How to find which files are in the library

Hi there,
I keep almost all of my library as referenced files on external hard-drives because of the small hard-drive that my MBP has. BUT over time I've added some pictures here and there that are stored in my Aperture library. I would like to relocate these pictures, but I don't know which ones they are.
I can go picture by picture and find them, but I would like an easier way.
Is there a way to find all the pictures that are stored in the aperture library?

Bring up the entire Library, for instance by clicking on the All Photos Album.
Open the search HUD and use the 'plus' button to add a search by File Status.
You now have a choice of searching by online/offline and managed/referenced.
Ian

Similar Messages

How do I change which files are in the library?

Both my husband and I access iTunes under different login ids on one computer. I went into his iTunes to import a cd and discovered that although "his" music folder is the designated media folder, his iTunes is also displaying all of my library in his library. How do I change it so that only "his" music is displayed in his iTunes?

Album or Book?
If Album you can find the ones not already used:
File -> New Smart Album
Album -> is not -> Any
Regards
TD

How can I know which photos are in the library was used in each album I have created before.

How can I know which photos are in the library was used in each album I have created before?
I have many photos in the library folder of iPhoto, but actually I don't know which photos were used in my album.
Is there any method to find this?
Thanks.

Album or Book?
If Album you can find the ones not already used:
File -> New Smart Album
Album -> is not -> Any
Regards
TD

How to find which function module write the relevant idoctype?

Dear All,
how to find which function module write the relevant idoctype?

Hi,
Generally the function modules of the idoc types are having a naming convention as IDOC_INPUT for inbound processing and IDOC_OUTPUT for outbound processing followed by the idoc type name
for example : For IDOC type ORDERS
the inbound function module will be IDOC_INPUT_ORDERS and for outbound IDOC_OUTPUT_ORDERSP
In this way you can find the function module for a particular IDOC
P.S: Hope this is what you have asked for
Regards
Sarves

How to find which datasource are using tables AFRU ,CAUFV and AUFM

*how to find which datasource are using tables AFRU ,CAUFV and AUFM*

Hi,
You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
Hope this helps.....
Regards,
SUman

HR how to find which personal area belongs to which country

HR
how to find which personal area belongs to which country
thank you,
Regards,
Jagrut Bharatkumar shukla

Hi,
You can use the table T001P for finding that for eg.,
Select molga from t001p where werks = 'Your Personnel area code'.
Thanks
Yogesh

How to find out what are all the change pointers assoicated for an idoc ??

Hi ,
How to find out what are all the change pointers activated for an idoc ??
Thanks,
Varma

Verma,
You can check what are the active Change Pointers for the message type in tcode BD50
Use tcode BD61 to check whether change pointers are active or not??
Hope this helps..

How can I find which applications are using the most power?

I have recently noticed a full charge of power doesn't last as long as it used to on my iPad 2. Is there some way to determine which applications are using the most power?
I have been monitoring my home network router accesses and have noticed the iPad logs accesses every 15 seconds. This only happened recently. It had been well behaved and only accessing once or twice a day before. I installed the most recent iTunes upgrade, per suggestions during a Sync. The problems seemed to occur after this update. I have gone through all the settings and have minimized the applications requiring higher power (I switch off the location services unless I'm away from home. Likewise, I turn off my cellular carrier unless I'm away from home, etc.)
In short, how can I maximize my power usage (aside from turning it off)?
Thanks.
Dave

Thanks for responding so quickly.
I'm really trying to find out why the battery is depleting much faster than it used to all of a sudden. I used to be able to put a full charge on it and it would last about 5 to 6 days with normal use (normal for me). Now that battery only lasts about 2 to 3 days with the same use.
I DO recharge it when it needs to be charged but this is indicating there is something else (new) that is causing the power drain.

How to see which files are open on shares

Im fairly new to OS X Server. Am running OS X Server 10.6.8
How can i see files that are open through AFP or SMB? I've tried the command lsof but that doesnt seem to show open files through network.

