How to find which datasource is using table JCDS?

Hi,
Please find the below link and identify whether will it meet your requirement or not ... If it meets your requirement then I can provide you more documents related to the same which we have in our project.   We were using the same for Plant Maintanance project...
For this report the required information is gathering from the different data sources from the ECC system. This report requires object status functional location attributes, Equipment attributes and some specific information apart from normal transaction data for an order.
u2022     Main feeding data sources for this report are 2LIS_17_ORDER and 2LIS_18_ORDER.
u2022     Requires the object status data (system status, number object status and un-number system status) is feeding from different DSO where the status data is staging with different data flow.
u2022     Requires the Order planned end date which is dependent on the operation planned completion date. so we are feeding this field from Operationu2019s DSO where the planned date is staging with different data flow.
u2022     Required characteristic data and attributes of the Functional location is getting from the master data .The 0FUNCT_LOC is updating by master data data sources
u2022     Required standard class of the functional location is updating from other DSO where the classification data is staging with the help of different data flow.
2LIS_17_ORDER and 2LIS_18_ORDER Data flow Details : No enhancement was done for these data sources .
Status Data Flow Details:
The status data is staged because ,this dat is required for the reports based on the Orders, Operations , Notifications, Functional Location and Equipment.
To load suitable data to different DSOs from the Status DSO we maintain the Filters for status profile and status at DTP level.
Required status change dates are deriving based on changed on date ,system status while loading from status DSO to Order DSO.
The system status ,Number object status and un- numberd object status are feeding from status DSO only.The status DSO is updating by u20180TE_OBJ_STATUS_HISTu2019.This Is based on the tables JCDS,JSTO and T000.
JCDS     MANDT     =     JSTO     MANDT
JCDS     OBJNR          =     JSTO     OBJNR
T000     MANDT     =     JCDS     MANDT
This DS has enhanced for the below two fields
1.     Order Number
2.     Operation/Activity Number
The Logic to populate the above two fileds is as below.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e4/1522bae6aa46b8802dca454e846d58/frameset.htm
regards
BVR

Similar Messages

How to find which datasource are using tables AFRU ,CAUFV and AUFM

*how to find which datasource are using tables AFRU ,CAUFV and AUFM*

Hi,
You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
Hope this helps.....
Regards,
SUman

How to find which Query is using program AQ10MM==========Z6============

Hi,
I wanted to know how to find out which SAP query uses this program. AQ10MM==========Z6============
I tried with SQ01/02 but was unable to get it. Can you please help.
Regards,
Mukund S

In my installation , it is usually AQZZ"usergroup"========QUERYNAME======
You could see if you have a user group 'MM' or '10MM' in SQ03 and set the user group if available.. then in SQ01, see if you have a query called Z6
Also try out this function module RSAQ_DECODE_REPORT_NAME to see if it would give you the user group and query name...

How to enhance the datasource 0SRM_TD_PO using table BBP_PDIHP

In R3 when any PO is deleted at the header/item level the field LOEKZ is populated in tables EKKO(Header)/EKPO(item level).
Similarly in SRM when any PO is deleted at the header/item level the field DEL_IND is populated in tables BBP_PDHGP(Header)/BBP_PDIHP(item level). In current situation we have standard datasource 0SRM_TD_PO, this has a field as ITM_DEL_IND which is coming from table BBP_PDIHP(item level) and its always blank and its not getting populated , so we are not able to eliminate the deleted PO's in BW.
To overcome this, I have a following approach :
=====================================
Enhance the datasource 0SRM_TD_PO to include a "ZZDELIND" field and populate this field via CMOD from tables BBP_PDHGP(Header)/BBP_PDIHP(item level). The issue is I'm not able to determine the relation/join/data model between the datasource and the tables. The datasource 0SRM_TD_PO has a PO#(OBJECT_ID) but the tables BBP_PDHGP(Header)/BBP_PDIHP(item level) dont have a PO# instead these tables have a key as "GUID"which is HEXA decimal.
Can someone please help me out.

two ways:
1. call FM bapi_po_getdetail and pass the PO number, you will get all your details
2. pass PO number to CRMD_ORDERADM_H to get the the GUID and use this GUID on BBP_PDHGP(if version control is active then you need to consider the active version only)
and for item guid, pass the GUID picked from CRMD_ORDERADM_H to CRMD_ORDERADM_I-HEADER, you will get all the item guids as CRMD_ORDERADM_I.
this can be passed to BBP_PDIGP.
there are beautiful views as well joining these tables(BBP_PDVIEW*).. which you can use as well

How to find which users has used external scripting

I want to find out the users who used the scripting for doing any mass changes activity.

