How to find whether a given number is integer?

hello,
How can i find out whether a given number ( a variable after simplification holds a value) is an integer or not.?
I thought i could use isinteger( ) function in mathscript, but it does not exist- is giving error
can i do it without mathscript?
Thanks,
Solved!
Go to Solution.

I assume you want m/N to be a (possibly rounded up) integer. Is this correct.
In this case, you could do something like the following?
Message Edited by altenbach on 01-25-2009 04:47 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
DivideAndRoundUp.png ‏5 KB

Similar Messages

  • How to find whether an Invoice is been posted for a particular PO

    Hi,
    How to find whether an Invoice is been posted for a particular PO.
    I have a scenario where I fetch data into an internal table T_CDHDR(It has PO and other details). For each and every entry(PO) in that internal table I have to see whether an Invoice is been posted or not. They told to use <b>EKBE(Purchasing document history)</b> table. But, I don't know which field to check for and based on what conditions.
    Can someone help me with sample code or some valuable inputs.
    Thanks in advance.
    Regards,
    Paddu.

    HI,
    TABLE IS RIGHT.
    IN THAT TABLE FOR THE FIELD BEWTP CHECK WHETHER ENTRY IS "Q".
    Q STANDS FOR IR-L THAT MEANS INVOICE IS DONE.
    ON THE SELECTION SCREEN OF EKBE TABLE ENTER THE PO NUMBER.
    THEN CHECK WHETHER IT HAS ENTRY FOR BEWTP 'Q'.
    YOU CAN CROSS-CHECK THIS DATA FROM TABLE WITH THAT IN ACTUAL PO IN T.CODE - ME23N.
    ENTER PO NUMBER ,THEN IN ITEM DETAILS , IN HISTORY TAB SEE FOR THAT INVOICE NO.

  • Hi guys,Explain how to find whether the user request is dialog or bc ...

    how to find whether the user request is dialog or bc or some other wp and where we can see that ?

    Hello Damodar,
    You can find out that in SM50.
    However one piece of advice. I have noticed that you are raising lots of questions about very basic questions. Either you new to SAP or dont know anything about SAP Basis and want to get in this area. Or else you are preparing for some interview. In either of these cases expecting solutions given at SDN are not going to be of much help. Better read yorself in SAP Help as most people do. SDN should not be overly used for such purposes. Basic questions are welcome but you want to learn SAP through SDN !!!
    Regards.
    Ruchit.

  • How to find whether MIRO is done for a PO

    Hi All,
    Is there any indicator attached to POs that indicates whether MIRO is done for that PO?
    I mean after PO creation in ME21N -> GR in MIGO -> Excise (if applicable) and -> MIRO... how to find whether MIRO is done for a particular PO?
    Helpful tips will be gratefully rewarded...
    Regards,
    Karthik

    See if an entry exist in EKBE for the PO Number and its items.
    The complete process though is, to find the GR Quantity for each PO Item and see if it matches with the PO Item quantity.
      SELECT EBELN
             EBELP
             MENGE
             LOEKZ
        FROM EKPO
        INTO TABLE LT_EKPO
       WHERE EBELN = P_EBELN.
      IF NOT LT_EKPO[] IS INITIAL.
        SELECT EBELN
               EBELP
               MENGE
               BEWTP
               GJAHR
               BELNR
               BUZEI
               SHKZG
          FROM EKBE
          INTO TABLE LT_EKBE
          FOR ALL ENTRIES IN LT_EKPO
         WHERE EBELN = LT_EKPO-EBELN
           AND EBELP = LT_EKPO-EBELP
           AND VGABE = '1'.
      ENDIF.
      LOOP AT LT_EKBE.
    * Change the sign of the quantity for debit
        IF LT_EKBE-SHKZG = C_SHKZG_H.
          LT_EKBE-MENGE = -1 * LT_EKBE-MENGE.
        ENDIF.
        MOVE-CORRESPONDING LT_EKBE TO LT_EKBE_SUM.
        COLLECT LT_EKBE_SUM INTO LT_EKBE_SUM.
        CLEAR LT_EKBE_SUM.
        ENDLOOP.
       loop at it_ekpo.
    ** For each line item, calculate the total GR Quanity
        READ TABLE LT_EKBE_SUM WITH KEY EBELN = LT_EKPO-EBELN
                                        EBELP = LT_AWKEY-EBELP.
        IF SY-SUBRC = 0.
    * If the PO Item Quantity is equal to GR Quantity
            IF LT_EKPO-MENGE <= LT_EKBE_SUM-MENGE.
    * The PO Item can be considered completed GRed
            ENDIF.
        ENDIF.
      ENDLOOP.

