How to find which model of iPhone 5 I am using? and is that GSM or CDMA?
How to find which model of iPhone 5 I am using? A1428 or A1429 ? Is there any short code you can dial in and check the model number ?
And which is GSM or CDMA out of this model.
If you purchased the phone in the US with an AT&T contract then you have the locked CDMA A1428 version of the iPhone 5.
At the moment and if the contract is a new contact, then you won't be able to get the phone unlocked at the moment and no, you won't be able to use it in your home country. You will also have LTE 4G compatibility issues too and your phone will only work on 3G and also you need to remember that iPhones are only covered by country specific warranty, so it is only covered in the US, so if you go home and then have a problem with your phone, you will have to come back to the US to get it repaired.
You need to approach AT&T about whether they will unlock your phone for you as they are the ONLY ones that can do it, but the answer to your question is no and if you had wanted to use your phone at home, then you should not have purchased it in the US. The best that you can hope for at the moment is to use it on international/roaming.
If you purchased your phone in the US, then it will be a CDMA phone. You don't have a GSM phone, but GSM phones are unlocked anyway and these are the ones that are selling in Canada and the UK.
If you have your phone on an AT&T contract then ultimately, AT&T are the only ones who can help you with any questions regarding unlocking and they are the only ones who can unlock it for you, noone else.
Similar Messages
-
How to find which version of JDK is loadjava using
Hi All,
How to find which version of JDK is loadjava using?
I am using Oracle : 9.0.1.5.1 and I need to use class javax.crypto.Cipher which is shipped with JDK 1.4.2, but loadjava is unable to import javax.crypto.*;
Any inputs would be greatly appreciated.
Thanks and regards,
AbbaAbba,
From memory only (since I haven't verified it), "loadjava" is a script, so you can have a look at its contents. I believe it actually uses JDK 1.1.8 (which is part of the Oracle installation). In any case, Oracle 9i is compatible with JDK 1.3 only.
Oracle 10g is compatible with JDK 1.4.
Good Luck,
Avi. -
How to find which type of extraction to be used
Hello,
Can any one help me out to find out which extraction type to be used in different situations.
Thanks,
Raghavendra.Hi,
For logistics modules like MM,SD,PP,PM ,etc you'll use the LO cockpit. Any extractors starting with 2LIS are all LO extractors.
All datasource/extractors starting with 0 are the non LO extractors. So FI extractors are non LO extractors.
If none of the std extractors meet your needs then you create generic extractors using tables/views, Query or function module.
Cheers,
Kedar -
How to find out whether my Iphone 3Gs (OS version 3.1.3) is officlially unlocked ( factory unlocked ) or "made" unlocked ? Can I upgrade its current OS 3.1.3 to OS 5 even if my phone is not officlially unlocked ? how to up grade its OS ? what are there any better ways to do it ?
Thanks,
PRANAJDepends wher you obtained the iPhone from and it's original supplier
If the iPhone is an authorised unlock ( approved by the carrier) or was
purchased from Apple as an unlocked iPhone updating the iOS
will have no effect on the iPhone and it's lock status
HOWEVER if the software has been tampered with to remove the lock,
updating the iOs will lock the iPhone back to the original carrier who holds the lock
To find out the status of your iPhone you could call Apple support
and they may tell you if the iPhone is locked or not and if it is which carrier -
Which model of iphone 6 will offer in Australia?
which model of iPhone 6 will offer in Australia?
how can I get model A1586??
Which model will offer by Vodafone AU????We are not Apple. We don't know. You can call and ask Vodafone AU.
-
How to find the manufacturer of iPhone?
How to find the manufacturer of iPhone?
model no my devise is : MD382LLI've updated the new version IOS 6 BETA 4. My phone is diverted to the problem.
If I diverted to another state is diverted out.
Restore is should I do to correct.
Please get help.
Thanks -
How could I find which i-views/pages are being used
Hello
I am pritty new in portal area. I have to administrate an ESS/MSS portal during hollydays. I am trying to find everywhere the way.
How could I find which i-views/pages are being used. Let say I can see which group I belong and which roles are behind.
How could I know in which PCD folder they are taken into account (to e.g give permission to someone not in the group)HI,
the user administration (UME) gives you the information about the user <-> group <-> role assignment.
When you know the role, search in the PCS for it, open the role and you will see all the pages / iviews assigned to the role.
SAP Help: Role Assignment: http://help.sap.com/saphelp_nw04s/helpdata/en/59/bf2287b3cb5e48af94f99929ad15b9/content.htm
SAP Help: Content Administration: http://help.sap.com/saphelp_nw04s/helpdata/en/5a/0339000c0b11d7b84800047582c9f7/content.htm
br,
Tobias -
How to find delete message from iphone
how to find delete message from iphone?