Hi Murphy;
Please check which user has which forms open? and Re: how to determine which forms are currently open?
Hope it helps you in your issue
Regard
Helios

How to find which user is using the index?

Hi All,
I have an index named 'CTXT_ITEM_CODE' . The Index _type is Domain. When i try to drop this index its telling ORA-00054: resource busy and acquire with NOWAIT specified error
now i need to find out which session is using this index, so that i can kill it and drop the index.
Thanks

SELECT c.owner,
       c.object_name,
       c.object_type,
       b.SID,
       b.serial#,
       b.status,
       b.osuser,
       b.machine
FROM v$locked_object a, v$session b, dba_objects c
WHERE b.SID = a.session_id AND a.object_id = c.object_id
AND c.object_name='CTXT_ITEM_CODE';
ALTER SYSTEM KILL SESSION '<sid, serial#>'

How to find which custom program uses authorization checks

Hi all,
I have been asked to find out which custom ABAP program in our organization is using Authorizations checks and which is not.
Since there are thousands of custom programs I will need to automatize this process somehow. But I am not an ABAP expert and I will need some help.
Could any of you give me an idea of what would be the best strategy to find out if authorization objects/checks exist in a number of ABAP programs? (would a simple text search do?).
Many thanks,
Aldo

If you are looking out for Authorization related to Execution of any program, then look for entries in table TRDIR where field SECU (Authorization Group) is not blank.
Below SAP documentation may help you:
Authorization Group
Authorization group to which the program is assigned.
The assignment of a program to an authorization group plays a role when the system checks whether the user is authorized to:
Execute a program
--> Authorization object S_PROGRAM
Edit a program (-Include) in the ABAP Workbench
--> Authorization object S_DEVELOP
Programs that are not assigned to an authorization group are not protected against display and execution.
Security-related programs should, therefore, always be assigned to an authorization group.
Report RSCSAUTH can also be used to assign programs to authorization groups. This report is documented in detail.

How to find which queries is using which indexes

So, I have a db 11gr2 and many indexes. Since I would like to delete some of them, I could see which indexes are unused, but I would like to see if some of indexes are used ony by one or two queries...
how could I found that?

If you have license for AWR views, use the below sql to identify indexes used.
This script has following bind variable
a1: owner
a and b: begin and end of snapshot
a2: tablespace name where your index exists
As suggested in this thread, do not plan to drop Foriegn key indexes if they are not listed.
col object_name for a30
col tablespace_anme fora 12
col count for 9999
col operation for a35
col options for a25
set lines 160
select c.*, d.tablespace_name
from (select
a.object_name ,
a.operation ,
a.options ,
count(1)
from
dba_hist_sql_plan a,
dba_hist_sqlstat b
where
a.object_owner ='&a1'
and
a.operation like '%INDEX%'
and
a.sql_id = b.sql_id
and b.snap_id between &a and &b
group by
a.object_name,
a.operation,
a.options
order by
4 desc) c,
dba_segments d
where c.object_name=d.segment_name
and d.tablespace_name='&a2'

How to find which authentication used to site collection and site using powershell

Hi,
How to find how-many web app, sitecollection, site used Windows authentication,claim authentication and classic, secure store authention , adfs authentication using powershell code in sharepoint 2013.
If sites are used adfs authentication how to find which email id used for that.
Thanks,

Authentication is only defined at the Web Application level, and the only valid auth methods are Classic (Windows (Basic/NTLM/Kerberos)), Claims (Windows (Basic/NTLM/Kerberos)), FBA Claims, , SAML Claims (ADFS), and Anonymous.
You can find out what authentication scheme(s) are enabled via:
$wa = Get-SPWebApplication http://webApp1$wa.IisSettings["Default"] #replace with the zone name you're interested in
The output will look similar to this:
PS C:\Users\trevor> $wa.IisSettings["Default"]
AuthenticationMode : Forms
MembershipProvider : i
RoleManager : c
AllowAnonymous : False
EnableClientIntegration : True
ServerBindings : {Microsoft.SharePoint.Admini
stration.SPServerBinding}
SecureBindings : {}
UseWindowsIntegratedAuthentication : True
UseBasicAuthentication : False
DisableKerberos : True
ServerComment : SharePoint
Path : C:\inetpub\wwwroot\wss\Virtu
alDirectories\spwebapp180
PreferredInstanceId : 42768054
UseClaimsAuthentication : True
ClaimsAuthenticationRedirectionUrl :
UseFormsClaimsAuthenticationProvider : False
FormsClaimsAuthenticationProvider :
UseTrustedClaimsAuthenticationProvider : False
UseWindowsClaimsAuthenticationProvider : True
OnlyUseWindowsClaimsAuthenticationProvider : True
WindowsClaimsAuthenticationProvider : Microsoft.SharePoint.Adminis
tration.SPWindowsAuthenticat
ionProvider
ClaimsAuthenticationProviders : {Windows Authentication}
ClaimsProviders : {}
ClientObjectModelRequiresUseRemoteAPIsPermission : True
UpgradedPersistedProperties : {}
So on this Web Application in the Default Zone you can tell I have Windows Claims enabled, not using Kerberos (so using NTLM), and Trusted (SAML/ADFS) is not enabled, neither is Forms or Anonymous.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to find which transparent tables compose cluster tableuFF1AKONV

