How to find which objects were causing library cache latches?

Hi All,
An hour back we saw a lot of sessions waiting on "latch: library cache".
Below is the output of the ASH Report:
Top Event P1/P2/P3 Values
Event     % Event     P1 Value, P2 Value, P3 Value     % Activity     Parameter 1     Parameter 2     Parameter 3
latch: library cache     80.23     "13835058076921816712", "214", "0"     29.16     address     number     tries
          "13835058076921817352", "214", "0"     16.66
          "13835058076921817992", "214", "0"     8.69
latch: shared pool     7.00     "13835058055432026888", "213", "0"     5.93     address     number     tries
How do we find out the Address from this P1 Value?
Thanks in advance

If you want to find the object you are waiting on:
SELECT kglnaown "Owner", kglnaobj "Object"
FROM x$kglob
WHERE kglhdadr=<P1RAW from v$session_wait>

Similar Messages

How to find which SAP Standard Objects r been modified wit a transport requ

Hi All,
Will u plz help me knowing "How to find which SAP Standard Objects r been modified wit a transport request imported" in general.
Wt i mean is how and where can v check the differences or modified ones.
Thanks All in Advance,
Malti

Hi Malti,
I have replied to your question elsewhere
Regards,
Siddhesh

How to find which sql or process that is causing lots of swap space

Hello,
There is a lot of swap space going on constantly. The SGA is 18gigs and PGA is 2 gigs. The swap space is 19gigs. How to find which processes or sql statements that are using a lot of sga and paging? The database is 10.1.0.5. and the tool OEM 10g. Thank you in advance.

v$sort_usage or v$temp_segusage give temporary tablespace usage.
To get PGA memory by session, you could use insteadv$process.

How to find which datasource is using table JCDS?

How to find which datasource is using table JCDS?

Hi,
Please find the below link and identify whether will it meet your requirement or not ... If it meets your requirement then I can provide you more documents related to the same which we have in our project.   We were using the same for Plant Maintanance project...
For this report the required information is gathering from the different data sources from the ECC system. This report requires object status functional location attributes, Equipment attributes and some specific information apart from normal transaction data for an order.
u2022     Main feeding data sources for this report are 2LIS_17_ORDER and 2LIS_18_ORDER.
u2022     Requires the object status data (system status, number object status and un-number system status) is feeding from different DSO where the status data is staging with different data flow.
u2022     Requires the Order planned end date which is dependent on the operation planned completion date. so we are feeding this field from Operationu2019s DSO where the planned date is staging with different data flow.
u2022     Required characteristic data and attributes of the Functional location is getting from the master data .The 0FUNCT_LOC is updating by master data data sources
u2022     Required standard class of the functional location is updating from other DSO where the classification data is staging with the help of different data flow.
2LIS_17_ORDER and 2LIS_18_ORDER Data flow Details : No enhancement was done for these data sources .
Status Data Flow Details:
The status data is staged because ,this dat is required for the reports based on the Orders, Operations , Notifications, Functional Location and Equipment.
To load suitable data to different DSOs from the Status DSO we maintain the Filters for status profile and status at DTP level.
Required status change dates are deriving based on changed on date ,system status while loading from status DSO to Order DSO.
The system status ,Number object status and un- numberd object status are feeding from status DSO only.The status DSO is updating by u20180TE_OBJ_STATUS_HISTu2019.This Is based on the tables JCDS,JSTO and T000.
JCDS     MANDT     =     JSTO     MANDT
JCDS     OBJNR          =     JSTO     OBJNR
T000     MANDT     =     JCDS     MANDT
This DS has enhanced for the below two fields
1.     Order Number
2.     Operation/Activity Number
The Logic to populate the above two fileds is as below.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e4/1522bae6aa46b8802dca454e846d58/frameset.htm
regards
BVR

How to know which object is in which transport requeset

hi frnds
how to know which object is in which transport request

hi Preethi
try with transaction se01 then clic on the tools icon under the menu you will get a list of function.
then select search for object in transport request (maybe the text is a bit different) then enter information like for example R3TR OSOA and the name of a datasource. if you don't know the meaning of R3TR use the match code and use it also for objects you want to find infosource infoobject etc... don't forget to mark the flag select if your transport request is released or not and then execute you will get the list of all transport requests containing your search object.
hope this could help you
best regards
Boujema

How to find Info objects for particular filed??