I am afraid that I don't think there is a way to do this.
-
How to find the Model size in Semantics
Hi All,
Please can you tell me how to find the model size in Semantics.
Thanks,
InduHi,
Instead of looking up the ID for the Entailment in DB_VIEWS you can better use MDSYS.SEM_NETWORK_INDEX_INFO
For example:
select name, type, id from MDSYS.SEM_NETWORK_INDEX_INFO;
NAME TYPE ID
MYMODEL MODEL 60
MYMODEL_INF ENTAILMENT 69
*** Space about the B-tree indexes on models and entailments ***
Indexes created in RDF_LINK$ for a specific model:
SQL> select name, type, id, index_name from MDSYS.SEM_NETWORK_INDEX_INFO;
NAME TYPE ID INDEX_NAME
MYMODEL MODEL 60 RDF_LNK_PCSGM_IDX
FAMILY100 MODEL 59 RDF_LNK_PSCGM_IDX
FAMILY100 MODEL 59 RDF_LNK_PCSGM_IDX
FAMILY2 MODEL 56 RDF_LNK_PCSGM_IDX
FAMILY2 MODEL 56 RDF_LNK_PSCGM_IDX
FAMILY MODEL 57 RDF_LNK_PCSGM_IDX
FAMILY MODEL 57 RDF_LNK_PSCGM_IDX
OTHERMODEL MODEL 58 RDF_LNK_PSCGM_IDX
OTHERMODEL MODEL 58 RDF_LNK_PCSGM_IDX
0 NETWORK 0 RDF_LNK_PCSGM_IDX
0 NETWORK 0 RDF_LNK_PSCGM_IDX
MYMODEL_INF ENTAILMENT 69 RDF_LNK_PCSGM_IDX
MYMODEL_INF ENTAILMENT 69 RDF_LNK_PSCGM_IDX
Then get the size from DBA_SEGMENTS
select bytes/1024/1024 MB, partition_name from dba_segments where segment_name in ('RDF_LNK_PSCGM_IDX','RDF_LNK_PCSGM_IDX');
Specifically for our model 60 and Entailment 69:
select bytes/1024/1024 MB, partition_name from dba_segments where segment_name in ('RDF_LNK_PSCGM_IDX','RDF_LNK_PCSGM_IDX') and partition_name in ('MODEL_60','MODEL_69');
MB PARTITION_NAME
192 MODEL_60
192 MODEL_60
60.0625 MODEL_69
62.375 MODEL_69
You would add them all for the size of the indexes -
How to find server model from 11g OEM mgmt$ views
How to find server model from 11g OEM mgmt$ views
server model like Dell 710, DL380 G7 etc..,It is included in this query (run as user SYSMAN):
SELECT t.target_name AS host_name,
ecm_util.HOST_HOME_LIST (t.target_name, t.target_type) AS home_info,
hw.vendor_name AS Vendor,
hw.system_config AS System_Config,
hw.machine_architecture Architecture,
os.name AS os_name,
os.base_version os_base_version,
os.update_level os_update_level,
os.address_length_in_bits os_address_length_in_bits
FROM mgmt_targets t, mgmt_ecm_snapshot s, mgmt_hc_os_summary os, MGMT_HC_HARDWARE_MASTER hw
WHERE t.target_type = 'host'
AND t.target_name = s.target_name
AND s.snapshot_type = 'host_configuration'
AND s.target_type = 'host'
AND s.is_current = 'Y'
AND s.snapshot_guid = os.snapshot_guid
AND hw.snapshot_guid = s.snapshot_guid
ORDER by t.target_type
The asked info is available in the view MGMT_HC_HARDWARE_MASTER, column: SYSTEM_CONFIG
Eric -
How to find the date my iPhone 4s was manufactured
Hi, Please can anyone tell me how to find the date my iPhone 4s 64gb was manufactured. I have the serial and i-m-e numbers. For some reason my Insurance company want to know, all I wanted to do was add the phone to my all risks policy. Thanks in advance for any advice.
That's all you will get, there is no way to know the manufactured date only the warranty status from date of original sale and it is most unlikely your warranty is still "good" on an iPhone 4
-
How to find which authentication used to site collection and site using powershell
Hi,
How to find how-many web app, sitecollection, site used Windows authentication,claim authentication and classic, secure store authention , adfs authentication using powershell code in sharepoint 2013.
If sites are used adfs authentication how to find which email id used for that.
Thanks,Authentication is only defined at the Web Application level, and the only valid auth methods are Classic (Windows (Basic/NTLM/Kerberos)), Claims (Windows (Basic/NTLM/Kerberos)), FBA Claims, , SAML Claims (ADFS), and Anonymous.
