How to find whether any disk arry is connected in the system

Hi Guys,
Please help me regarding Disk Array.
1) What command(s) should I use to check whether any disk array is connected in the server or not.
2) Please share the method for,
For single server system (A single sun server is connected with exernal disk array).
For Cluster server system (Two servers are connected as a sun cluster and Disk array is connected to the cluster as resource).
3) If the disk array is from SUN or from other vendor, how can i know that?
4) How to find how many disks are available in the Disk array?
Thanks

Wow... I got a reply from nik !!!
Thanks for your reply..
*1) I have a confussion that format command only report the local disks not external disks(Disk array). Is that correct?*
2) We have a cluster server V890+V890 + Disk-Array(Sun StorageTek). The format output is below.
*(5,6,7 & 8 are disk array?)*
root# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e01924a4e1,0
1. c1t1d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e01a467d91,0
2. c1t2d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e019dd3151,0
3. c1t3d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e01a467321,0
4. c1t4d0 <SUN146G cyl 14087 alt 2 hd 24 sec 848>
/pci@8,600000/SUNW,qlc@2/fp@0,0/ssd@w500000e01922a001,0
5. c2t600A0B8000482D560000031B482A46BCd0 <SUN-CSM200_R-0619 cyl 51838 alt 2 hd 512 sec 64>
/scsi_vhci/ssd@g600a0b8000482d560000031b482a46bc
6. c2t600A0B8000482D5600000318482A46A6d0 <SUN-CSM200_R-0619 cyl 51838 alt 2 hd 512 sec 64>
/scsi_vhci/ssd@g600a0b8000482d5600000318482a46a6
7. c2t600A0B8000482DBC00000659482B59D3d0 <SUN-CSM200_R-0619 cyl 51838 alt 2 hd 512 sec 64>
/scsi_vhci/ssd@g600a0b8000482dbc00000659482b59d3
8. c2t600A0B8000482E200000049E482B599Ad0 <SUN-CSM200_R-0619 cyl 51838 alt 2 hd 512 sec 64>
/scsi_vhci/ssd@g600a0b8000482e200000049e482b599a
(End 0f output)
*3) For cfgadm output is given below*
root# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
PCI0 unknown empty unconfigured unknown
PCI1 unknown empty unconfigured unknown
PCI2 unknown empty unconfigured unknown
PCI3 unknown empty unconfigured unknown
PCI4 scsi/hp connected configured ok
PCI5 pci-pci/hp connected configured ok
PCI6 pci-pci/hp connected configured ok
PCI7 fibre/hp connected configured ok
PCI8 fibre/hp connected configured ok
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 CD-ROM connected configured unknown
c1 fc-private connected configured unknown
c1::500000e01922a001 disk connected configured unknown
c1::500000e01924a4e1 disk connected configured unknown
c1::500000e019dd3151 disk connected configured unknown
c1::500000e01a467321 disk connected configured unknown
c1::500000e01a467d91 disk connected configured unknown
c1::508002000065adb9 ESI connected configured unknown
c3 scsi-bus connected configured unknown
c3::rmt/0 tape connected configured unknown
c4 scsi-bus connected unconfigured unknown
c5 scsi-bus connected unconfigured unknown
c6 scsi-bus connected configured unknown
c6::rmt/1 tape connected configured unknown
c7 scsi-bus connected unconfigured unknown
c8 scsi-bus connected unconfigured unknown
c9 fc-private connected configured unknown
c9::200600a0b8482dab disk connected configured unknown
c10 fc-private connected configured unknown
c10::200500a0b8482dbd disk connected configured unknown
c11 fc-private connected configured unknown
c11::200700a0b8482dab disk connected configured unknown
c12 fc-private connected configured unknown
c12::200400a0b8482dbd disk connected configured unknown
usb0/1 unknown empty unconfigured ok
usb0/2 unknown empty unconfigured ok
usb0/3 unknown empty unconfigured ok
usb0/4 unknown empty unconfigured ok
*4) root# cfgadm -al -o show_FCP_dev*
Ap_Id Type Receptacle Occupant Condition
c1 fc-private connected configured unknown
c1::500000e01922a001,0 disk connected configured unknown
c1::500000e01924a4e1,0 disk connected configured unknown
c1::500000e019dd3151,0 disk connected configured unknown
c1::500000e01a467321,0 disk connected configured unknown
c1::500000e01a467d91,0 disk connected configured unknown
c1::508002000065adb9 ESI connected configured unknown
c9 fc-private connected configured unknown
c9::200600a0b8482dab,0 disk connected configured unknown
c9::200600a0b8482dab,1 disk connected configured unknown
c9::200600a0b8482dab,31 disk connected configured unknown
c10 fc-private connected configured unknown
c10::200500a0b8482dbd,0 disk connected configured unknown
c10::200500a0b8482dbd,1 disk connected configured unknown
c10::200500a0b8482dbd,31 disk connected configured unknown
c11 fc-private connected configured unknown
c11::200700a0b8482dab,0 disk connected configured unknown
c11::200700a0b8482dab,1 disk connected configured unknown
c11::200700a0b8482dab,31 disk connected configured unknown
c12 fc-private connected configured unknown
c12::200400a0b8482dbd,0 disk connected configured unknown
c12::200400a0b8482dbd,1 disk connected configured unknown
c12::200400a0b8482dbd,31 disk connected configured unknown
Which part of output is indicating diskarry.. Please help me to understand....
FYI
root@# more /etc/vfstab
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
#/dev/dsk/c1d0s2 /dev/rdsk/c1d0s2 /usr ufs 1 yes -
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/md/dsk/d103 - - swap - no -
/dev/md/dsk/d100 /dev/md/rdsk/d100 / ufs 1 no nologging
/dev/md/dsk/d115 /dev/md/rdsk/d115 /global/.devices/node@1 ufs 2 no global
swap - /tmp tmpfs - yes -
/dev/vx/dsk/ossdg/exporthome /dev/vx/rdsk/ossdg/exporthome /export/home ufs 2 no logging
/devices - /devices devfs - no -
ctfs - /system/contract ctfs - no -
objfs - /system/object objfs - no -
sharefs - /etc/dfs/sharetab sharefs - no -

