How to find whether installed JDK is 32 bit or 64 bit in Windows

This is what i get in cmd prompt for java -version
java version "1.6.0_15"
Java(TM) SE Runtime Environment (build 1.6.0_15-b03)
Java HotSpot(TM) 64-Bit Server VM (build 14.1-b02, mixed mode)
Does this mean its 64 bit? Just wanted to ensure.
Am using Windows 7 64 bit.
Also is there any other usual approach to find out the same. Thanks in advance.

Yes, it's 64-bit, and no, java -version is what I write to check if it's 64-bit or not.

Similar Messages

  • How to find whether the installed sap software is 32 bit or 64 bit?

    How to find whether the installed sap software is 32 bit or 64 bit?
    Hi Community,
    We have Windows machine - 64 bit - x64. So, we can install either 32 bit or 64 bit sap software, both are supported, right. Now, a sap system is already installed on this machine and i would like to find out whether the sap software is 32 bit or 64 bit, how can i check?
    I have already seen under Menu System - Status - Other Kernel Info & at OS level, with the command disp+work but i cant find the info iam looking for.
    Please help.
    Regards,
    Mohan.

    Hi Sunny,
    Thank you very much for your quick reply.
    Didnt know that one has to look under "Compiled for".
    Regards,
    Mohan.

  • How to find and install right java for ECC6 intstallation on AIX5.3

    Hello
    I wander how to find and install right java for ECC6 intstallation on AIX5.3. I went thruroughly thru note 723909 and underlying 716927, 1008311 and 1039948 notes but I still do not understand.
    I guess I should logon to IBM site http://www.ibm.com/developerworks/java/jdk/aix/service.html
    where I can choose :
    " Java 1.4.2 64-bit "
    and then :
    "64-bit SDK 1.4.2 base images (at 1.4.2.0 level; in installp format) "->"Base SDK (required)
    Java14_64.sdk.tar  ((50001920)
    then I assume (on AIX ) I should "tar xvf Java14_64.sdk.tar".
    then I get extracted "Java14_64.sdk"
    Is this ok?
    I know on Linux(
    from IBM site I downloaded "IBMJava2-amd64-142.rpm"
    then I issued
    "rpm -i IBMJava2-amd64-142.rpm "
    and finally issued
    "export JAVA_HOME=/opt/IBMJava2-amd64-142")
    What in case of AIX5.3? Could you help me?

    I was told to use smitty (just I am not familiar with it). furdermore i do not hace read.me file. the ziped files are:
    Java14_64.ext
    -rw-rr 1  202 bin    371712 Mar  2  2010 Java14_64.license
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.ja_JP
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.Ja_JP
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.ko_KR
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.zh_CN
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.Zh_CN
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.zh_TW
    -rw-rr 1  202 bin      3072 Mar  2  2010 Java14_64.msg.Zh_TW
    -rw-rr 1  202 bin   4888576 Mar  2  2010 Java14_64.samples
    -rw-r----- 1 root root 67190784 Oct  4 09:53 Java14_64.sdk
    -rw-rr 1 root root 77370639 Nov 20 19:36 Java14_64.sdk.tar.gz
    -rw-r----- 1 root root 12612608 Oct  4 09:53 Java14_64.source

  • How to find whether an Invoice is been posted for a particular PO

    Hi,
    How to find whether an Invoice is been posted for a particular PO.
    I have a scenario where I fetch data into an internal table T_CDHDR(It has PO and other details). For each and every entry(PO) in that internal table I have to see whether an Invoice is been posted or not. They told to use <b>EKBE(Purchasing document history)</b> table. But, I don't know which field to check for and based on what conditions.
    Can someone help me with sample code or some valuable inputs.
    Thanks in advance.
    Regards,
    Paddu.

    HI,
    TABLE IS RIGHT.
    IN THAT TABLE FOR THE FIELD BEWTP CHECK WHETHER ENTRY IS "Q".
    Q STANDS FOR IR-L THAT MEANS INVOICE IS DONE.
    ON THE SELECTION SCREEN OF EKBE TABLE ENTER THE PO NUMBER.
    THEN CHECK WHETHER IT HAS ENTRY FOR BEWTP 'Q'.
    YOU CAN CROSS-CHECK THIS DATA FROM TABLE WITH THAT IN ACTUAL PO IN T.CODE - ME23N.
    ENTER PO NUMBER ,THEN IN ITEM DETAILS , IN HISTORY TAB SEE FOR THAT INVOICE NO.

