How to find user that reset encashment date for a check
How can I determine what user reset (removed) the encashment date (field BANCD in table PAYR) on a check?
Hi Will,
You can only do that if the change document flag is set on the the payr-bancd data element. Go to SE11 to see this. Most places don't have that flag set, so you chances are you won't be able to see who changed it.
Thanks,
Tammy
Similar Messages
-
How to find table that store real data for field 'BETRG' ?
1) datasource 0HR_PY_1 include field 'BETRG' in R/3 source system; extract structure HRMS_BIW_PY1 for datasource 0HR_PY_1, however structure is not used for stroing data. Question: how can we find table which store real data for the field 'BETRG'?
2) If I want to add one type call department leader type which already defined in one enhanced HR table, to calculate the total amount using field 'BETRG' according to department leader type. Should I enhance datasource 0HR_PY_1 by adding department leader type or create new view based on enhanced HR table and another table that include 'BETRG' data, also create new datasource based on this view later on?
Thanks!Hi,
Check this for Payroll Data (Transaction Data) 0HR_PY_1
http://help.sap.com/saphelp_nw70/helpdata/EN/a5/94e8288eec11d4b2fb00010220c65f/frameset.htm
The extractor for payroll results reads data from payroll cluster PCL2, not from standard tables.
thanks,
JituK -
How to find User Exits/ Enhancments/ BADI's for T-code CJ20N
Hi All,
In T-code CJ20N, assume there are two fields A & B. User will input value in A, based on A value I need to fill B field. So I need to find first suitable User Exit/ Enhancment/ BADI.
Kindly help me in this regard. Pls tell me how to find User Exit/ Enhancment/ BADI for a given t-code.
Regards
Jaker.Hi,
Check the following , this might help,
1. CNEX0037
2.CNEX0038
3.CNEX0039
Regards
Kiran Sure -
How to find users that who open/send the purchase requisition
Hi gurus,
I need to find all the users that open the purchase requisitions in the system. Is there a table where I can check or any other way?
Thank you.
HDear Hakan,
SM04 is just who is doing in perticular transaction in current time,but there is no display who is done in past time in perticular transaction, i mean what are the Changes have done.
the only solution in Purchase Requisition is available is Venrtion Management.if you activate and configure Vertion Management, werever people is changing PR before saving they must have the enter name or permition to take,so as your solution is best useful is Vertion Management is very much suitable
Vertion Management configuration is also pretty simple,so threads available,please have a look
Hope this may helps you
Prem. -
How to find table name which provide data for the DataSource
Hi friends,
How to find the Table name which providing data for the Business content DataSources (Master Data). Is there any table or Transation which give datasource and Table name at once.
Thanks&Regards
RevathiHi Revathi...........
1)If the datasource is extracting data from any table.................open the datasource using RSO2..........there u will get the table name......
2) If the datasource is extracting data from any view.............go to RSA2..........copy the view name..........go to SE11 >> give the view name >> and check..........
3) If Datasource is Function module based............then u hav to check in RSA2 >> give the datasource name >> execute >> there u will find the Extract structure name......Copy the Extract Structure name >> Go to SE11 >> in the Data Element field give the Extract structure name >> Display >> From the Entry Help/Check tab u can get the Table name............
If u double click on the Extractor..............u will get the Function Module..............from there also u can check that the FM extracting data from which tables............
For Other datasources also...........u can get the structure name from here........
4) If the Datasources r LO datasources............then u can get the table name in LBWE.............LO extractor - goto transaction LBWE.................... Select the maintenance link for your datasource............
here in the right hand pane.........in the drop down box, you can see the structures associated with this extractor ........ just remove the MC for the structure names to get the base table names. e.g. EKKO for MCEKKO.
5) There is a pattern for the Extract structure name for LO datasources.............for an example..........
DataSource 2LIS_11_VAITM ......Extract structure name is MC11VA0ITM
2LIS_11_VAHDR >> MC11VA0HDR
Hope this helps.........
Regards,
Debjani....... -
How to find user group from tcode
Hi Experts,
I have custom tcode from this i found report name as AQIDSYSTQV000001SD_RR_03======
I am unable to find Queryname in SQ01 from this.
When i saw some of the forums i understood that IDSYST is the user group for my query but i am unable to trace such user group in SQ01.
Please guide me how to find user group for my report
Thanks&Regards,
narasimha.Hi ,
I found in table AQGQSTRUC but i didnt find the specified query
Previously 401 client is there but at present it is not there .How can you justify it that it is 401 client.
As 401 client data is moved to someother client is it the problem why i am not able to find query??
Thanks&Regards,
narasimha.