Similar Messages

  • How to find whether an OSS note is applied in the system?

    Hi experts ,
    Can anyone explain how we can find if an OSS note is applied in the system.
    Please respond to the query, points will be awarded .
    Best Regards
    Anand

    Hi Subodh,
    Thanks for your reply and valuable information.
    I could not checked for snote and SPAU as I am not authorized. suppose a note has been applied throgh SNOTE , can we find this note in the code ?
    In my case  a particular note is applied for MM02 but when I check code I could find several note but not the note being disuceed.
    I will try to check with some one authorized for SNOTE in my client.
    Thanks again.
    Best Regards
    Anand
    Edited by: Anand Tripathi on Jan 19, 2008 7:52 PM

  • How to find my printer even tho its connected thru the usb plug

    I have the printer connected with the usb plug in and it still cannot seem to find the printer. what do i do?

    That's because you have to install the software and drivers. Was that done?
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How to identify whether any data source is created for a table?

    hi all,
    How to identify whether any extractions is been carried out for a particular table, view or function module(generic extraction)? from r/3.
    bcos i need to create an extraction for a table, view and function module. But  iam not sure whether any extractions is already been created for those tables, view, function modules??
    thanxs
    haritha

    Hi,
    By passing the following values as selection to table  ROOSOURCE we can find whether any data source has been created or not .
    EXMETHOD = V
    EXTRACTOR = Table name
    hope it helps..
    regards,
    raju

  • How to find out if disk drive is faulty already?

    How to find out if disk drive is faulty already?

    Hi Sükrü
    You can read the table E071 with the object id and get the transport request number. Use this transport request and read the table E070, the field "TRSTATUS" will give the status whether the object is locked or released.
    Hope this helps !
    Regards
    Ranganath
    PS : Reward points if found useful !