  • Hi guys,Explain how to find whether the user request is dialog or bc ...

    how to find whether the user request is dialog or bc or some other wp and where we can see that ?

    Hello Damodar,
    You can find out that in SM50.
    However one piece of advice. I have noticed that you are raising lots of questions about very basic questions. Either you new to SAP or dont know anything about SAP Basis and want to get in this area. Or else you are preparing for some interview. In either of these cases expecting solutions given at SDN are not going to be of much help. Better read yorself in SAP Help as most people do. SDN should not be overly used for such purposes. Basic questions are welcome but you want to learn SAP through SDN !!!
    Regards.
    Ruchit.

  • I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW

    I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW, and all I need is to find WHERE I can download it. Thanks.

    cr is installed by updating your app.  use help>update, or update manually
    pre cc updates:  http://www.adobe.com/downloads/updates/
    cc updates:  http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
    cc 2104 updates:  http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

  • How to find whether MIRO is done for a PO

    Hi All,
    Is there any indicator attached to POs that indicates whether MIRO is done for that PO?
    I mean after PO creation in ME21N -> GR in MIGO -> Excise (if applicable) and -> MIRO... how to find whether MIRO is done for a particular PO?
    Helpful tips will be gratefully rewarded...
    Regards,
    Karthik

    See if an entry exist in EKBE for the PO Number and its items.
    The complete process though is, to find the GR Quantity for each PO Item and see if it matches with the PO Item quantity.
      SELECT EBELN
             EBELP
             MENGE
             LOEKZ
        FROM EKPO
        INTO TABLE LT_EKPO
       WHERE EBELN = P_EBELN.
      IF NOT LT_EKPO[] IS INITIAL.
        SELECT EBELN
               EBELP
               MENGE
               BEWTP
               GJAHR
               BELNR
               BUZEI
               SHKZG
          FROM EKBE
          INTO TABLE LT_EKBE
          FOR ALL ENTRIES IN LT_EKPO
         WHERE EBELN = LT_EKPO-EBELN
           AND EBELP = LT_EKPO-EBELP
           AND VGABE = '1'.
      ENDIF.
      LOOP AT LT_EKBE.
    * Change the sign of the quantity for debit
        IF LT_EKBE-SHKZG = C_SHKZG_H.
          LT_EKBE-MENGE = -1 * LT_EKBE-MENGE.
        ENDIF.
        MOVE-CORRESPONDING LT_EKBE TO LT_EKBE_SUM.
        COLLECT LT_EKBE_SUM INTO LT_EKBE_SUM.
        CLEAR LT_EKBE_SUM.
        ENDLOOP.
       loop at it_ekpo.
    ** For each line item, calculate the total GR Quanity
        READ TABLE LT_EKBE_SUM WITH KEY EBELN = LT_EKPO-EBELN
                                        EBELP = LT_AWKEY-EBELP.
        IF SY-SUBRC = 0.
    * If the PO Item Quantity is equal to GR Quantity
            IF LT_EKPO-MENGE <= LT_EKBE_SUM-MENGE.
    * The PO Item can be considered completed GRed
            ENDIF.
        ENDIF.
      ENDLOOP.

  • How to find whether my netbook is bluetooth enabled

    I want to connect to my Android Tablet via bluetooth to my netbook Aspire One running on Windows XP.
    How to find whether my netbook is bluetooth enabled ?
    K.R.Kumar

    Click Start, click Run, type bthprops.cpl, and then click OK.
    If your computer has bluetooth capabiliteis, it will launch "Bluetooth Devices". If you successfully opened Bluetooth Devices, then your computer does have Bluetooth capabilities, otherwise, it does not have...
    If it has:
    On the Options tab, click to select the Turn discovery on check box, and then click Apply. To enable Bluetooth devices to connect to your computer, click to select the Allow Bluetooth devices to connect to this computer check box, and then click OK.

  • Could not find an installed JDK, SCM Java Tools may not work until registry

    Hello all,
    I've downloaded the latest full version of Designer (10.1.2.3), but getting installation error: Could not find an installed JDK, SCM Java Tools may not work until registry
    Any solution?