Edited by: narasimha02 on Dec 7, 2010 9:54 AM -
How to find user who loaded the procs in DB
Hi guys how to find user who loaded procs in database ..and the date...
is there anyway..
i tried to look at all_objects..but it didnot workout..
thanksThat is correct. You will only have audit rows for item that you are auditing. I am suggesting you audit all DDL in a production database since production jobs should not perform DDL with the probable exception of truncate. This will provide this type of information going forward. It will not help you answer the question of who created the procedure last week?
Auditing is explained in the Security manual and the full comand syntax is available in the SQL manual.
You can easily write a purge the audit data to remove data once it is no longer of interest based on the date the audit row was created.
HTH -- Mark D Powell -- -
How to find user exit implemented in the program
how to find user exit implemented in the program or standerd transaction
try this program to get the list of all the user exits for a transaction...
*& Report Z_USER_EXIT *
*REPORT Z_USER_EXIT .
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN. -
How to find user exit for a perticular screen?
Dear all,
Can some one tell me how to find user exit for a perticular screen?
ex: MC88 screen can we figure out are there any user exit for that screen!!
Regards,
VjUser exits are built into the Standard SAP code. You just activate them and insert your code into the include programs.
Here is a program that will list the user exits per transaction code. Not perfect, but it may help.
report z_find_user_exit no standard page heading.
tables: tstc, tadir, modsapt, modact,
trdir, tfdir, enlfdir, tstct.
data : jtab like tadir occurs 0 with header line.
data : hotspot(30).
parameters : p_tcode like tstc-tcode obligatory.
at line-selection.
get cursor field hotspot.
check hotspot(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
start-of-selection.
perform get_data.
perform write_list.
FORM get_data *
form get_data.
select single * from tstc
where tcode eq p_tcode.
check sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = tadir-devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
endform.
FORM write_list *
form write_list.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
endform.
SMOD, is where you can find the system modifications provided by SAP. CMOD is where you will implement them. If you are looking for all the enhancements provided, then go to CMOD, follow the menu, 'Utilities-->SAP Enhancements'. This will take you to a screen where if you just execute it, you will get all the enhancements provided by SAP.
It is always difficult to find a user exit if all you have is a program name or a transaction code, unless you do a program like Rich suggested. But even there, you will not be able to find user exits that are implemented as sub-routines(also called forms not sapscript forms). Most of the user exits are documented under the corresponding task under IMG structure. So use transaction code SPRO, go to the IMG structure, choose the application area that your program or transaction might be and then you should find a task that talks about enhancements. If you execute that task most often it will take you to CMOD and sometimes to SE38. But all you want to know is there in the documentation attached to the task. Then you can go to CMOD and see which components are there.
Regards,
Amey -
Hi experts,
how to find user exit in spro.
the path is in spro.
in spro->financial accounting>travel managment>travel expenses>transfer to accounting-->
define assigment of wage type to symbolic account.
when u click on this it will ask for trip provision variant if we key in the work area number thne we get a screen . in that wage test key start date end date so on... are there so in the field KEY its empty so i want to find a user exit.can u please help me in this.
regards,
sunita.Hi,
For more information on user exit,
use the following link.
Hope it is useful.
http://****************/Tutorials/ExitsBADIs/ExitsMain.htm
Regards,
Phani. -
font color="green" How to Find Users Tips (FAQs) on iChat /font
Hi,
Some of the more regular Visitors to this Forum may have noticed that above the Topic List is a "Recent Tips" area that has the most recently Updated Users Tips.
There more, (you may wonder where FAQ 1 is for example).
One way to find them is to use the Search feature just above your Profile and My Post an Setting Links in the box on the right.
Many of the Former FAQS and Users tips have had the Search tag kichat added to them.
Using this and changing the date option to All How to Find Users Tips (FAQs) on iChat">brings up 16 Links in this Example Search
One of the Level 4 Posters, Red Dwarf, once spent some time going through the whole of the Users Tips Library and posting them in to two formats.
This link is to the iChat section within his 'by Forum/application' listing.
There is another 'By Author' Version
The Whole Users Tips Library is here. IT has a header item that tells you who can post/Suggest new Contributions with a link to that additional forum.
I hope you find this useful.
10:06 PM Tuesday; April 14, 2009The Section above the topic List in this Forums contains Recent Users Tip section and ifo about Perian 1.1.3 has been added recently.
(In relation to this post's date)
8:54 PM Wednesday; May 6, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
How to find the table in which data from a structure sits
Hi,
I want to know how to find the exact table where data sitting in various structures during runtime are stored.
For instance,in ME23N we have various tabs and data in those are held in various structures. This we can see by checking the technical setting of each field.
I want to know in which table the data is actually stored for each field and how to find them.
