How to find whether iphone is in warranty
Hi,
I am using an Iphone4 which was bought in UK and is officially unlocked.
Can some one please tell me how to find out whether my iphone is in warranty or not.
support page, left side, down,
looks like I'm tring to be a smart __ but just tring to get you there
Similar Messages
-
How to find my iPhone if they are still in offline mode ? My phone has been stollen in my college yesterday.
You can't.
What To Do If Your iDevice or Computer Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Mac Computer
Find My Mac can be used from Find My Phone at iCloud.com and via Find
My Phone on your iDevice.
The following is third-party anti-theft software:
1. STEM 2.1
2. MacPhoneHome 3.5
3. MacTrack 7.5.0
4. VUWER 1.7
5. Sneaky Bastar* 0.2.0
6. Undercover 5.1.1
7. LoJack for Laptops -
HT1529 how to find my iphone with the serial number
hi
could you please tell how to find my iphone with the serial number ?Sorry, there is no way to do that.
What To Do If Your iDevice or Computer Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Mac Computer
Find My Mac can be used from Find My Phone at iCloud.com and via Find
My Phone on your iDevice.
The following is third-party anti-theft software:
1. STEM 2.1
2. MacPhoneHome 3.5
3. MacTrack 7.5.0
4. VUWER 1.7
5. Sneaky Bastar* 0.2.0
6. Undercover 5.1.1
7. LoJack for Laptops
8. Hidden 2.0 -
Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two? also I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
Is it possible to have your whole family on one apple id or is it better to have each person have there own?
Yes, it is possible. 1 apple ID can be associated with up to 10 devices.
If each has their own does each id have to buy their own music and apps?
Yes, all purchases are non-transferable.
How does find my iphone work with one apple id or two?
Every device associated with one apple ID through Find my iPhone is tied to that Apple ID; Find my iPhone will work in the same way with up to ten devices associated with one apple ID. You cannot enable Find my iPhone for one device across two apple IDs
I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
If you have authorized a computer with the old apple ID, you can transfer old media purchased through the old to other devices via iTunes. This doesn't mean the media purchases through the old apple ID it transferred to the new account. If you plan to make future purchases and don't wish to share them with others, make your own apple ID. -
How to find whether an Invoice is been posted for a particular PO
Hi,
How to find whether an Invoice is been posted for a particular PO.
I have a scenario where I fetch data into an internal table T_CDHDR(It has PO and other details). For each and every entry(PO) in that internal table I have to see whether an Invoice is been posted or not. They told to use <b>EKBE(Purchasing document history)</b> table. But, I don't know which field to check for and based on what conditions.
Can someone help me with sample code or some valuable inputs.
Thanks in advance.
Regards,
Paddu.HI,
TABLE IS RIGHT.
IN THAT TABLE FOR THE FIELD BEWTP CHECK WHETHER ENTRY IS "Q".
Q STANDS FOR IR-L THAT MEANS INVOICE IS DONE.
ON THE SELECTION SCREEN OF EKBE TABLE ENTER THE PO NUMBER.
THEN CHECK WHETHER IT HAS ENTRY FOR BEWTP 'Q'.
YOU CAN CROSS-CHECK THIS DATA FROM TABLE WITH THAT IN ACTUAL PO IN T.CODE - ME23N.
ENTER PO NUMBER ,THEN IN ITEM DETAILS , IN HISTORY TAB SEE FOR THAT INVOICE NO. -
Hi guys,Explain how to find whether the user request is dialog or bc ...
how to find whether the user request is dialog or bc or some other wp and where we can see that ?
Hello Damodar,
You can find out that in SM50.
However one piece of advice. I have noticed that you are raising lots of questions about very basic questions. Either you new to SAP or dont know anything about SAP Basis and want to get in this area. Or else you are preparing for some interview. In either of these cases expecting solutions given at SDN are not going to be of much help. Better read yorself in SAP Help as most people do. SDN should not be overly used for such purposes. Basic questions are welcome but you want to learn SAP through SDN !!!
Regards.
Ruchit. -
How to find whether MIRO is done for a PO
Hi All,
Is there any indicator attached to POs that indicates whether MIRO is done for that PO?
I mean after PO creation in ME21N -> GR in MIGO -> Excise (if applicable) and -> MIRO... how to find whether MIRO is done for a particular PO?
Helpful tips will be gratefully rewarded...
Regards,
KarthikSee if an entry exist in EKBE for the PO Number and its items.
The complete process though is, to find the GR Quantity for each PO Item and see if it matches with the PO Item quantity.
SELECT EBELN
EBELP
MENGE
LOEKZ
FROM EKPO
INTO TABLE LT_EKPO
WHERE EBELN = P_EBELN.
IF NOT LT_EKPO[] IS INITIAL.
SELECT EBELN
EBELP
MENGE
BEWTP
GJAHR
BELNR
BUZEI
SHKZG
FROM EKBE
INTO TABLE LT_EKBE
FOR ALL ENTRIES IN LT_EKPO
WHERE EBELN = LT_EKPO-EBELN
AND EBELP = LT_EKPO-EBELP
AND VGABE = '1'.
ENDIF.
LOOP AT LT_EKBE.
* Change the sign of the quantity for debit
IF LT_EKBE-SHKZG = C_SHKZG_H.
LT_EKBE-MENGE = -1 * LT_EKBE-MENGE.
ENDIF.
MOVE-CORRESPONDING LT_EKBE TO LT_EKBE_SUM.
COLLECT LT_EKBE_SUM INTO LT_EKBE_SUM.
CLEAR LT_EKBE_SUM.