  • How to find whether MIRO is done for a PO

    Hi All,
    Is there any indicator attached to POs that indicates whether MIRO is done for that PO?
    I mean after PO creation in ME21N -> GR in MIGO -> Excise (if applicable) and -> MIRO... how to find whether MIRO is done for a particular PO?
    Helpful tips will be gratefully rewarded...
    Regards,
    Karthik

    See if an entry exist in EKBE for the PO Number and its items.
    The complete process though is, to find the GR Quantity for each PO Item and see if it matches with the PO Item quantity.
      SELECT EBELN
             EBELP
             MENGE
             LOEKZ
        FROM EKPO
        INTO TABLE LT_EKPO
       WHERE EBELN = P_EBELN.
      IF NOT LT_EKPO[] IS INITIAL.
        SELECT EBELN
               EBELP
               MENGE
               BEWTP
               GJAHR
               BELNR
               BUZEI
               SHKZG
          FROM EKBE
          INTO TABLE LT_EKBE
          FOR ALL ENTRIES IN LT_EKPO
         WHERE EBELN = LT_EKPO-EBELN
           AND EBELP = LT_EKPO-EBELP
           AND VGABE = '1'.
      ENDIF.
      LOOP AT LT_EKBE.
    * Change the sign of the quantity for debit
        IF LT_EKBE-SHKZG = C_SHKZG_H.
          LT_EKBE-MENGE = -1 * LT_EKBE-MENGE.
        ENDIF.
        MOVE-CORRESPONDING LT_EKBE TO LT_EKBE_SUM.
        COLLECT LT_EKBE_SUM INTO LT_EKBE_SUM.
        CLEAR LT_EKBE_SUM.
        ENDLOOP.
       loop at it_ekpo.
    ** For each line item, calculate the total GR Quanity
        READ TABLE LT_EKBE_SUM WITH KEY EBELN = LT_EKPO-EBELN
                                        EBELP = LT_AWKEY-EBELP.
        IF SY-SUBRC = 0.
    * If the PO Item Quantity is equal to GR Quantity
            IF LT_EKPO-MENGE <= LT_EKBE_SUM-MENGE.
    * The PO Item can be considered completed GRed
            ENDIF.
        ENDIF.
      ENDLOOP.

  • How to find whether an Invoice is been posted for a particular PO

    Hi,
    How to find whether an Invoice is been posted for a particular PO.
    I have a scenario where I fetch data into an internal table T_CDHDR(It has PO and other details). For each and every entry(PO) in that internal table I have to see whether an Invoice is been posted or not. They told to use <b>EKBE(Purchasing document history)</b> table. But, I don't know which field to check for and based on what conditions.
    Can someone help me with sample code or some valuable inputs.
    Thanks in advance.
    Regards,
    Paddu.

    HI,
    TABLE IS RIGHT.
    IN THAT TABLE FOR THE FIELD BEWTP CHECK WHETHER ENTRY IS "Q".
    Q STANDS FOR IR-L THAT MEANS INVOICE IS DONE.
    ON THE SELECTION SCREEN OF EKBE TABLE ENTER THE PO NUMBER.
    THEN CHECK WHETHER IT HAS ENTRY FOR BEWTP 'Q'.
    YOU CAN CROSS-CHECK THIS DATA FROM TABLE WITH THAT IN ACTUAL PO IN T.CODE - ME23N.
    ENTER PO NUMBER ,THEN IN ITEM DETAILS , IN HISTORY TAB SEE FOR THAT INVOICE NO.

  • Hi guys,Explain how to find whether the user request is dialog or bc ...

    how to find whether the user request is dialog or bc or some other wp and where we can see that ?

    Hello Damodar,
    You can find out that in SM50.
    However one piece of advice. I have noticed that you are raising lots of questions about very basic questions. Either you new to SAP or dont know anything about SAP Basis and want to get in this area. Or else you are preparing for some interview. In either of these cases expecting solutions given at SDN are not going to be of much help. Better read yorself in SAP Help as most people do. SDN should not be overly used for such purposes. Basic questions are welcome but you want to learn SAP through SDN !!!
    Regards.
    Ruchit.

  • How to find whether the installed sap software is 32 bit or 64 bit?