Try smbstatus.
To pin down exactly which files are locked for use, try:
smbstatus | grep -i deny_write
For AFP, I'm not sure exactly how it's done -- there isn't an afpstatus command, so I'm a bit in the dark. However, you could probably use a combination of lsof and grep to find any objects of type REG and owned by applefile.
Maybe this:
sudo lsof | grep -i "^applefile" | grep REG
But that will return everything in use by the AppleFile service. From there, though, one may need to be familiar with what shares are on the system to further deduce what's open. For example, I get 10 lines returned, but only one of them contains a known share name (/Users/username/path/to/file), the rest are system directories (/System, /private, /usr, /Library and the like).
Hope this helps a bit.

How to find, which file present inside .ZIP?

Hi Experts,
I have test_20130303010203.dat file after ziping it the file name is test_20130305010203.dat.zip.
My question is how can i find which file got ziped?(in code).
Lets say i have 10 .dat file already in the same path where i am unziping my file....how can i find my unziped file?
Please help me

Hi Asma,
How is your question related to SSIS?
To find out you need to see what and how zips/unzips the file up.
I assume you are free to choose how you proceed, so then why not using a utility at your disposal set to unzip the files to the needed directory?
Arthur My Blog

How to tell which items are in iTunes library on disc but not in program library?

I made a mistake the other night and I deleted some items from my iTunes library ... but NOT from disc.
These items are still in my 65 gig iTunes library on disc. Somewhere.
I'd like to re-add these songs. Is there any way to tell which songs in the iTunes library on disc are not in the iTunes program library?
I don't want to have to add all 65 gigs again and then remove all the duplicates
thanks!

You should try dragging some files already in the library into iTunes to see what happens. I just did, and the new iTunes 10.6 seems to be ignoring them. I then made a copy of a file already in the library, and I added both it and the original by dragging and dropping. Only the new file was added. There was no warning about duplicates in either test. So you may be able to drag your whole library back into iTunes.
For when you do want to determine what files on disk aren't in the iTunes library or vice versa, here's one way to do it (if there's an easier way, I'm all ears):
Export your library as a playlist to a text file.
Use a program that can recursively list all your files on disk as full paths and save its output to a text file.
Load the into a decent text editor. I use Notepad++. Then use a regexp search/replace to tidy up the files so that both consist of one fully qualified filename per line.
Sort the files.
Diff the files and examine the differences.
I can do both 4 and 5 in Notepad++.

Deduplication: how to identify which files are "in-policy" (and which are not)?

Dear experts,
in eventlog I find the following information for one of my deduplicated volumes:
Volume: F: (\\?\Volume{9794e270-fb08-487e-979b-8a08fa9ca311}\)
Error code: 0x0
Error message:
Savings rate: 24
Saved space: 853327714684
Volume used space: 2681869406208
Volume free space: 66771247104
Optimized file count: 1199618
In-policy file count: 1188049
Job processed space (bytes): 0
Job elapsed time (seconds): 2
Job throughput (MB/second): 0
Some things look strange to me:
- The savings rate is only 24% which looks odd because I get about 40% on other file shares with similar characteristics.
- The "Optimized file count" is higher than the "in-policy" file count.
- The volume has about 3.5 million files but only 1.1 million files are "in-policy".
My understanding of "in-policy" files is that all files are in-policy which are older than 3 days (if not configured different, which is not the case) and which are not contained in an excluded folder (nothing configured here) and which have no
excluded file extension (nothing configured here apart from the default). Right?
I'm sure that only a small fraction of the files on this volume are younger than three days, so something seems to be wrong there, but I have no idea how to find the cause of the problem.
Is there any way to identify the files (full path) which are considered to be not "in-policy"?
How can I find out if the optimization process really looks at all files - and doesn't skip a million?
Thanks!
Regards
Christoph

