How to find whether the sales order is intercompany or not?

Hi guys,
I created a sales order. In that i changed the plant which is there in other company code. so it bcomes like a intercompany sales order. but the problem is if i go to change mode how can I findout it as intercompany sales order.
thanks & regards.
venkat

Hi Venkat,
As every one have already explained other points,in standard SAP there is no provision to determine as if the sales order is intercompany or not.
But if you  want you can create a user status as normal sales order and intercompany sales order.So by checking the status at table level or in order you can determine if it is Intercompany or normal sales order.
Best way is to create a different document type itself which will be exclusively used for intercompany orders.So it will be easy for reporting and tracking purpose.
Reward points if useful
Regards,
Amrish Purohit

Similar Messages

  • How to find out the Sales order no based on spool no

    Hi Experts,
    Anyone tell me how to find out the Sales order no based on Spool no.
    Thanks and regards,
    Amjad

    Hello Mohammed,
    Please check the following SAP Spool tables for your spool request.
    You will find your required document number as an Object key in these tables.
    TSCMSTAT   --> Field OBJNO
    SOOS           --> Field APPLKEY (Document number will be a part of this key)
    If your document is getting printed by SAP Script, then dont forget to take SCR value in the OBJTP field while searching for your record.
    Thanks and Best Regards,
    Vikas Bittera.
    ***Points for Usefull answers ***

  • How to find whether the output file is generated or not?

    Hi,
    I ran EDI 855 program for one of our customer. The program succesfully completed and it shows in the logfile that few documents got processed and few lines got processed. But the output file in the outbound directory shows the file size as zero.
    Can anyone please let me know what could be the problem.
    And please let me know how to check whether flatfile is generated succesfully for the request run for any customer.
    Thanks in advance.
    Satya

    Hi Venkat,
    As every one have already explained other points,in standard SAP there is no provision to determine as if the sales order is intercompany or not.
    But if you  want you can create a user status as normal sales order and intercompany sales order.So by checking the status at table level or in order you can determine if it is Intercompany or normal sales order.
    Best way is to create a different document type itself which will be exclusively used for intercompany orders.So it will be easy for reporting and tracking purpose.
    Reward points if useful
    Regards,
    Amrish Purohit

  • How to find out the purchase order# giving the sales orde numer?

    Hi Gurus,
    how to find out the purchase order# giving the sales order# or material
    with regards
    thambe

    hi
    use va02-t.code
    double lick on line item data--> click on order data tab.
    there you can find the po details relavant to that sales oreder & the material.
    Thanks & Regards,
    krishna.

  • How to find that a sales order for which there is  delivery but no goods

    Hi
    How to find that a sales order for which there is  delivery but no goods issue has been done i.e we have an open delivery for a sales order.
    How in VBUK table can we find  out with the sales order no .
    Thanks in advance

    make use of table VBFA.
    Regards
    Peram

  • How to find who deletes sales order?

    Dear All:
    how to find who deleltes sales order ?and When ?
    Anyhelp will be appreciated!
    CynthiaYu
    20081221
    Edited by: yu Cynthia on Dec 21, 2008 4:19 AM

    Hi Cynthia
            Check in VA05 or VA05N list of sales orders  also where you can see the status of the sales document
           Apart from the above this standard  report will help you to some extent
            VEXP -Expiring SD Documents
        Regards
        Srinath
    Edited by: sri nath on Dec 21, 2008 11:34 AM

  • Hi guys,Explain how to find whether the user request is dialog or bc ...

    how to find whether the user request is dialog or bc or some other wp and where we can see that ?

    Hello Damodar,
    You can find out that in SM50.
    However one piece of advice. I have noticed that you are raising lots of questions about very basic questions. Either you new to SAP or dont know anything about SAP Basis and want to get in this area. Or else you are preparing for some interview. In either of these cases expecting solutions given at SDN are not going to be of much help. Better read yorself in SAP Help as most people do. SDN should not be overly used for such purposes. Basic questions are welcome but you want to learn SAP through SDN !!!
    Regards.
    Ruchit.

  • How to find whether the installed sap software is 32 bit or 64 bit?

    How to find whether the installed sap software is 32 bit or 64 bit?
    Hi Community,
    We have Windows machine - 64 bit - x64. So, we can install either 32 bit or 64 bit sap software, both are supported, right. Now, a sap system is already installed on this machine and i would like to find out whether the sap software is 32 bit or 64 bit, how can i check?
    I have already seen under Menu System - Status - Other Kernel Info & at OS level, with the command disp+work but i cant find the info iam looking for.
    Please help.
    Regards,
    Mohan.

    Hi Sunny,
    Thank you very much for your quick reply.
    Didnt know that one has to look under "Compiled for".
    Regards,
    Mohan.

  • How to find whether the cookies are enabled or not

    Hi All,
    Please suggest me, while sending the first request only how to find whether the cookies are enabled or not.
    thanks.

    you could use a servlet, write a cookie and then try to read it, if it's read then it's enabled else not.

  • How to find whether the created Sales Order is with BOM or without BOM ?

    Hello,
    I am technical guy i want to find whether the created sales order is with BOM or without bom.
    Can anyone help me with table details.
    Regards
    VEk@

    Go to TVAP & in FIELD STRUM give 'A' & PSGRP as 'SD01'.It will giveyou all the Item categories maintained in BOM.
    Now you can cross - check with the Item Category maintain in the Sales Order.
    Best Regards,
    Ankur

  • How to Find Out The Production Order Number For The Sales Order Line Items

    Hi All,
    I want to know the number of production orders for each sales order line item. I know the sales order number .Can anyone tell me how the tables can be linked to get all the production order numbers for each sales order line item.

    I think it depends on your configuration. But check fields KDAUF and KDPOS in table AUFK.  or in table AFPO.
    Regards,
    Rich HEilman

  • How to pick-up the sales order quantity

    Hello Friends,
    I am writing a report where I need to pickup the sales order details like, item no, material, qty etc.
    But when I check qty filed it is showing field "RV45A-KWMENG" here RV45A is the structure. So can I fetch qty in my report?
    Please help me,
    Shreekant

    Hi,
    I feel you would have the fecth the data from the table, structure will not give you the data against the quantity field, so when you are using the field in your program to fetch the data, look for the relevant table and use the quantity field from that table.
    Let me know if my views are correct and please rate my answer if you find it useful.
    Regards,
    MD.

  • How to get know the Sales Order IDOC#, if I know the created Sales Order#?

    Hi Experts,
    Let me know that, How to get know the IODC #, if I know the Sales Order#?
    Scenario is that, sales order(say 12345678) was created from Inbound EDI. I also Know the MATERIAL too.
    So, How to pull the associated Inbound ORDERS idoc, which is created this Sales order-12345678?
    Is it from EDID4 table? or EDIDC? or any thing else?
    reples r appreciated.
    thanq
    Edited by: SAP ABAPer on Sep 8, 2008 5:29 AM

    Hello
    This can be done much easier using fm SREL_GET_NEXT_NEIGHBORS:
    Input:
    OBJECT-OBJKEY = <number of sales order>  " with leading zeros!!!
    OBJECT-OBJTYPE = 'BUS2032'
    MAX_HOPS = '01'
    Result:
    NEIGHBORS-OBJKEY = <IDoc number with leading zeros>
    NEIGHBORS-OBJTYPE = 'IDOC'
    NEIGHBORS-ROLETYPE = 'INIDOC'.
    Regards
      Uwe

  • How to check whether the user has a certificate or not?

    Hi everyone.
    We're currently finishing a web project and the last step is to check whether users accessing the application have a valid certificate or not.
    Users with a valid certificate can access all the data. Users without any certificate installed on their browsers may still proceed, but they won't be able to see all data. Please note that the lack of a certificate doesn't mean an error - it's just another use case.
    Is there any way to check whether users have a certificate installed on their browsers?
    Thanks in advance.
    Edit: sorry, I forgot to post some tech details. We're using Struts 1.2 on a Tomcat 5 app server.
    Message was edited by:
    advaca

    I am not sure how Tomcat handles this, but you need to use two-way (mutual authentication) request but not enforce SSL between Tomcat and the client browser. This will make the browser prompt the user for the cert they want to send. Then you'll need to tackle the other part of your problem, getting the correct content displayed depending on whether the user sent a cert or not. I'm even less help there than I was on the first part of your question.
    So, yeah - good luck with that
    Lee

  • How to check whether the Application Server directory exits or not

    Hi,
    I have a selection screen in which I give the Application server file name(UNIX file) as input. Here, I would like to check whether the Server directory exists or not.
    Let us say, the path I gave in the selection screen is /usr/sap/tmp/testfile.txt . Here, the file name is testfile.txt and the server directory is /usr/sap/tmp . I would like to check whether this directory /usr/sap/tmp exists in the server or not. I am not bothered about the file name as I am going to write data into the file. I am mainly concerned about whether the directory exists in the server or not. and one more thing... this is the Application Server path not the Local path.
    Can anyone help me on the same how to check whether the server directory exists or not.
    Thanks in advance.
    Best Regards,
    Pradeep.

    Also you can use the FM EPS_GET_DIRECTORY_LISTING for this purpose.
      Store the directory name
        l_dpath = p_file+0(l_no).
      Validate the directory of the application server
        CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
          EXPORTING
            dir_name               = l_dpath
          TABLES
            dir_list               = l_i_dlist
          EXCEPTIONS
            invalid_eps_subdir     = 1
            sapgparam_failed       = 2
            build_directory_failed = 3
            no_authorization       = 4
            read_directory_failed  = 5
            too_many_read_errors   = 6
            empty_directory_list   = 7
            OTHERS                 = 8.
      If any problem occurs with the directory then display proper
      error message
        IF sy-subrc <> 0.
        Display error message
          MESSAGE e018 WITH 'Problem with directory entered'(008).
        ENDIF. " sy-subrc <> 0
    Regards,
    Joy.

Maybe you are looking for

  • TS3367 I can call my friend threw her face time, but she can not call me.

    My face time is able to call all my friends threw their face time. But when it comes to one of my friends, she can not call me or message me threw face time, she can't call anyone threw face time. I can't seem to figure out how to get hers to be able

  • Youtube goes blank on my imac

    When I open Safari on my iMac, and go to youtube.com the Safari window goes blank, and will not load the website.  It used to work, but hasn't for about a week now.

  • Setting up an External Content Type

    Is it possible to set up an External Content Type in SP Designer if the WCF service I'm using only has a method for creating an item in another system? I see that you must create a "Read Item" and "Read List" operation, and when I try to do so, it do

  • Flex page won't display

    I have both Flex 2 and ColdFusion 7.02 deployed on my JRun server. However, I cannot get any mxml pages to come up under my CF installation. I have tried running Ben Forta's Phones application that is on the Dev site, with no success. Can someone tel

  • Logic Pro quit unexpectedly while using AutoTuneAU_MM plugin

    Hello, I recently upgraded to OS 10.7 (for music reasons I've kept the OS in this range) and now when I'm working in Logic Pro 9.1.8 and I close a project or go to open a new project, I get: Logic Pro quit unexpectedly while using AutoTuneAU_MM plugi