    3. install the Designer 10.1.2.3 patch to the Developer suite home.When I try to do this at C:\oracle\product\Ora10gDSR2, I get a message OUI-10137: An Oracle Home with name OUIHome already exits at C:\OraHome (a directory that doesn't exist) please specify another name for Oracle Home.
    I don't want to just specify another name because cleaning up these faulty installations requires deleting registry keys, etc, since the deinstall does't really remove everything sufficiently to start with a clean slate.
    I also got the Java JDK message because the JDK 5 is no longer being put straight onto the C drive, it is buried in C:\Sun\SDK\jdk, so some java programs have to be pointed to it. The Oracle installer doesn't provide this option.
    Also, Michael, your post, "Re: Designer 10.1.2.3 on windows Xp Posted: Oct 20, 2007 7:05 AM in response to: mmehdi" is full of unreadable characters and question marks. Maybe I don't have a font you are using. There are also references to a zip file and a Word document that aren't there.
    Anyway, thanks for all your time and effort,
    Edward

  • How to find whether remote database is up or not (connected via dblink)

    Hi,
    I am using dblink to connect Biz database from Dev database.(Biz, Dev - database names)
    Running dbms job using the dblink from the Dev database to update data on Biz database...
    Problem is dbms job should run if and only if the Biz database is up for which i created the dblink...
    1) How to make sure or implement the check to find whether the Biz is database is up or not in Pl/sql or sql...
    2) How to reschedule the dbms jobs once the database is up
    pls suggest me how to find whether the database is up or not b4 running the dbms job?
    Using- Oracle 10g

    The only way to know whether the remote database is up (and whether the network between the two databases is up and whether the remote database's listener is up and whether the password configured in the database link is correct and whether the local TNS alias is correct, etc) would be to actually run a query against the remote database over the database link. In other words, the way to figure out whether the link is up is to let the job run and catch & handle exceptions when there are problems.
    By default, a job scheduled via DBMS_JOB will automatically reschedule itself if there is an unhandled exception by geometrically backing off (it waits 1 minute after the first failure, 2 minutes after the second, 4, 8, 16, 32 minutes, etc until it's marked as broken after 16 failures). You could, of course, catch appropriate exceptions and handle them in a reasonable fashion and manually reschedule jobs at intervals that make more sense for your particular job.
    Justin

  • How to find the installed CUCM iso is restricted or unrestricted?

    How to find the installed software in CUCM9.1(iso) is restricted or unrestricted??

    Hi,
    what u can do is u can login into OS administration through Putty . u get the details of VMWare .
    Same can be compared and checked with OVA templates in README  file
    http://www.cisco.com/web/software/283088407/97505/cucm_9.1_vmv8_v1.7.ova.README1.txt
    CUCM 7500 user node:
         Cisco Unified Communications Manager (CUCM) configuration that
         supports up to 7500 users per node.
         Details:
         Red Hat Enterprise Linux 5 (32-bit)
         CPU: 2 vCPU with 3600 MHz reservation
         Memory: 6 GB with 6 GB reservation
         Disk: 1 - 110 GB disk with pre-aligned disk partitions
    you can see UNRST in attached snapshot.
    regds,
    aman

  • How to find whether the cookies are enabled or not

    Hi All,
    Please suggest me, while sending the first request only how to find whether the cookies are enabled or not.
    thanks.

    you could use a servlet, write a cookie and then try to read it, if it's read then it's enabled else not.

  • Is there any way to find whether the private key is capable of 40 bits encr

    Is there any way to find whether the private key is capable of 40 bits encrypted or 128 bits encrypted.

    kanth_kanth wrote:
    Is there any way to find whether the private key is capable of 40 bits encrypted or 128 bits encrypted.Assuming an RSA private key, to get the number of bits extract the length of the 'modulus' in bytes and multiply by 8. How you extract the modulus depends on what format the private key has been stored in.

  • How to Find whether  JRE is installed in a system or not ?

    I have to write an application in which I want my app to find whether jre is installed or not ?
    Can any one help in this ? My E-Mail ID is
    [email protected]
    Kumanan.

    For windows OS this is the solution.
    Find out the following key in the registry.
    HKEY_LOCALMACHINE/Software/javaSoft/Java Runtime Environment
    if the key to javasoft is there then JRE is installed and to see the version of JRE look a level down further and you will find the versions.

  • How to find whether an application is installed or not

    Is there any way to find whether an application is installed or not
    and the path of the installed path
    I got that with executing reg query from my java aplication but for that
    reg tool should be installed ..
    Is there any way to get without that

    You can use an <installer-desc> to invoke
    a class that asks the user where it is, and
    if they do not know, or do not have it, it can
    be installed at the time (assuming you can
    provide an installer, appropriate for their OS).

Maybe you are looking for