    How to find whether the installed sap software is 32 bit or 64 bit?
    Hi Community,
    We have Windows machine - 64 bit - x64. So, we can install either 32 bit or 64 bit sap software, both are supported, right. Now, a sap system is already installed on this machine and i would like to find out whether the sap software is 32 bit or 64 bit, how can i check?
    I have already seen under Menu System - Status - Other Kernel Info & at OS level, with the command disp+work but i cant find the info iam looking for.
    Please help.
    Regards,
    Mohan.

    Hi Sunny,
    Thank you very much for your quick reply.
    Didnt know that one has to look under "Compiled for".
    Regards,
    Mohan.

  • How to  check whether any table(s) required to shrink on database

    Hi,
    How to check whether any table(s) required to shrink on database
    Regards,
    Venkat

    Venkat wrote:
    Hi,
    Thi is Oracle 10g. How to use this?. I am not using toad etc...
    I am on SQL prompt.
    Regards,
    Venkat.
    for starter
    Generate Script to Shrink Segment Advisor Recommendations [ID 1171054.1]
    Automatic Segment Advisor in Oracle 10g Release 2 (10.2) [ID 314112.1]
    10g and above SEGMENT ADVISOR [ID 242736.1]
    Cheers

  • How to find whether my netbook is bluetooth enabled

    I want to connect to my Android Tablet via bluetooth to my netbook Aspire One running on Windows XP.
    How to find whether my netbook is bluetooth enabled ?
    K.R.Kumar

    Click Start, click Run, type bthprops.cpl, and then click OK.
    If your computer has bluetooth capabiliteis, it will launch "Bluetooth Devices". If you successfully opened Bluetooth Devices, then your computer does have Bluetooth capabilities, otherwise, it does not have...
    If it has:
    On the Options tab, click to select the Turn discovery on check box, and then click Apply. To enable Bluetooth devices to connect to your computer, click to select the Allow Bluetooth devices to connect to this computer check box, and then click OK.

  • How to find whether remote database is up or not (connected via dblink)

    Hi,
    I am using dblink to connect Biz database from Dev database.(Biz, Dev - database names)
    Running dbms job using the dblink from the Dev database to update data on Biz database...
    Problem is dbms job should run if and only if the Biz database is up for which i created the dblink...
    1) How to make sure or implement the check to find whether the Biz is database is up or not in Pl/sql or sql...
    2) How to reschedule the dbms jobs once the database is up
    pls suggest me how to find whether the database is up or not b4 running the dbms job?
    Using- Oracle 10g

    The only way to know whether the remote database is up (and whether the network between the two databases is up and whether the remote database's listener is up and whether the password configured in the database link is correct and whether the local TNS alias is correct, etc) would be to actually run a query against the remote database over the database link. In other words, the way to figure out whether the link is up is to let the job run and catch & handle exceptions when there are problems.
    By default, a job scheduled via DBMS_JOB will automatically reschedule itself if there is an unhandled exception by geometrically backing off (it waits 1 minute after the first failure, 2 minutes after the second, 4, 8, 16, 32 minutes, etc until it's marked as broken after 16 failures). You could, of course, catch appropriate exceptions and handle them in a reasonable fashion and manually reschedule jobs at intervals that make more sense for your particular job.
    Justin

  • How to find whether the cookies are enabled or not

    Hi All,
    Please suggest me, while sending the first request only how to find whether the cookies are enabled or not.
    thanks.

    you could use a servlet, write a cookie and then try to read it, if it's read then it's enabled else not.

  • HT1529 How to find another Apple ID is registered my Product the Serial number.

    How to find another Apple ID is registered my Product the Serial number.
    my Apple Product cannot register to my Apple ID.

    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

  • How to find out where sap error messages stored in our system

    How to find out where sap error messages stored in our system.like sometime we will get a error message with message number.whr it will be stored and whch table it is?

    Are you interested in WDA messages ?
    The set a breakpoint in METHODS IN class CL_WDR_MESSAGE_MANAGER.
    Then use call stack (default desktop 2 in debugger) to see where message is added to message manager.
    regards
    phil

Maybe you are looking for