Mandy, thanks for your feedback! I've read these technet articels, but I couldn't learn something really helpfull related to my problem there. To make investigation of the problem easier I did the following:
- created a brand new empty volume (x:) on the same server
- enabled data deduplication on that volume with a minimal file age of 0 days
- copied about 2GB of data from the problem-volume in 15450 files to this new volume
- started "Start-DedupJob x: -Type Optimization -Memory 50"
After a few seconds that job completed and I got the following result:
Volume: X: (\\?\Volume{d1ba9ed8-28f1-44d1-9535-fe603d6a70c6}\)
Error code: 0x0
Error message:
Savings rate: 0
Saved space: 12360718
Volume used space: 3091664896
Volume free space: 7610097664
Optimized file count: 153
In-policy file count: 153
Job processed space (bytes): 46095214
Job elapsed time (seconds): 9
Job throughput (MB/second): 4.88
The question is: why are only 153 files in-policy?
All files (of more than 15000) are of course "older than 0 days", there are no excluded folders configured, there are no excluded extensions configured, no file has one of the default excluded extensions and more than 1000 files are bigger than 100kB
(minimal size for deduplication is 32kB). So what makes only 153 files qualify for deduplication?
My impression is that there are further undocumented requirements which have to be met by a file to qualify for deduplication. But if there's no detailed log of an optimization run available how to find out what's going on?
(Or is something going wrong on my server?)
Kind Regards
Christoph

How to view which files are take up most space?

Is there a script which will produce a list of which folders/files are taking up the most space? I want to create some free space on the HD and would like to find out what's taking up the most space.
Thanks

Hi Crhis, most likely there is a Script, or Terminal commands but...
How much free space is on the HD, where has all the space gone?
OmniDiskSweeper is likely the easiest/best, and is now free...
http://www.omnigroup.com/applications/omnidisksweeper/download/

How to find which devices are still using affected domain controller

Hi Everyone,
We have a 5 Domain controller's in a Site. And we are going to decommisson one of our affected DC in a site.
Can you please let me know how to find the log files to see which devices are still using this domain controller.
Regards,
Neel kamal
Neel kamal

Neel,
From strictly an Active Directory perspective, there is nothing special you need to do to decommission a domain controller in a site. There are many processes that automatically balance out and recreate connections as needed without any user intervention.
The DC Locator process will automatically direct clients to active domain controllers, there is nothing you need to do here.
What you need to be concerned with are things like the following:
DNS - Are you running AD integrated DNS and is the DC you are decommissioning hosting that roll - if so, is it the ONLY DC in the
site that is running DNS? You'll need at least one in the site.
DHCP server - Is the DC you are demoting a DHCP server? You'll need to account for that.
Global Catalog - Is the DC you are demoting a Global Catalog server? You'll need at least one in the site.
File Shares - Is the DC hosting any files shares? You'll need to move those and make sure you redirect your clients.
Was this DC a set as a Preferred Bridgehead Server? You'll need to undo that first.
Those are the big ones that come to mind. Decommissioning a DC is easy if you have prepared properly. The others that have replied have offered some great advice which you should follow. Do your homework and you should be fine.
Hope that helps
Gary
Gary G. Gray
MCP, MCTS, MCITP, MCT Alumni
Please remember to mark the replies as answers if they are helpful.
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

How to find which backups are running - whether RMAN or EXPORT or EXPDP ?

I need to find using SQL which backups are running at a particular time . I want to use SQL for this.

Hi,
Check the V$session view to get it.
SELECT SID,PROGRAM FROM V$SESSIONThe program will give you the
In case of export it will give you - exp.exe under the PROGRAM
In case of expdp it will give you - expdp.exe under the PROGRAM
In case of RMAN session it will give you -
       SID PROGRAM
       140 exp.exe
       158 expdp.exe
       138 rman.exe
       149 rman.exeRegards,
Vijayaraghavan K

How to find which files are in the library

Similar Messages

Maybe you are looking for