  • How to find out spool requist number respective Sales Order

    hi,
    I need spool number respective to Sales Order, after print out script.While taking print out of sales order by selecting respective output type  i am able to get spool request number in table TSP01 .Upto eveything fine .But how to find this spool  request number is belongs to that Sales order.
    Regards,
    Eswar

    SELECT * FROM tsp01 WHERE
                 rq0name = sy-repid  AND
                 rq1name = d_suffix1 AND
                 rq2name = d_suffix2 AND
                 rqowner = sy-uname.
              WRITE:/ 'Spool request issued',
                    /  'Spool Number:', tsp01-rqident,
                    /  'Spool Name  :', tsp01-rq0name,
                    /  'Suffix 1    :' , tsp01-rq1name,
                    /  'Suffix 2    :', tsp01-rq2name,
                    /  'Owner       :', tsp01-rqowner,
                    /  'Device      :',tsp01-rqdest,
                    /  'Copies      :', tsp01-rqcopies,
                    /  'Processed   :', tsp01-rqpjreq.
              SKIP.
            ENDSELE

  • How to find out Inquiry  document number in sales quotation

    Hi all
    my client have requirement that while creating quotation with reference to inquiry number the system should copy inquiry number in sales quotation it should be save into any particulates field so base on that  he can configure  output determination can any one help me how to find out Inquiry  document number in sales quotation and what are the config step i need to do
    Thanks and regards
    rajesh

    Hi raj
    Firstly  , In Sales header data you can see the preceding document feild but i am not sure in which tab .
    Secondly, As far as document flow is concerned go to VA22 and then you will get the document number of the quotation and at the top you will get one small icon which is document flow , but i am, not sure with the shortcut but just check with  Shift +F2. then you can see the flow
    Regards
    Srinath

  • How to find out the Idoc number triggered for any material transfer frm SAP

    Hi Folks,
    Can any body let me know How to find out the Idoc number triggered for any material transfer frm SAP?
    Do we have any navigation for that in MM03?
    Thanks,
    SPMD.

    Hi Shabbirmdpasha,
    If you know the user name then you can find the idoc numbers created by that user. But the problem here is it not only gives the material it gives all the idocs created by that user. Go to SE16 --> table name EDIDS --> here you can fill the approximate date and in UNAME give the userid and execute. This will give all the idocs created by that user. I know it is only a partial solution.
    Also would suggest to post the same in abap forums for more answers:
    ABAP Development
    Regards,
    ---Satish

  • How to find out the IDOC number(urgent)

    hello every one,
    i had recived all the data to BW from R/3 but the request is still running in the system
    for this <b>i need to manually release the IDOC for BD87</b>
    can any one please help me <b>How to find out the Idoc Number in R/3 and In BW for the particular load</b>
    Regards
    Sandy

    hi Siva,
    thanks for ur valuable answer,
    it is showing IDoc num for the succeeded one....
    my present error is Data pack 1 got error and Datapack 2 was success,
    their 3IDocs are their in detail tab all are success
    as per my knowledge it will for the Data pack 2 and it is showing 3different
    how can i find the Idoc which was struck .....
    that need to process manually in BD87..
    please suggest if i am wrong
    Regards
    Sandy

  • How to find whether the installed sap software is 32 bit or 64 bit?