You can find out what authentication scheme(s) are enabled via:
$wa = Get-SPWebApplication http://webApp1$wa.IisSettings["Default"] #replace with the zone name you're interested in
The output will look similar to this:
PS C:\Users\trevor> $wa.IisSettings["Default"]
AuthenticationMode : Forms
MembershipProvider : i
RoleManager : c
AllowAnonymous : False
EnableClientIntegration : True
ServerBindings : {Microsoft.SharePoint.Admini
stration.SPServerBinding}
SecureBindings : {}
UseWindowsIntegratedAuthentication : True
UseBasicAuthentication : False
DisableKerberos : True
ServerComment : SharePoint
Path : C:\inetpub\wwwroot\wss\Virtu
alDirectories\spwebapp180
PreferredInstanceId : 42768054
UseClaimsAuthentication : True
ClaimsAuthenticationRedirectionUrl :
UseFormsClaimsAuthenticationProvider : False
FormsClaimsAuthenticationProvider :
UseTrustedClaimsAuthenticationProvider : False
UseWindowsClaimsAuthenticationProvider : True
OnlyUseWindowsClaimsAuthenticationProvider : True
WindowsClaimsAuthenticationProvider : Microsoft.SharePoint.Adminis
tration.SPWindowsAuthenticat
ionProvider
ClaimsAuthenticationProviders : {Windows Authentication}
ClaimsProviders : {}
ClientObjectModelRequiresUseRemoteAPIsPermission : True
UpgradedPersistedProperties : {}
So on this Web Application in the Default Zone you can tell I have Windows Claims enabled, not using Kerberos (so using NTLM), and Trusted (SAML/ADFS) is not enabled, neither is Forms or Anonymous.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
How to find face time in iPhone 5 bought from Dubai
How to find face time in iPhone 5 bought from Dubai
Read the fine print at the bottom.
Some features may not be available for all countries or all areas. Click here to see complete list.
And the note for UAE on this page: http://support.apple.com/kb/ht1937
FaceTime is not available in this country. -
How to find which function module write the relevant idoctype?
Dear All,
how to find which function module write the relevant idoctype?Hi,
Generally the function modules of the idoc types are having a naming convention as IDOC_INPUT for inbound processing and IDOC_OUTPUT for outbound processing followed by the idoc type name
for example : For IDOC type ORDERS
the inbound function module will be IDOC_INPUT_ORDERS and for outbound IDOC_OUTPUT_ORDERSP
In this way you can find the function module for a particular IDOC
P.S: Hope this is what you have asked for
Regards
Sarves -
How to Find Which Programs running in my Domain Computers
How to Find Which Programs running in my Domain Computers.
In addition, there are other third tools you can use. Here is a script from the TechNet Scripting Gallery:
List All Installed Software
Returns a list of all software installed on a computer, whether or not by Windows Installer. This script reads installed applications from the registry. (See Richard Mueller's comment on how to output it to a CSV file)
http://gallery.technet.microsoft.com/scriptcenter/8035d5a9-dc92-436d-a60c-67d381da15a3/view/Discussions
Of course that's just running it against one computer. There's also a script in the above link (scroll to the bottom) that will find installed software of a list of computers in a network and also detect the defined forbidden installed software, and
another script that will uninstall that software remotely.
Overall however, if you want to do this network wide with much a much easier method (although more complex to setup), I agree with using SCCM or Spiceworks. There is also Altiris, and a number of other third party solutions that you can use.
Maybe if you can provide more specific information on the end result of the solution you are looking for, we can provide more specifics to help you.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.
Maybe you are looking for
-
Replication of BP Enhancement to ERP
HI All, My scenario is: I have created custom fields in CRM BP (BUT000) using AET. Now i need to replicate these fields in the ERP BP (BUT000) I have enhanced BP in ERP with EEWB and added my fields there. Now i want to know what steps i need to foll
-
Windows 7 x64 Syncing Never Completes. iTunes Crashes At The End
I have had my ipod touch 3g for half a year now. First I used to use it on 32bit Windows 7, but recently I upgraded my machine and run 64bit Windows 7. It has been running well for the past few months but all of a sudden I have been getting a lot of
-
Is it possible to change the letterboxing or pillarboxing colors in iMovie?
I haven't found a way to do this yet, is it possible?
-
My blackberry torch doesn't have the option to update or to check for available wireless updates. What do I do to solve this problem?
-
Since 2 days , when i try to open Safari , mail or App store , the screen came in go back to the ipad screen. i made the last update before that and work with ipad during 2 days before it begin....