Hi
I hav doubt Can anyone tel me???
My Query s <b>How to find Info objects for particular filed??</b>
For example i hav some table fileds, how to find Info objects for that fields??
Pls explain me detaily
Points wil be given for all answers.
Thanks
Senthil

Hi Senthil ,
You have your field description along with your Field right.
For example:MATNR - Material Number
Now take this description and go to your BW side Tcode:RSA1
1)Search in Modelling >> Infoobjects >> Material Number
Then you get few hits (matches) which have description matched.
For Example: 0material - Material Number
Check for the Length and type match.
You will understand once you get those hits as to which is related to yours.
2)Go to BI content and search in the infoobjects this has all active and inactive objects but this takes a little time (not much though).
3) You have meta data search / simple search also where you can search for the objects with field description as matching criteria.
Hope your doubt is cleared atleast to some extent.
Assign Points if helpful.
Thanks,
Priyanka

How to Find Business Objects for any Tranaction .

Hi Abapers,
How to find Business objects for any transcation..... and how to connect the Work flow to any Trancation so that for example any body changes the date of Birth ...... so that the work flow should trigger .
Thanks & Regards
Bhaskar Rao.M

Hi Bhaskar,
For finding business object,you can try transaction SWO4 and by checking the documentation in it you can find your required business object.
Another method is:
1) Go to Trx SWE4 and switch on the event trace.
2) Run your transaction which you want to use for triggering your workflow.
3) Run transaction SWEL and find your Business Object and related event in it.
For connnecting your WF to your transaction you have to create a start event in your WF in SWDD,where in you specify the Business Object and start event which you find using above method.
Eg.You want your WF to be triggered whenever you have an error in your idoc.For this your BO will be IDOCAPPL and your event will be (inputErrorOccurred).This you will give in header data in SWDD.
Neerja

How to find which model of iPhone 5 I am using? and is that GSM or CDMA?

How to find which model of iPhone 5 I am using? A1428 or A1429 ? Is there any short code you can dial in and check the model number ?
And which is GSM or CDMA out of this model.

If you purchased the phone in the US with an AT&T contract then you have the locked CDMA A1428 version of the iPhone 5.
At the moment and if the contract is a new contact, then you won't be able to get the phone unlocked at the moment and no, you won't be able to use it in your home country. You will also have LTE 4G compatibility issues too and your phone will only work on 3G and also you need to remember that iPhones are only covered by country specific warranty, so it is only covered in the US, so if you go home and then have a problem with your phone, you will have to come back to the US to get it repaired.
You need to approach AT&T about whether they will unlock your phone for you as they are the ONLY ones that can do it, but the answer to your question is no and if you had wanted to use your phone at home, then you should not have purchased it in the US. The best that you can hope for at the moment is to use it on international/roaming.
If you purchased your phone in the US, then it will be a CDMA phone. You don't have a GSM phone, but GSM phones are unlocked anyway and these are the ones that are selling in Canada and the UK.
If you have your phone on an AT&T contract then ultimately, AT&T are the only ones who can help you with any questions regarding unlocking and they are the only ones who can unlock it for you, noone else.

How to find which authentication used to site collection and site using powershell

Hi,
How to find how-many web app, sitecollection, site used Windows authentication,claim authentication and classic, secure store authention , adfs authentication using powershell code in sharepoint 2013.
If sites are used adfs authentication how to find which email id used for that.
Thanks,