ENDLOOP.
loop at it_ekpo.
** For each line item, calculate the total GR Quanity
READ TABLE LT_EKBE_SUM WITH KEY EBELN = LT_EKPO-EBELN
EBELP = LT_AWKEY-EBELP.
IF SY-SUBRC = 0.
* If the PO Item Quantity is equal to GR Quantity
IF LT_EKPO-MENGE <= LT_EKBE_SUM-MENGE.
* The PO Item can be considered completed GRed
ENDIF.
ENDIF.
ENDLOOP. -
How to find my iphone back up file in pc without iphone connect
How to find my iphone back up file in itune without connect my iphone? I lost my phone and urgently need to find my contacts in PC, anyone can help?
You don't. It's gone. You should really pay more attention to the prompts that pop up on your computer before you just click 'ok'.
-
How will Find my iPhone app help me track my iphone if someone has disabled the location services which doesnt require an unlock code?
You can't, and the same if the thief turms off the phone.
What to do if your iOS device is lost or stolen
Reporting a lost or stolen Apple product -
How to find whether the installed sap software is 32 bit or 64 bit?
How to find whether the installed sap software is 32 bit or 64 bit?
Hi Community,
We have Windows machine - 64 bit - x64. So, we can install either 32 bit or 64 bit sap software, both are supported, right. Now, a sap system is already installed on this machine and i would like to find out whether the sap software is 32 bit or 64 bit, how can i check?
I have already seen under Menu System - Status - Other Kernel Info & at OS level, with the command disp+work but i cant find the info iam looking for.
Please help.
Regards,
Mohan.Hi Sunny,
Thank you very much for your quick reply.
Didnt know that one has to look under "Compiled for".
Regards,
Mohan. -
How to find whether my netbook is bluetooth enabled
I want to connect to my Android Tablet via bluetooth to my netbook Aspire One running on Windows XP.
How to find whether my netbook is bluetooth enabled ?
K.R.KumarClick Start, click Run, type bthprops.cpl, and then click OK.
If your computer has bluetooth capabiliteis, it will launch "Bluetooth Devices". If you successfully opened Bluetooth Devices, then your computer does have Bluetooth capabilities, otherwise, it does not have...
If it has:
On the Options tab, click to select the Turn discovery on check box, and then click Apply. To enable Bluetooth devices to connect to your computer, click to select the Allow Bluetooth devices to connect to this computer check box, and then click OK. -
How to find whether remote database is up or not (connected via dblink)
Hi,
I am using dblink to connect Biz database from Dev database.(Biz, Dev - database names)
Running dbms job using the dblink from the Dev database to update data on Biz database...
Problem is dbms job should run if and only if the Biz database is up for which i created the dblink...
1) How to make sure or implement the check to find whether the Biz is database is up or not in Pl/sql or sql...
2) How to reschedule the dbms jobs once the database is up
pls suggest me how to find whether the database is up or not b4 running the dbms job?
Using- Oracle 10gThe only way to know whether the remote database is up (and whether the network between the two databases is up and whether the remote database's listener is up and whether the password configured in the database link is correct and whether the local TNS alias is correct, etc) would be to actually run a query against the remote database over the database link. In other words, the way to figure out whether the link is up is to let the job run and catch & handle exceptions when there are problems.
By default, a job scheduled via DBMS_JOB will automatically reschedule itself if there is an unhandled exception by geometrically backing off (it waits 1 minute after the first failure, 2 minutes after the second, 4, 8, 16, 32 minutes, etc until it's marked as broken after 16 failures). You could, of course, catch appropriate exceptions and handle them in a reasonable fashion and manually reschedule jobs at intervals that make more sense for your particular job.
Justin -
How I find my iphone from my imac off. hvordan jeg finder min iphone fra min imac af?
hej jeg står og mangler hjælp til hvordan jeg finder min iphone fra min imac af?
hello I'm standing and need help with how I find my iphone from my imac off?Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
-
i lost my iphone. I already activate a lost mode on find my iphone. But find my iphone's message cannot be reached who stole my phone because my iphone has passcode. how to find my iphone? Please advise me about the best solution
Even though the phone has a passcode, the message sent when you activated lost mode would still be displayed. It is displayed on the lock screen. Following is a link to more details about Lost Mode: http://support.apple.com/kb/PH2700
-
How to find my iphone if i lost it?
how to find my iphone if i lost it?
If you didn't have Find My Phone turned on and activated, there is no way to locate your phone other than physically looking for it.
Maybe you are looking for
-
i lost everything on my iphone, how do i get just my apps back. i don't care about my pics or info i just want my itunes store safari and all the other ios stuff. what do i do?
-
How can i tell if my iphone is being tracked
How can i tell if my iphone 5 is being tracked?
-
I can't open or save a file if illustrator needs to open a new window to do so.
Hardware Overview: Model Name: iMac Model Identifier: iMac13,2 Processor Name: Intel Core i5 Processor Speed: 3.2 GHz Number of Processors: 1 Total Number of Cores: 4 L2 Cache (per C
-
Install. SAP NW 7.01 ABAP Trial Version on Win 7.0 Professional 64 bit OS
Dear Experts, I was trying to install SAP NetWeaver 7.01 ABAP Trial Version(SAP Management console -sapmmcX86u.msi from <extract_folder>\sapmmc) on Window 7.0 professional 64 bit machine,but getting the following error message. 'This installation doe
-
ITunes Setup Assistant Warning Dialogue Box
I upgraded to version 6.0.4.2 and now a dialogue box appears each time I start iTunes. It is titled "iTunes Setup Assistant" and has the following text: Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs