How to find which datasource are using  tables AFRU ,CAUFV and AUFM

*how to find which datasource are using  tables AFRU ,CAUFV and AUFM*

Hi,
You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
Hope this helps.....
Regards,
SUman

Similar Messages

  • How to find which datasource is using table JCDS?

    How to find which datasource is using table JCDS?

    Hi,
    Please find the below link and identify whether will it meet your requirement or not ... If it meets your requirement then I can provide you more documents related to the same which we have in our project.   We were using the same for Plant Maintanance project...
    For this report the required information is gathering from the different data sources from the ECC system. This report requires object status functional location attributes, Equipment attributes and some specific information apart from normal transaction data for an order.
    u2022     Main feeding data sources for this report are 2LIS_17_ORDER and 2LIS_18_ORDER.
    u2022     Requires the object status data (system status, number object status and un-number system status) is feeding from different DSO where the status data is staging with different data flow.
    u2022     Requires the Order planned end date which is dependent on the operation  planned completion date. so we are feeding this field from Operationu2019s DSO where the planned date is staging with different data flow.
    u2022     Required characteristic data and attributes of the Functional location  is getting from the master data .The 0FUNCT_LOC is updating by master data data sources
    u2022     Required standard class  of the functional location is updating from other DSO where the  classification  data is staging with the help of different data flow.
    2LIS_17_ORDER and 2LIS_18_ORDER Data flow Details : No enhancement was done for these data sources .
    Status Data Flow Details:
    The status data is staged because ,this dat is required for the reports based on the Orders, Operations , Notifications, Functional Location and Equipment.
    To load suitable data to different DSOs from the Status DSO we maintain the Filters for status profile and status at DTP level.
    Required status change dates  are deriving based on changed on date ,system status while loading from status DSO to Order DSO.
    The system status ,Number object status and un- numberd object status are feeding from status DSO only.The status DSO is updating by u20180TE_OBJ_STATUS_HISTu2019.This Is based on the tables JCDS,JSTO and T000.
    JCDS     MANDT     =     JSTO     MANDT
    JCDS     OBJNR          =     JSTO     OBJNR
    T000     MANDT     =     JCDS     MANDT
    This DS has enhanced for the below  two fields
    1.     Order Number
    2.     Operation/Activity Number
    The Logic to populate the above two fileds is as below.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e4/1522bae6aa46b8802dca454e846d58/frameset.htm
    regards
    BVR

  • HR   how to find which personal area belongs to which country

    HR
    how to find which personal area belongs to which country
    thank you,
    Regards,
    Jagrut Bharatkumar shukla

    Hi,
        You can use the table T001P for finding that  for eg.,
    <b>Select molga from t001p where werks = 'Your Personnel area code'.</b>
    Thanks
    Yogesh

  • How to identify Which ports are using in RAC setup?

    Hi,
    how to identify Which ports are using in RAC setup?
    Thnaks,

    [Viewing Port Numbers and Access URLS|http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/ports.htm#sthref1208]

  • Which ports are used by oracle datbase and management agent other than 1521

    Hi,
    Which ports are used by oracle datbase and management agent other than 1521 and the default port of management agent?
    Regards,
    Rjiv.

    Check Port Numbers and Protocols of Oracle Components and also check your portlist.ini in $ORACLE_HOME/install directory.

  • How can I find which applications are using the most power?

    I have recently noticed a full charge of power doesn't last as long as it used to on my iPad 2.  Is there some way to determine which applications are using the most power?
    I have been monitoring my home network router accesses and have noticed the iPad logs accesses every 15 seconds.  This only happened recently.  It had been well behaved and only accessing once or twice a day before.  I installed the most recent iTunes upgrade, per suggestions during a Sync.  The problems seemed to occur after this update.  I have gone through all the settings and have minimized the applications requiring higher power (I switch off the location services unless I'm away from home.  Likewise, I turn off my cellular carrier unless I'm away from home, etc.)
    In short, how can I maximize my power usage (aside from turning it off)?
    Thanks.
    Dave

    Thanks for responding so quickly.
    I'm really trying to find out why the battery is depleting much faster than it used to all of a sudden.  I used to be able to put a full charge on it and it would last about 5 to 6 days with normal use (normal for me).  Now that battery only lasts about 2 to 3 days with the same use.
    I DO recharge it when it needs to be charged but this is indicating there is something else (new) that is causing the power drain.

  • How to find which users has used external scripting

    I want to find out the users who used the scripting for doing any mass changes activity.

    Hi Murphy;
    Please check which user has which forms open? and Re: how to determine which forms are currently open?
    Hope it helps you in your issue
    Regard
    Helios

  • How to determine which processes are using a module?

    I want to find out which processes are using a kernel module.
    However this info is shown neither with ``lsmod'' nor in
    /sys/modules/<mod_name>/.
    It's needed to reload certain modules which are acting buggy,
    in a bash script. Right now I just keep a list of processes which
    use the module and try to kill'em all, not exactly a beautiful
    solution.
    To work around it I compiled a kernel with
    ``CONFIG_MODULE_FORCE_UNLOAD=y'', however actually
    trying to unload anything with this results in an unstable system.
    Suggestions?

    After successfully syncing the configuration database I ran the configuration compliance job once more, however with the same (misleading) results. Cross-checking the configuration reveals that none of the devices marked as compliant are actually having the "ip helper-address" configured.
    Maybe it is something wrong with the input data I specified for the compliance template (ref step 1-6 in my first post)?
    Or maybe the Compliance Jobs arent the best ways to determine whether or not my devices are having the "ip helper-address" configuration defined?

  • How to find which devices are still using affected domain controller

    Hi Everyone,
    We have a 5 Domain controller's in a Site. And we are going to decommisson one of our affected DC in a site.
    Can you please let me know how to find  the log files to see which devices are still using this domain controller.
    Regards,
    Neel kamal
    Neel kamal

    Neel,
    From strictly an Active Directory perspective, there is nothing special you need to do to decommission a domain controller in a site.  There are many processes that automatically balance out and recreate connections as needed without any user intervention. 
    The DC Locator process will automatically direct clients to active domain controllers, there is nothing you need to do here. 
    What you need to be concerned with are things like the following:
    DNS - Are you running AD integrated DNS and is the DC you are decommissioning hosting that roll - if so, is it the ONLY DC in the
    site that is running DNS?  You'll need at least one in the site.
    DHCP server - Is the DC you are demoting a DHCP server?  You'll need to account for that.
    Global Catalog - Is the DC you are demoting a Global Catalog server?  You'll need at least one in the site.
    File Shares - Is the DC hosting any files shares?  You'll need to move those and make sure you redirect your clients.
    Was this DC a set as a Preferred Bridgehead Server?  You'll need to undo that first.
    Those are the big ones that come to mind.  Decommissioning a DC is easy if you have prepared properly.  The others that have replied have offered some great advice which you should follow.  Do your homework and you should be fine.
    Hope that helps
    Gary
    Gary G. Gray
     MCP, MCTS, MCITP, MCT Alumni
    Please remember to mark the replies as answers if they are helpful.
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • How to find which custom program uses authorization checks

    Hi all,
    I have been asked to find out which custom ABAP program in our organization is using Authorizations checks and which is not.
    Since there are thousands of custom programs I will need to automatize this process somehow.  But I am not an ABAP expert and I will need some help.
    Could any of you give me an idea of what would be the best strategy to find out if authorization objects/checks exist in a number of ABAP programs?  (would a simple text search do?).
    Many thanks,
    Aldo

    If you are looking out for Authorization related to Execution of any program, then look for entries in table TRDIR where field SECU (Authorization Group) is not blank.
    Below SAP documentation may help you:
    Authorization Group
    Authorization group to which the program is assigned.
    The assignment of a program to an authorization group plays a role when the system checks whether the user is authorized to:
    Execute a program
    --> Authorization object S_PROGRAM
    Edit a program (-Include) in the ABAP Workbench
    --> Authorization object S_DEVELOP
    Programs that are not assigned to an authorization group are not protected against display and execution.
    Security-related programs should, therefore, always be assigned to an authorization group.
    Report RSCSAUTH can also be used to assign programs to authorization groups. This report is documented in detail.

  • How to enhance the datasource 0SRM_TD_PO using table BBP_PDIHP

    In R3 when any PO is deleted at the header/item level the field LOEKZ is populated in tables EKKO(Header)/EKPO(item level).
    Similarly in SRM when any PO is deleted at the header/item level the field DEL_IND is populated in tables BBP_PDHGP(Header)/BBP_PDIHP(item level). In current situation we have standard datasource 0SRM_TD_PO, this has a field as ITM_DEL_IND which is coming from table BBP_PDIHP(item level) and its always blank and its not getting populated , so we are not able to eliminate the deleted PO's in BW.
    To overcome this, I have a following approach :
    =====================================
    Enhance the datasource 0SRM_TD_PO to include a "ZZDELIND" field and populate this field via CMOD from tables BBP_PDHGP(Header)/BBP_PDIHP(item level). The issue is I'm not able to determine the relation/join/data model between the datasource and the tables. The datasource 0SRM_TD_PO has a PO#(OBJECT_ID) but the tables BBP_PDHGP(Header)/BBP_PDIHP(item level) dont have a PO# instead these tables have a key as "GUID"which is HEXA decimal.
    Can someone please help me out.

    two ways:
    1. call FM bapi_po_getdetail and pass the PO number, you will get all your details
    2. pass PO number to CRMD_ORDERADM_H to get the the GUID and use this GUID on BBP_PDHGP(if version control is active then you need to consider the active version only)
    and for item guid, pass the GUID picked from CRMD_ORDERADM_H to CRMD_ORDERADM_I-HEADER, you will get all the item guids as CRMD_ORDERADM_I.
    this can be passed to BBP_PDIGP.
    there are beautiful views as well joining these tables(BBP_PDVIEW*).. which you can use as well

  • How to find which Query is using program AQ10MM==========Z6============

    Hi,
    I wanted to know how to find out which SAP query uses this program. AQ10MM==========Z6============
    I tried with SQ01/02 but was unable to get it. Can you please help.
    Regards,
    Mukund S

    In my installation , it is usually AQZZ"usergroup"========QUERYNAME======
    You could see if you have a user group 'MM' or '10MM' in SQ03 and set the user group if available.. then in SQ01, see if you have a query called Z6
    Also try out this function module RSAQ_DECODE_REPORT_NAME to see if it would give you the user group and query name...

  • How to find which backups are running  - whether RMAN or EXPORT or EXPDP ?

    I need to find using SQL which backups are running at a particular time . I want to use SQL for this.

    Hi,
    Check the V$session view to get it.
    SELECT SID,PROGRAM FROM V$SESSIONThe program will give you the
    In case of export it will give you - exp.exe under the PROGRAM
    In case of expdp it will give you - expdp.exe under the PROGRAM
    In case of RMAN session it will give you -
           SID PROGRAM
           140 exp.exe
           158 expdp.exe
           138 rman.exe
           149 rman.exeRegards,
    Vijayaraghavan K

  • How to find which queries is using which indexes

    So, I have a db 11gr2 and many indexes. Since I would like to delete some of them, I could see which indexes are unused, but I would like to see if some of indexes are used ony by one or two queries...
    how could I found that?

    If you have license for AWR views, use the below sql to identify indexes used.
    This script has following bind variable
    a1: owner
    a and b: begin and end of snapshot
    a2: tablespace name where your index exists
    As suggested in this thread, do not plan to drop Foriegn key indexes if they are not listed.
    col object_name for a30
    col tablespace_anme fora 12
    col count for 9999
    col operation for a35
    col options for a25
    set lines 160
    select c.*, d.tablespace_name
    from (select
    a.object_name ,
    a.operation ,
    a.options ,
    count(1)
    from
    dba_hist_sql_plan a,
    dba_hist_sqlstat b
    where
    a.object_owner ='&a1'
    and
    a.operation like '%INDEX%'
    and
    a.sql_id = b.sql_id
    and b.snap_id between &a and &b
    group by
    a.object_name,
    a.operation,
    a.options
    order by
    4 desc) c,
    dba_segments d
    where c.object_name=d.segment_name
    and d.tablespace_name='&a2'

  • How to find which user is using the index?

    Hi All,
    I have an index named 'CTXT_ITEM_CODE' . The Index _type is Domain. When i try to drop this index its telling ORA-00054: resource busy and acquire with NOWAIT specified error
    now i need to find out which session is using this index, so that i can kill it and drop the index.
    Thanks

    SELECT c.owner,
           c.object_name,
           c.object_type,
           b.SID,
           b.serial#,
           b.status,
           b.osuser,
           b.machine
      FROM v$locked_object a, v$session b, dba_objects c
    WHERE b.SID = a.session_id AND a.object_id = c.object_id
    AND c.object_name='CTXT_ITEM_CODE';
    ALTER SYSTEM KILL SESSION '<sid, serial#>'

Maybe you are looking for