How to find whether the patch is applied or not in SOA?

Dear Legends,
I need to find a given patch(13615085) is applied or not in SOA Environment(RAC). I do not have O/s Level access, so I cannot issue Opatch lsinventory.
I tried
select * from dba_registry_history; - nothing is displayed.
Thanks in Advance,
Karthik

To check patchs installed:
From Opatch
$ORACLE_HOME/Opatch> opatch lsinventory
From sql
select * from dba_registry_history;
*To execute Opatch you don't need root privileges, you can also do it from oracle user
If you don't see anything executing "select * from dba_registry_history;" You haven't any patch installed.

Similar Messages

How to check whether a patch is applied or not when we apply a patch using patch.sh in oracle apps 11i

Hi,
If we apply patch using adpatch,we can know whether the patch is applied or not by checking ad_bugs,even with opatch we can check by using opatch lsinventory...
But when we apply patch with patch.sh then how can we find out whether a patch is applied or not.
I have to apply patch 14615390 and 16414360...but how can i know whether those patches are already applied or not. We have jre upgrade so we need to find out whether these patches or already applied or not.
Thanks in advance,

These are patches for Forms aren't they?
I think this has been addressed before
How to know if a patch has been applied to Forms?
As the mighty Hussein points out in that post, refer to How to verify if a patch has been installed (Doc ID 105158.1)
DA

How to find whether the cookies are enabled or not

Hi All,
Please suggest me, while sending the first request only how to find whether the cookies are enabled or not.
thanks.

you could use a servlet, write a cookie and then try to read it, if it's read then it's enabled else not.

How to find out the patch is critcal or not

Hello,
Right now I am referring "http://sunsolve.sun.com/search/document.do?assetkey=1-34-patchdiag.xref-1" for the patches and update details.
But there is no information about the patch severity(critical or not).
From where can I find the severity of patches?
Thanks in advance,
Chanthu

Well, patches labeled as 'recommended' or 'security' are typically critical in one way or another (R or S in the xref).
Other than that the typical way to determine if a patch is critical to your environment or not is to read through the readme files..
.7/M.

How to find whether the tables are needed or not?

Friends,
Difficult situation for me......
OS: RHEL AS 3.0
DB: Oracle 9i R2
I was taking table inventory.....
i saw many tables starting with SMP..... and EVT.....Nearly 50 tables.
some are...
EVT_HISTORY
EVT_DEST_PROFILE
EVT_CARRIER_CONFIGURATION
SMP_USER_DETAILS
SMP_UPDATESERVICES_CALLED_
SMP_SERVICE_ITEM_
SMP_SERVICE_GROUP_ITEM_
SMP_SERVICE_GROUP_DEFN_
SMP_SERVICE_DATA_
SMP_LONG_TEXT_
SMP_JOB_TASK_INSTANCE_
SMP_JOB_LIBRARY_
SMP_JOB_INSTANCE_
SMP_JOB_HISTORY_
SMP_JOB_EVENTLIST_
SMP_JOB_
SMP_EBU_SAVED_JOB_
SMP_EBU_ACTIVE_JOB_
SMP_CREDENTIALS$
SMP_BRM_TEMP_SCRIPTS_
SMP_BRM_SAVED_JOB_
SMP_BRM_RC_CONNECT_STRING_
SMP_BRM_DEFAULT_CHANNEL_
SMP_BRM_CHANNEL_DEVICE_
SMP_BRM_ACTIVE_JOB_
SMP_AUTO_DISCOVERY_PARMS_
SMP_AUTO_DISCOVERY_ITEM_
SMP_AD_PARMS_
SMP_AD_NODES_
SMP_AD_DISCOVERED_NODES_
SMP_AD_ADDRESSES_
more.........
Nobody knows whats the table is for....
Actually we were working with oracle 7.3 upto 2004. On 2004 we upgraded to 9iR2. May be the DBA in that time made some mistake.... i think so....thats why all these tables are still here....
I was not in the picture during that time.
Now my question is how can i know whether this table is necessary or not. I asked the developers here they said they are not using these tables. But my manager is afraid to delete these tables.
now what should i do?

Hi,
Yet another request to use my crystal ball.
We had one pc which is having oracle 9i enterprise manager configured(windows 2000) only to connect the db.
This remembers me of the Gospel of St. Luke, chapter 2, where it is stated,
'and they found the child in the manger'.
This resulted a Jewish theologian to remark: 'The manger? Well, so that must have been their own manger'
So what does 'the' db mean? The Linux one? Or a separate on Win2000?
It is quite possible to manage a Linux database using OEM on Win2000, with OMS on Win2000.
'But our server is not having enterprise manager'. Yet another riddle. Which server? There seem to be at least two.
1 Now if I drop these tables, will I be able to connect to our database using the windows2k pc through Enterprise Manager?
Yes, but only in standalone mode, and you can't use OEM alerts, and jobs anymore. You would be better off using Sqldeveloper, as OEM Sql worksheet is a nightmare.
2 That is your decision.
3
oemctl ping oms
will check whether you have an Oracle Management Server running.
You already seem to have the Enterprise Manager Repository, so you must have OMS running somewhere. (Why install the repository, if you don't use it)
Sybrand Bakker
Senior Oracle DBA

How to find whether remote database is up or not (connected via dblink)