    How to find whether the installed sap software is 32 bit or 64 bit?
    Hi Community,
    We have Windows machine - 64 bit - x64. So, we can install either 32 bit or 64 bit sap software, both are supported, right. Now, a sap system is already installed on this machine and i would like to find out whether the sap software is 32 bit or 64 bit, how can i check?
    I have already seen under Menu System - Status - Other Kernel Info & at OS level, with the command disp+work but i cant find the info iam looking for.
    Please help.
    Regards,
    Mohan.

    Hi Sunny,
    Thank you very much for your quick reply.
    Didnt know that one has to look under "Compiled for".
    Regards,
    Mohan.

  • How to find whether my netbook is bluetooth enabled

    I want to connect to my Android Tablet via bluetooth to my netbook Aspire One running on Windows XP.
    How to find whether my netbook is bluetooth enabled ?
    K.R.Kumar

    Click Start, click Run, type bthprops.cpl, and then click OK.
    If your computer has bluetooth capabiliteis, it will launch "Bluetooth Devices". If you successfully opened Bluetooth Devices, then your computer does have Bluetooth capabilities, otherwise, it does not have...
    If it has:
    On the Options tab, click to select the Turn discovery on check box, and then click Apply. To enable Bluetooth devices to connect to your computer, click to select the Allow Bluetooth devices to connect to this computer check box, and then click OK.

  • How to find hp care pack number hw/sw product number

    how to find hp care pack number and hw/sw product number pls advice
    This question was solved.
    View Solution.

    Contact HP directly.
    This is the HP Consumer Global support forum and not a sales unit of HP.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How to find whether remote database is up or not (connected via dblink)

    Hi,
    I am using dblink to connect Biz database from Dev database.(Biz, Dev - database names)
    Running dbms job using the dblink from the Dev database to update data on Biz database...
    Problem is dbms job should run if and only if the Biz database is up for which i created the dblink...
    1) How to make sure or implement the check to find whether the Biz is database is up or not in Pl/sql or sql...
    2) How to reschedule the dbms jobs once the database is up
    pls suggest me how to find whether the database is up or not b4 running the dbms job?
    Using- Oracle 10g

    The only way to know whether the remote database is up (and whether the network between the two databases is up and whether the remote database's listener is up and whether the password configured in the database link is correct and whether the local TNS alias is correct, etc) would be to actually run a query against the remote database over the database link. In other words, the way to figure out whether the link is up is to let the job run and catch & handle exceptions when there are problems.
    By default, a job scheduled via DBMS_JOB will automatically reschedule itself if there is an unhandled exception by geometrically backing off (it waits 1 minute after the first failure, 2 minutes after the second, 4, 8, 16, 32 minutes, etc until it's marked as broken after 16 failures). You could, of course, catch appropriate exceptions and handle them in a reasonable fashion and manually reschedule jobs at intervals that make more sense for your particular job.
    Justin

  • HT4061 how to find my ipad serial number

    I'm trying to find my IPad serial number
    Also I'm not receiveing my email

    If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
    How to Find Your iPad Serial Number
    http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
     Cheers, Tom

  • How to find out Transfer requirement number rom Transfer order

    How to find out Transfer requirement number rom Transfer order
    I have a TO number, I need to find out the relevant TR number.
    Is there a way to directly find out?
    OR
    Is there a table where I can check.
    Regards
    Alex

    Hi
    I think the table will be either LQUA or LTAP but if you display the TO and drill down in to it you will find the TR number and by using F1 on the TR number field you will find the correct table that contains the data.
    I hope that this helps
    Frenchy.

  • How to find out my four number password for iphone4, how to find out my four number password for iphone4

    how to find out my four number password for iphone4, how to find out my four number password for iphone4

    There is no way to find out your four number password for your iPhone. If there were there would be no point in having a passcode. You can reset the phone as described here: http://support.apple.com/kb/HT1212.
    There is no way to find out your four number password for your iPhone. If there were there would be no point in having a passcode. You can reset the phone as described here: http://support.apple.com/kb/HT1212.

Maybe you are looking for