How to find which Query is using program AQ10MM==========Z6============

Hi,
I wanted to know how to find out which SAP query uses this program. AQ10MM==========Z6============
I tried with SQ01/02 but was unable to get it. Can you please help.
Regards,
Mukund S

In my installation , it is usually AQZZ"usergroup"========QUERYNAME======
You could see if you have a user group 'MM' or '10MM' in SQ03 and set the user group if available.. then in SQ01, see if you have a query called Z6
Also try out this function module RSAQ_DECODE_REPORT_NAME to see if it would give you the user group and query name...

Similar Messages

How to find out query name using Elements of the query builder.

Hi SDNers,
how to find out query name using Elements of the query .
thanks,
satyaa

Hi,
For having a look at the relation between BEx tables,check the link below:
http://wiki.sdn.sap.com/wiki/display/BI/ExploretherelationbetweenBEx+Tables
-Vikram

How to find the query name using infoset name

Hi Experts
       Iam new to the sap queries(SQ01,SQ02), some queries already created.
      now i want to do some modification, my problem is i am not able to find the query name.
      I know the infoset name, can you tell me how to find the query name using the infoset name, is ther any table for this.
i tried in sq01 also, but its confusion, pls advice me on this.
thanks in advance.
regards
rajaram

Hi
try like this..
SQ02 --> go to --> Query Directory..
from there you can get all the queries belong to a Infoset.

How to find which datasource are using tables AFRU ,CAUFV and AUFM

*how to find which datasource are using tables AFRU ,CAUFV and AUFM*

Hi,
You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
Hope this helps.....
Regards,
SUman

How to find which query taking more cpu

Hi,
How to find which query taking more CPU
at a particular point of time .
Chhers,

Take a look at Server Standard Reports. It has a few CPU usage oriented reports.
You can also track CPU usage by server-side tracing:
http://www.sqlusa.com/bestpractices/createtrace/
Glenn Berry's CPU usage query:
SELECT TOP(25) p.name AS [SP Name], qs.total_worker_time AS [TotalWorkerTime],
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], qs.execution_count,
ISNULL(qs.execution_count/DATEDIFF(Second, qs.cached_time, GETDATE()), 0) AS [Calls/Second],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count
AS [avg_elapsed_time], qs.cached_time
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
LINK:
http://dba.stackexchange.com/questions/52216/sql-server-2008-high-cpu-historical-queries
Query optimization:
http://www.sqlusa.com/articles/query-optimization/
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

How to find which datasource is using table JCDS?

How to find which datasource is using table JCDS?

Hi,
Please find the below link and identify whether will it meet your requirement or not ... If it meets your requirement then I can provide you more documents related to the same which we have in our project.   We were using the same for Plant Maintanance project...
For this report the required information is gathering from the different data sources from the ECC system. This report requires object status functional location attributes, Equipment attributes and some specific information apart from normal transaction data for an order.
u2022     Main feeding data sources for this report are 2LIS_17_ORDER and 2LIS_18_ORDER.
u2022     Requires the object status data (system status, number object status and un-number system status) is feeding from different DSO where the status data is staging with different data flow.
u2022     Requires the Order planned end date which is dependent on the operation planned completion date. so we are feeding this field from Operationu2019s DSO where the planned date is staging with different data flow.
u2022     Required characteristic data and attributes of the Functional location is getting from the master data .The 0FUNCT_LOC is updating by master data data sources
u2022     Required standard class of the functional location is updating from other DSO where the classification data is staging with the help of different data flow.
2LIS_17_ORDER and 2LIS_18_ORDER Data flow Details : No enhancement was done for these data sources .
Status Data Flow Details:
The status data is staged because ,this dat is required for the reports based on the Orders, Operations , Notifications, Functional Location and Equipment.
To load suitable data to different DSOs from the Status DSO we maintain the Filters for status profile and status at DTP level.
Required status change dates are deriving based on changed on date ,system status while loading from status DSO to Order DSO.
The system status ,Number object status and un- numberd object status are feeding from status DSO only.The status DSO is updating by u20180TE_OBJ_STATUS_HISTu2019.This Is based on the tables JCDS,JSTO and T000.
JCDS     MANDT     =     JSTO     MANDT
JCDS     OBJNR          =     JSTO     OBJNR
T000     MANDT     =     JCDS     MANDT
This DS has enhanced for the below two fields
1.     Order Number
2.     Operation/Activity Number
The Logic to populate the above two fileds is as below.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e4/1522bae6aa46b8802dca454e846d58/frameset.htm
regards
BVR

How to find which query need to tuned

Hi ,
How can i find , which query need to tuned . Is there any mechanism behind it?