Hi,
I am using dblink to connect Biz database from Dev database.(Biz, Dev - database names)
Running dbms job using the dblink from the Dev database to update data on Biz database...
Problem is dbms job should run if and only if the Biz database is up for which i created the dblink...
1) How to make sure or implement the check to find whether the Biz is database is up or not in Pl/sql or sql...
2) How to reschedule the dbms jobs once the database is up
pls suggest me how to find whether the database is up or not b4 running the dbms job?
Using- Oracle 10g

The only way to know whether the remote database is up (and whether the network between the two databases is up and whether the remote database's listener is up and whether the password configured in the database link is correct and whether the local TNS alias is correct, etc) would be to actually run a query against the remote database over the database link. In other words, the way to figure out whether the link is up is to let the job run and catch & handle exceptions when there are problems.
By default, a job scheduled via DBMS_JOB will automatically reschedule itself if there is an unhandled exception by geometrically backing off (it waits 1 minute after the first failure, 2 minutes after the second, 4, 8, 16, 32 minutes, etc until it's marked as broken after 16 failures). You could, of course, catch appropriate exceptions and handle them in a reasonable fashion and manually reschedule jobs at intervals that make more sense for your particular job.
Justin

Hi guys,Explain how to find whether the user request is dialog or bc ...

how to find whether the user request is dialog or bc or some other wp and where we can see that ?

Hello Damodar,
You can find out that in SM50.
However one piece of advice. I have noticed that you are raising lots of questions about very basic questions. Either you new to SAP or dont know anything about SAP Basis and want to get in this area. Or else you are preparing for some interview. In either of these cases expecting solutions given at SDN are not going to be of much help. Better read yorself in SAP Help as most people do. SDN should not be overly used for such purposes. Basic questions are welcome but you want to learn SAP through SDN !!!
Regards.
Ruchit.

How to find whether the installed sap software is 32 bit or 64 bit?

How to find whether the installed sap software is 32 bit or 64 bit?
Hi Community,
We have Windows machine - 64 bit - x64. So, we can install either 32 bit or 64 bit sap software, both are supported, right. Now, a sap system is already installed on this machine and i would like to find out whether the sap software is 32 bit or 64 bit, how can i check?
I have already seen under Menu System - Status - Other Kernel Info & at OS level, with the command disp+work but i cant find the info iam looking for.
Please help.
Regards,
Mohan.

Hi Sunny,
Thank you very much for your quick reply.
Didnt know that one has to look under "Compiled for".
Regards,
Mohan.

How to know whether the javascript is disabled or not while loading the jsp

Hi,
My query is like how to know whether the javascript is disabled or not while loading the Application main JSP in Mozilla browser.
I want some Java code or JavaScript code.

To the point, just let JS fire a specific HTTP request inside the same session.
This can be done in several ways. 1) Create a hidden <img> element and set the `src` attribute so that it will request a (fake) image from the server. The server just have to intercept on this specific request. 2) Fire an ajaxical request and let the server intercept on it. You can use a Filter for this which sets a token in the session scope to inform that the client has JS enabled.

How to find whether the created Sales Order is with BOM or without BOM ?

Hello,
I am technical guy i want to find whether the created sales order is with BOM or without bom.
Can anyone help me with table details.
Regards
VEk@

Go to TVAP & in FIELD STRUM give 'A' & PSGRP as 'SD01'.It will giveyou all the Item categories maintained in BOM.
Now you can cross - check with the Item Category maintain in the Sales Order.
Best Regards,
Ankur

How to find out the object is available or not in BC

Hi dear friends,
Suppose I want to design/create a Cube / ODS, before going to create that object, how to find out the same type of Object is available or not in BC with the specification which I want
Thanks in advance

Hi Paul,
at least you need to know the application you are talking about. Then you can goto that particular area and evaluate the content (cubes, infoobjects, infosources, datasources). It will surely give you an idea of the fulfilment of your requirements by the content.
Siggi

How to find whether an application is installed or not

Is there any way to find whether an application is installed or not
and the path of the installed path
I got that with executing reg query from my java aplication but for that
reg tool should be installed ..
Is there any way to get without that

You can use an <installer-desc> to invoke
a class that asks the user where it is, and
if they do not know, or do not have it, it can
be installed at the time (assuming you can
provide an installer, appropriate for their OS).

How to know whether the phone is replaced or not?

Dear All,
Please help in how to know whether Iphone 5 is replaced or not? I came to know that on replacement, imei number gets changed. please make me aware.

Nobody here can make you aware. You need to contact Apple directly.

How to find if the product is genuine or not?

I have bought KLV-32R482B LED TV, and i have doubt if the product is genuine or not? Please guide me to find if the product is genuine or not! Thanks

Hi Srinivasa,
each MDM client (like console, import manager, and so on) is a programm of its own. So if you start it, it's running. To check if the MDM server is running, the easiest way is to start the MDM Console and to mount the corresponding server. Then the server icon will show you the status. A red icon means: server is stopped. The green icon means: server is running. The same is valid for any repository installed on your MDM Server. Mount a repository and then the icon tells you if it's running or not.
Kind regards
Michael

How to find whether the Oracle Apps Instance is ShredAppltop or not

How shhould we find whether 11i/R12 is shared appltop/shared appstier enabled?
Is there any table to find this info.
How many ways we can find this?

Hi,
Please see this thread.
In R12 shared appltop/distributed appltop
In R12 shared appltop/distributed appltop
Thanks,
Hussein

How to find whether the patch is applied or not in SOA?

Similar Messages

Maybe you are looking for