Any other means other than using "WHERE USED" option?
Thanks
CMAfter checking for technical field from the screen, when you reach out to structure, you can dbl click on the particular field's data element. From this data-element you can get to know in which tables it is used. Also if the data element refers to some master data field then you can check out its domain and in the domain you can refer the<b> value table</b> for that domain. This is what i will do if i am not sure about anything.
Hope it will help a little.
Jignesh. -
How can I verify that my App data is actually stored in the iCloud. I can see and access my notebook, contacts etc. on the iCloud website, and I can see my photos in a folder on my Windows-based desktop compter (iCloud/Photostream). But no app data.
With Dropbox, I can actually see all of my stored files. With iCloud, it seems, I'm supposed to just trust that Apple has my back. Short of deliberately trashing my app data and then attempting a restore, is there no way to check the data?You can't access them on Windows (unless you have iCloud enabled Windows programs) and I don't think any are, yet.
iCloud data is accessed via Apps/Programs, the Windows programs vendors will have to step up (just to make it worse Microsoft have not yet enabled their Mac programs, such as Office yet) I doubt that iCloud access is much of a priority for them, complain to MS, when enough Windows users complain maybe they'll do something. -
How to find out that particular structure is used in which tables
Hello Friends,
Most of the times through techinal information we come to know the table name for a particular field.And in se16 when i give that table name than system says its structure and not the table.So in se11 when i give that structure name in database table field, its shows all the field in that structure, but not the data stored in that field.
So my question is how to find out that particular structure is used in which tables,so that i can view data stored in that structure?
Thanking you guys in advance.
Regards,
JitendraDear,
When you click on the technical information it will give the structure name and field, double click on the structure and it will take you the display structure screen, there you will have the where-used List icon (Ctrl + Shift + F3) at the top , click on that and it will show the options, select Database tables and execute, it will give the tables related to the structure, you can explore the list of tables and find where your required field is stored in them.
Thanks & Regards,
Vijaya Bhaskar A -
How to find out each Cell having Data or Not in Excel File by Using WDJ
Hi Friends,
I have one doubt on WDJ.
I have to Upload Excel File. Click on Upload Button in Excel file Data will move to One Bapi. This is I was done. But my Requirement is if any empty Cell in Excel That File not uploaded it display one error message Please upload Correct Excel File
How to find out each Cell having Data or Not in Excel File by Using WDJ. Please tell me.
By Using this Code I have Upload Excel File
InputStream text = null;
int temp = 0;
//wdComponentAPI.getMessageManager().reportSuccess("filePath Vijay:::");
try
File file = new File(wdContext.currentContextElement().getResource().getResourceName().toString());
FileOutputStream op = new FileOutputStream(file);
if (wdContext.currentContextElement().getResource()!= null)
text = wdContext.currentContextElement().getResource().read(false);
while((temp=text.read())!= -1)
op.write(temp);
op.flush();
op.close();
path = file.getAbsolutePath();
//wdComponentAPI.getMessageManager().reportSuccess("Path Name :::::"+path);
catch(Exception ex)
ex.printStackTrace();
But my Requirement is If excel having any Empty Cell that excel file not uploaded.How to do this...
Regards
Vijay KalluriHi my friend
I would like to share you some APACHE APi´s that i use when i have to read excel files in Web Dynpro.
JAR = poi-3.2-FINAL-20081019.jar
Some Example:
POIFSFileSystem fs;
HSSFWorkbook wb;
HSSFSheet sheet;
String myMexican_ValueFromExcelis = "";
try {
fs = new POIFSFileSystem(new FileInputStream();
// and select the cell "y"
cell = row.getCell( 0 );
myMexican_ValueFromExcelis = cell.getCellValue();
}cach(Exception e){
REgargds
Maybe you are looking for
-
Windows 7 - can't use ipod Touch
I recently installed Widnows 7 on my Pc and have not been able to use my touch with it since. When I first plugged my ipod touch in it was recognized as a camera. I had this issue with Vista when I first bought my touch. The fix I used back then did
-
i have backed my iTunes with over 10,000 songs on a hard drive and than i reset my computer to factory settings because my email was hacked, when i downloaded the music back to my macbook pro only 2030 were able to be downloaded . how can i download
-
With my Macbook Pro, is there any easy way I can share contact info for multiple contacts with individuals who use either macs or pcs?
-
How I can make the 9iAS rel.2 infrastructure highly available? I have two cluster servers for that infrastructure?
-
Folders show no media to be displayed
I am new to photoshop elements 12. I imported all my photos and was using editor when i went back into the organiser the photos wouldn't show only videos were showing. All folders are listed under my folders but when I click on them they say 'no m