How to find weather our cube has indexes or not.

Hi is there any table to findout weather any indexes has been created on CUBES,Infoobjects,ODS.If there is no table any easy method to find them manuallly??? Who ever answers this questions will be rewarded handsomely

Hi Steve,
there are somany ways to find this.go to inofcube right click and fo to performance tab and check whether the tick mark is there on create index then if its present you can confirm that batch indexes are present for this infocube.
Right click on that cube and select manage--> performance tab -->u can click on check option for index, if it turns red no index , u create index there only by selectin create index option.
other way is go to SE11 and give your fact table name like /BIC/F<INFOCUBE NAME>and display and there at the right most top you can find one option like indexes click on this you can see which indexes are using by the cube and its of which type.
hope its clear,
assign points if it helps..
Regards,
ashok
Message was edited by:
        ashok j

Similar Messages

  • Hai l how to find weather our infopackage is used in any infopackage group?

    hai is there any way to find out weather our infopackage is used in any infopackage group.Help is appreciated.
    Thanks,
    Mark.

    Hi Steve,
    go to RSMON Transaction there you can find all the infopackage groups and there you can check whether your infopackage is present there or not.
    and also if it is included in any infopackage group or any process chain you can find the option like "infopackage is included in the infopackage group or process chain" in the schedule tab.
    Hope its clear.
    assign points if its helpful....
    Regards,
    ashok

  • How to find the incremental growth of index for last few months

    Hi,
    How to find the incremental growth of index for last few months.
    Thanks,
    Sathis.

    Hi,
    Check the below link, it may help you!
    http://www.rampant-books.com/t_tracking_oracle_database_tables_growth.htm
    Thanks,
    Sankar

  • Where on the LWS can i find what our enterprise has downloaded?

    Where on the LWS can i find what our enterprise has downloaded?

    Hi Karlehem,
    If you are added as a Contact on LWS website then please login to LWS and click on Downloads. From the Download screen please select your Deploy to ID and then select Creative Cloud Pkgr from the Product name to download and create Adobe applications package.
    You can also refer to this link to use Creative Cloud Packager
    http://helpx.adobe.com/creative-cloud/packager.html
    Please let us know if it helps.
    Regards,
    Abhijit

  • How to find out each Cell having Data or Not in Excel File by Using WDJ

    Hi Friends,
    I have one doubt on WDJ.
    I have to Upload Excel File. Click on Upload Button in Excel file Data will move to One Bapi. This is I was done. But my Requirement is if any empty Cell in Excel That File not uploaded it display one error message Please upload Correct Excel File
    How to find out each Cell having Data or Not in Excel File by Using WDJ. Please tell me.
    By Using this Code I have Upload Excel File
    InputStream text = null;
         int temp = 0;
         //wdComponentAPI.getMessageManager().reportSuccess("filePath Vijay:::");
         try
                   File file = new File(wdContext.currentContextElement().getResource().getResourceName().toString());     
    FileOutputStream op = new FileOutputStream(file);
                   if (wdContext.currentContextElement().getResource()!= null)
                          text = wdContext.currentContextElement().getResource().read(false);
                             while((temp=text.read())!= -1)
                                  op.write(temp);
                                  op.flush();
                                  op.close();
                                  path = file.getAbsolutePath();
                                  //wdComponentAPI.getMessageManager().reportSuccess("Path Name :::::"+path);
         catch(Exception ex)               
                   ex.printStackTrace();
    But my Requirement is If excel having any Empty Cell that excel file not uploaded.How to do this...
    Regards
    Vijay Kalluri

    Hi my friend
    I would like to share you some APACHE APi´s that i use when i have to read excel files in Web Dynpro.
    JAR = poi-3.2-FINAL-20081019.jar
    Some Example:
    POIFSFileSystem fs;
    HSSFWorkbook wb;
    HSSFSheet sheet;
    String myMexican_ValueFromExcelis = "";
    try {
             fs = new POIFSFileSystem(new FileInputStream();
             // and select the cell "y"
            cell = row.getCell( 0 );
            myMexican_ValueFromExcelis = cell.getCellValue();  
    }cach(Exception e){
    REgargds

  • HOw to check weather flash player is installed or not in Nokia ?