Authentication is only defined at the Web Application level, and the only valid auth methods are Classic (Windows (Basic/NTLM/Kerberos)), Claims (Windows (Basic/NTLM/Kerberos)), FBA Claims, , SAML Claims (ADFS), and Anonymous.
You can find out what authentication scheme(s) are enabled via:
$wa = Get-SPWebApplication http://webApp1$wa.IisSettings["Default"] #replace with the zone name you're interested in
The output will look similar to this:
PS C:\Users\trevor> $wa.IisSettings["Default"]
AuthenticationMode : Forms
MembershipProvider : i
RoleManager : c
AllowAnonymous : False
EnableClientIntegration : True
ServerBindings : {Microsoft.SharePoint.Admini
stration.SPServerBinding}
SecureBindings : {}
UseWindowsIntegratedAuthentication : True
UseBasicAuthentication : False
DisableKerberos : True
ServerComment : SharePoint
Path : C:\inetpub\wwwroot\wss\Virtu
alDirectories\spwebapp180
PreferredInstanceId : 42768054
UseClaimsAuthentication : True
ClaimsAuthenticationRedirectionUrl :
UseFormsClaimsAuthenticationProvider : False
FormsClaimsAuthenticationProvider :
UseTrustedClaimsAuthenticationProvider : False
UseWindowsClaimsAuthenticationProvider : True
OnlyUseWindowsClaimsAuthenticationProvider : True
WindowsClaimsAuthenticationProvider : Microsoft.SharePoint.Adminis
tration.SPWindowsAuthenticat
ionProvider
ClaimsAuthenticationProviders : {Windows Authentication}
ClaimsProviders : {}
ClientObjectModelRequiresUseRemoteAPIsPermission : True
UpgradedPersistedProperties : {}
So on this Web Application in the Default Zone you can tell I have Windows Claims enabled, not using Kerberos (so using NTLM), and Trusted (SAML/ADFS) is not enabled, neither is Forms or Anonymous.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to find which function module write the relevant idoctype?

Dear All,
how to find which function module write the relevant idoctype?

Hi,
Generally the function modules of the idoc types are having a naming convention as IDOC_INPUT for inbound processing and IDOC_OUTPUT for outbound processing followed by the idoc type name
for example : For IDOC type ORDERS
the inbound function module will be IDOC_INPUT_ORDERS and for outbound IDOC_OUTPUT_ORDERSP
In this way you can find the function module for a particular IDOC
P.S: Hope this is what you have asked for
Regards
Sarves

How to Find Which Programs running in my Domain Computers

How to Find Which Programs running in my Domain Computers.

In addition, there are other third tools you can use. Here is a script from the TechNet Scripting Gallery:
List All Installed Software
Returns a list of all software installed on a computer, whether or not by Windows Installer. This script reads installed applications from the registry. (See Richard Mueller's comment on how to output it to a CSV file)
http://gallery.technet.microsoft.com/scriptcenter/8035d5a9-dc92-436d-a60c-67d381da15a3/view/Discussions
Of course that's just running it against one computer. There's also a script in the above link (scroll to the bottom) that will find installed software of a list of computers in a network and also detect the defined forbidden installed software, and
another script that will uninstall that software remotely.
Overall however, if you want to do this network wide with much a much easier method (although more complex to setup), I agree with using SCCM or Spiceworks. There is also Altiris, and a number of other third party solutions that you can use.
Maybe if you can provide more specific information on the end result of the solution you are looking for, we can provide more specifics to help you.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

How to find which datasource are using tables AFRU ,CAUFV and AUFM

*how to find which datasource are using tables AFRU ,CAUFV and AUFM*

Hi,
You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
Hope this helps.....
Regards,
SUman

How to find which query taking more cpu

Hi,
How to find which query taking more CPU
at a particular point of time .
Chhers,

Take a look at Server Standard Reports. It has a few CPU usage oriented reports.
You can also track CPU usage by server-side tracing:
http://www.sqlusa.com/bestpractices/createtrace/
Glenn Berry's CPU usage query:
SELECT TOP(25) p.name AS [SP Name], qs.total_worker_time AS [TotalWorkerTime],
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], qs.execution_count,
ISNULL(qs.execution_count/DATEDIFF(Second, qs.cached_time, GETDATE()), 0) AS [Calls/Second],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count
AS [avg_elapsed_time], qs.cached_time
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
LINK:
http://dba.stackexchange.com/questions/52216/sql-server-2008-high-cpu-historical-queries
Query optimization:
http://www.sqlusa.com/articles/query-optimization/
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

How to find which transparent tables compose cluster tableuFF1AKONV

How to find which transparent tables compose cluster table：KONV

Hi,
Welcome to SDN.
Try doing this ....
1). Goto se12 and display the table BSEG
2). Click on the Delivery & Maintenanace tab
3). Double click on the Pool/Cluster field
4). On the next screen do a where used list
You will find all the related tables.
Regards,
Amit
Reward all helpful replies.

HR how to find which personal area belongs to which country

HR
how to find which personal area belongs to which country
thank you,
Regards,
Jagrut Bharatkumar shukla

Hi,
You can use the table T001P for finding that for eg.,
<b>Select molga from t001p where werks = 'Your Personnel area code'.</b>
Thanks
Yogesh

How to find which objects were causing library cache latches?

Similar Messages

Maybe you are looking for