurance company?
    Hi,
    If you have made a backup at any time of your iPod in iTunes, it should be in Preferences, under Devices tab.
    In iTunes
    Open iTunes Preferences.
    From the Preferences window click on the Devices.
    Once you are there you should see a list under "Device Backups:".
    Hover your mouse pointer to the device and in a little while it should display the serial number of the device (with an iPhone it will also display a phone number used with it and the IMEI code and with an iPad it will display the IMEI in addition to the serial number).
    A pircture of where it can be found: http://km.support.apple.com/library/APPLE/APPLECARE_ALLGEOS/HT4946/en_US/HT4946- devices-iphone-001-en.png

  • TS3694 how to find this solution?

    how i find this solution in iphone 3g .. i need help to recover this.

    The first step in finding a solution is to state the problem.

  • How to find this link

    Library -> Logistics -> Logistics Execution (LE) -> Transport (LE-TRA) -> Shipment Cost Processing -> Shipment Cost Processing with Service Providers -> Shipment Costs as Delivery Costs).
    How to find this above link.
    Please help me?
    How to connect to sap library
    With regards
    lakki

    Hi Lakki,
    Please go through this link it will help you,
    http://help.sap.com/saphelp_47x200/helpdata/en/93/74413b546011d1a7020000e829fd11/frameset.htm
    I hope it will help you,
    Regards,
    Murali.

  • How to find this Search object relavant to which root object?

    Hi All,
      how to find this Search object relavant to which root object?
      As I am having search object 'BTQuery1O', so which is root object for this?
      how to find this?

    Hi Carl,
               Search object BTQuery1O and the attribute structure associated with it is CRMST_QUERY1O_BTIL,
               even if we enhance this structure with zfield, as it is search object, then it should queried on some main database
               table, so it is 'CRMD_ORDERADM_H', here we need to add our zfield first to it, so that after added to search object then
               only search query work, so that's the reason I am asking is it possible to find 'CRMD_ORDERADM_H' relevant from
               GENIL_MODEL_BROWSER, or any way also?

  • HT1551 Want to play tv shows purchased on iPad on Apple tv. When I touch icon for apple tv and choose "apple tv" it asks for an apple tv password. We have never set up any password and can't get past this screen. Does anyone know how to find this password

    Want to play tv shows purchased on iPad on Apple tv. When I touch icon for apple tv and choose "apple tv" it asks for an apple tv password. We have never set up any password and can't get past this screen. Does anyone know how to find this password?

    You can remove the Airplay password from the Settings menu on your AppleTV.

  • I need a domain key for the icrop app. Any ideas on how to find this?

    I need a domain key for the icrop app. Any ideas on how to find this?

    Can you open the Preview program without loading a file, like by itself?
    If it doesn't load then I suspect a corrupt Preview preference file.
    Deleting the System Preference or other .plist file
    Can you open other files with Preview, like jpg's and images?
    How about other PDFs? or is it just that one you have downloaded?
    Run through this list of fixes
    Step by Step to fix your Mac

  • HOW TO CREATE SAP OSS NOTES ID

    I am SAP FI certified and i have my certificate but i have only my SUID as written on certificate. now i want to create my OSS NOTES is , along with SUID i need to give password to create ID. please guide me how create oss id

    Hi,
    Login on sap market place then go to Data Administration------>User Data -
    >Request new users.Then give authorization to this user.
    Regards,
    Pankaj

Maybe you are looking for

  • Does anyone know how to creat the Pop Art effects of Warhol in PSE 11 ?

    I believe it was PSE 9 or 10 and I took one B&W graphic and applied a plugin or filter and the result was four copies of the graphic in these wild Neon colors all in one frame ... Now I have misplaced the final work and am unable to recreate with PSE

  • How to Fix a font of the List in SAP INDOX

    Hi All,   I working on report where i need to send the document in txt file to the SAP Inbox for the User specified in the Selection Screen of the report. I used FM : SO_NEW_DOCUMENT_SEND_API1 which send a document in txt file. I am getting the docum

  • Key Mapping with Oracle Reports

    I am currently trying to run report requests using the Oracle Report Server however the problem that I have is that we need to send database username/password information over the network. From a security perspective this is not acceptable. One way w

  • Steps for replicating GR custom field values from EBP to SAP R/3

    Dear SRM Gurus, We wre using SRM 5.0 extended classic scenario.. We are having 3 custom fields for GR in SRM, we want to replicate these values to 3 other standard fields in SAP R/3.. Can you pls tell us the Procedure, Steps and standard objects that

  • Cannot connect to sqlplus

    I am getting the following error when trying to connect sqlplus as sys user. Can anyone explain how to resolve it. I just copied the oracle binaries from different server and restored here. After copied I run the relink command also. $ORACLE_HOME/bin