    How to check weather flash player is installed or not in
    Nokia ? I had created some flash file , i need to install in Nokia
    mobile .If there is no flash player how it will detect? if it is
    installed then how it will detect.
    Chirag

    Did you see the list of supported devices?
    http://www.adobe.com/devnet/devices/nokia.html
    http://www.adobe.com/devnet/devices/nokia_s60.html
    http://www.adobe.com/devnet/devices/nokia_s40.html
    http://www.adobe.com/mobile/supported_devices/

  • How to find whether remote database is up or not (connected via dblink)

    Hi,
    I am using dblink to connect Biz database from Dev database.(Biz, Dev - database names)
    Running dbms job using the dblink from the Dev database to update data on Biz database...
    Problem is dbms job should run if and only if the Biz database is up for which i created the dblink...
    1) How to make sure or implement the check to find whether the Biz is database is up or not in Pl/sql or sql...
    2) How to reschedule the dbms jobs once the database is up
    pls suggest me how to find whether the database is up or not b4 running the dbms job?
    Using- Oracle 10g

    The only way to know whether the remote database is up (and whether the network between the two databases is up and whether the remote database's listener is up and whether the password configured in the database link is correct and whether the local TNS alias is correct, etc) would be to actually run a query against the remote database over the database link. In other words, the way to figure out whether the link is up is to let the job run and catch & handle exceptions when there are problems.
    By default, a job scheduled via DBMS_JOB will automatically reschedule itself if there is an unhandled exception by geometrically backing off (it waits 1 minute after the first failure, 2 minutes after the second, 4, 8, 16, 32 minutes, etc until it's marked as broken after 16 failures). You could, of course, catch appropriate exceptions and handle them in a reasonable fashion and manually reschedule jobs at intervals that make more sense for your particular job.
    Justin

  • How to find back my lost iphone 5s if not install "Find My Iphone" apps

    How to find back my lost iphone 5s if not install "Find My Iphone" apps&software...???

    There is no way sorry
    If your iPhone, iPad, or iPod touch is lost or stolen

  • How to find whether the cookies are enabled or not

    Hi All,
    Please suggest me, while sending the first request only how to find whether the cookies are enabled or not.
    thanks.

    you could use a servlet, write a cookie and then try to read it, if it's read then it's enabled else not.

  • HT1766 How to find Macbook Pro using Itunes. Do not have Icloud or find my phone function.

    How to find Macbook Pro using Itunes. Do not have Icloud or find my phone function.

    1. This is the iPad forum.  For Macbook questions use the Macbook forum.
    https://discussions.apple.com/community/notebooks/macbook_pro
    The hosts will likely move the thread there shortly.
    2.  You can't use iTunes to find your computer.   You can use icloud.com from another computer to find it if you setup Find my Mac on the lost macbook pro.
    http://support.apple.com/kb/PH2698

  • How to find if Reconciliation Ledger is Active or not for Controlling Area

    Hi,
    How to find if Reconciliation Ledger is Active or not for Controlling Area?
    Thanks

    Hi,
    You can check using OKKP.
    Further TCode KALA is useful in activating/deactivating etc., for the Controlling Area.
    Rgds.

  • How to find out if Role is active or not and also delimited or not ?

    How to find out if Role is active or not and also delimited or not ?

    Hi,
    Basically this job is done by BASIS (Technical) Team.
    They can check whether role is active or not by using tcode "PFCG" by giving role name.
    Regards,
    Rameshwar

  • How to find out which cube/ods has the code

    hi,
    I want to find out which cube/ods has the start routine/update rules written in it.  Is there a table or Tcode to find out the code instead of opening each cube/ods to find out whether there is code in it or not.
    Thanks,
    Sam

    hi Sam,
    take a look
    /message/3483792#3483792 [original link is broken]
    try RSTRAN, field STARTROUTINE
    related tables
    RSAROUT
    RSAABAP
    RSAABAPINV
    RSAROUTT
    Technical name of start routine
    Re: How to get info about a GP* program?
    Re: Search for start, update rule, etc. that uses infoobject
    if couldnt find out, you can use ST05 'sql trace', open 2 session, one for create start routine, and one for ST05, activate with option 'sql trace', then create start routine and 'deactivate trace' and 'display trace', and check out the tables list
    hope this helps.