How to find which transparent tables compose cluster table：KONV

Hi,
Welcome to SDN.
Try doing this ....
1). Goto se12 and display the table BSEG
2). Click on the Delivery & Maintenanace tab
3). Double click on the Pool/Cluster field
4). On the next screen do a where used list
You will find all the related tables.
Regards,
Amit
Reward all helpful replies.

How to find the list of existing tables in a schema using DB link?

Hi
I know how to find the list of existing tables in a schema using the following query
SQL> select * from tab;
but, how to list the tables using a DB link?
For Example
SQL> select * from tab@dblink_name;
why this doesn't work?
Pl advice me
Thanks
Reddy.

ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link?

How to find out the Non Partitioned Tables used 2Gb on oracle

Hi team
how to find out the Non Partitioned Tables used > 2Gb on oracle where not is sys & system
regards

heres 1 I made earlier
set pagesize 999
set linesize 132
col owner format a25
col segment_name format a60
select owner,segment_name,segment_type,(bytes/1024/1024)"MB size"
from dba_segments
where owner not in ('SYS','SYSTEM','XDB','MDSYS','SYSMAN') -- edit for taste
and segment_type = 'TABLE'
having (bytes/1024/1024) > 2000
group by bytes, segment_Type, segment_name, owner
order by 4 asc

How to find which model of iPhone 5 I am using? and is that GSM or CDMA?

How to find which model of iPhone 5 I am using? A1428 or A1429 ? Is there any short code you can dial in and check the model number ?
And which is GSM or CDMA out of this model.

If you purchased the phone in the US with an AT&T contract then you have the locked CDMA A1428 version of the iPhone 5.
At the moment and if the contract is a new contact, then you won't be able to get the phone unlocked at the moment and no, you won't be able to use it in your home country. You will also have LTE 4G compatibility issues too and your phone will only work on 3G and also you need to remember that iPhones are only covered by country specific warranty, so it is only covered in the US, so if you go home and then have a problem with your phone, you will have to come back to the US to get it repaired.
You need to approach AT&T about whether they will unlock your phone for you as they are the ONLY ones that can do it, but the answer to your question is no and if you had wanted to use your phone at home, then you should not have purchased it in the US. The best that you can hope for at the moment is to use it on international/roaming.
If you purchased your phone in the US, then it will be a CDMA phone. You don't have a GSM phone, but GSM phones are unlocked anyway and these are the ones that are selling in Canada and the UK.
If you have your phone on an AT&T contract then ultimately, AT&T are the only ones who can help you with any questions regarding unlocking and they are the only ones who can unlock it for you, noone else.

How to find function module's and tables used for the particulat screen or TCODE?

Hello Nation,
I would like to know how to find the function modules and tables used for the particular screen or TCODE or program.
Example : I would like know the function module used in the program RDBGFT?
How can i find that?
Thanks in advance ,Awaiting your reply.

Make use of Find function with the keyword "CALL FUNCTION".
Make use of the same find function with the keyword "Select" to know the database tables used.
Regards,
Philip.

How to find which version of JDK is loadjava using

Hi All,
How to find which version of JDK is loadjava using?
I am using Oracle : 9.0.1.5.1 and I need to use class javax.crypto.Cipher which is shipped with JDK 1.4.2, but loadjava is unable to import javax.crypto.*;
Any inputs would be greatly appreciated.
Thanks and regards,
Abba

Abba,
From memory only (since I haven't verified it), "loadjava" is a script, so you can have a look at its contents. I believe it actually uses JDK 1.1.8 (which is part of the Oracle installation). In any case, Oracle 9i is compatible with JDK 1.3 only.
Oracle 10g is compatible with JDK 1.4.
Good Luck,
Avi.

How to find which datasource is using table JCDS?

Similar Messages

Maybe you are looking for