  • How's it possible my cube has 704 megs of Ram?

    I know, I know, I put it there (smiles). I know I bought Ram at one time and added it to the cube.
    My question: I can't remember what I added. I thought I may have added 512 megs Ram to what came with my cube, but the math doesn't work out. No matter how I work the math (either my cube had to come with 64 megs or 128 megs, right?) adding 512 to either of those doesn't come to 704 megs of ram? Did I add some odd amount of ram or what?
    By the way, how many slots does my cube have for ram (3?)
    Other questions: When I look for ram, should I look for ram that is a certain speed? Any other suggestions would be helpful. I know at one time that ram people were buying was iffy and apple even made a program to tell if you bought ram that wasn't working for a Mac (a lot of controversy over this years ago on this forum if anyone remembers).
    Any links to where I can get good yet cheap ram would be helpful.

    Hi,
    Your cube has 3 slots for RAM, numbered J7 (closest to video card), J8 and J9.
    Look in System Profiler for Memory, it should tell you the amount and slot it's in.
    Actually, when I add 64128512 = 704, at least my calculator says so.
    Cube spec's call for 512MB PC100 CL2 168 Pin SDRam 2-2-2, but it's getting hard to find. You can use SDRAM, PC133 • CL=2 • Unbuffered • Non-parity • 133MHz • 3.3V • 64Meg x 64, it is backward compatible.
    Places to buy-->
    *Omni:
    http://www.omnitechnologies.biz/cgi-bin/catalog/cp-app.cgi?usr=51F7450531&rnd=65 41566&rrc=N&affl=C&cip=&act=&aff=&pg=cat&ref=appleg4cube&catstr=
    *Crucial:
    http://www.crucial.com/store/listparts.asp?Mfr%2BProductline=Apple%2BPowerMac&mfr=Apple&tabid=AM&model=Power+Mac+G4Cube&submit=Go
    Normally I'd suggest OWC but they seem to be out of it. Where ever you purchase it, make sure they warranty "Apple Compatible" and have a good refund policy. BTW, Apple says that about everything, it's their way of dodging problems.
    Regards,
    Dave
    QS-1.5GHz, AGP-1.25 GHz, Cube-Dual 1.7 GHz   Mac OS X (10.4.3)  

  • How to find out which user has the permission to execute startsap ?

    Hi All
    How do I find out which user has the permission to execute the startsap and stopsap? Do I control the permission on those script using windows standard authorization? For example: only allow certain user have the read and write permission?
    Thank you.!
    Vincent Lo

    Well to me this is really weird question..
    <b>noone un-authorized should have access to OS on your system</b>
    If this is valid you do not need to solve problems who can and who cannot start/stop SAP, because if you want to prevent some users from shutting down the SAP you have really hard job to do - there are many ways how to kill the SAP (for example killing relevant process from task manager, killing of database, messing with services etc.) - yes, this is harmful way of stopping SAP, but we are talking about attack, right? I would contact some Windows specialist to help you disable all the ways how to harm the running SAP. But still after that - there are many files that can be modified/deleted so SAP will crash after restart - you need to protect them too, etc.
    In case you take the first assumption as granted (and you really limit access to this server) you do not need to worry who can stop or start SAP - at the other hand it may be handy to be able to start/stop SAP from other users - for this you can run the stop/start script "under different user".
    But to answer the question - to me this is question just of access control (but really never tried that myself):
    <a href="http://technet2.microsoft.com/WindowsServer/en/library/c6413717-511e-42bd-bd81-82431afe4b2a1033.mspx">Permit or restrict access to a snap-in for a domain</a> (or see other related links down there on this page)
    Please award points for useful answers.
    Thanks

Maybe you are looking for