The mechanisms behind it are depending on your database version.
For example:
Oracle 9i has STATSPACK that helps you to identify possible problem queries.
Oracle 10g has AWR - Automatic Workload Repository
Oracle 11g has SPA - Database Replay SQL Performance Analyzer
but there are many more tools/mechanisms...trace/tkprof for example.
Go to http://tahiti.oracle.com and do a search on 'performance tuning guide', and pick the one that matches your (sofar unknown) database version, read a bit every now and then and see what tools are at your disposal and fit your requirement and situation.
Besides the links that Blu already posted, searches on http://asktom.oracle.com also give lots of pointers and explanations regarding the (neverending) tuning process (at least: helped me tremendously in understanding the tuning process, the do's and dont's).
Make sure you don't get CTD (Compulsive Tuning Disorder) from all this... ;)

How to find which query ORA-1652: unable to extend temp segment by 128 in

How can i find which query caused the below error,the query is not running currently
ORACLE ERRORS IN ALERTS LOG dnb2stg3 - lnx300 on Thu Jun 17 12:10:01 EDT 2010
1 ORA-1652: unable to extend temp segment by 128 in tablespace TEMP_SCHED
SQL> select inst_id, tablespace_name, total_blocks, used_blocks, free_blocks from gv$sort_segment;
INST_ID TABLESPACE_NAME TOTAL_BLOCKS USED_BLOCKS FREE_BLOCKS
1 TEMP 638336 0 638336
4 TEMP 565760 0 565760
4 TEMP_SCHED 16776704 0 16776704
3 TEMP 484864 0 484864
3 TEMP_SCHED 0 0 0
2 TEMP 455808 0 455808
6 rows selected.
SQL> SQL> SELECT S.sid || ',' || S.serial# sid_serial, S.username,
2 T.blocks * TBS.block_size / 1024 / 1024 mb_used, T.tablespace,
3 T.sqladdr address, Q.hash_value, Q.sql_text
FROM v$sort_usage T, gv$session S, gv$sqlarea Q, dba_tablespaces TBS
4 5 WHERE T.session_addr = S.saddr
6 AND T.sqladdr = Q.address (+)
7 AND T.tablespace = TBS.tablespace_name
8 ORDER BY S.sid;
no rows selected

Hello,
You may try to catch the SQL with a Servererror Trigger.
This link will give you an interesting example:
http://oratips-ddf.blogspot.com/2008/09/to-err-is-human.html
Hope this help.
Best regards,
Jean-Valentin

How to find out Query last used by whom

Dear All,
Can any one tell me that "How to find out the Query last used by whom. I have already searched in SDN but no luck. In my system BW Stats are not installed and I have already checked the below tables.
RSZELTDIR - Directory of the reporting component elements
RSZELTTXT - Texts of reporting component elements
RSZELTXREF - Directory of query element references
RSRREPDIR - Directory of all reports (Query GENUNIID)
RSZCOMPDIR - Directory of reporting components
RSZRANGE - Selection specification for an element
RSZSELECT - Selection properties of an element
RSZELTDIR - Directory of the reporting component elements
RSZCOMPIC - Assignment reuseable component <-> InfoCube
RSZELTPRIO - Priorities with element collisions
RSZELTPROP - Element properties (settings)
RSZELTATTR - Attribute selection per dimension element
RSZCALC - Definition of a formula element
RSZCEL - Query Designer: Directory of Cells
RSZGLOBV - Global Variables in Reporting
RSZCHANGES Change history of reporting components
I am able to find out the Date and time but not the user name. So could you please help on this.
Regards
Sankar

i think u have missed it.
RSZCOMPDIR IS THE ONLY TABLE WHICH PROVIDES THE DATA.
ENTER TECHNICAL QUERY Name in RSZCOMPDIR-COMPID.
RSZCOMPDIR-TSTNAM gives you the user id of sap bw user who made the change.
RSZCOMPDIR-TSTPDAT gives you date on which change was made .
RSZCOMPDIR-TSTPTIM gives you timestamp on which change was made .
all users details can be obtained from TCODE SU01 where you need to enter sap user id.
You can also get user name( description) by using tcode SE09 and entering above sap user id.

How to find which users has used external scripting

I want to find out the users who used the scripting for doing any mass changes activity.

Hi Murphy;
Please check which user has which forms open? and Re: how to determine which forms are currently open?
Hope it helps you in your issue
Regard
Helios

How to find which user is using the index?

Hi All,
I have an index named 'CTXT_ITEM_CODE' . The Index _type is Domain. When i try to drop this index its telling ORA-00054: resource busy and acquire with NOWAIT specified error
now i need to find out which session is using this index, so that i can kill it and drop the index.
Thanks

SELECT c.owner,
       c.object_name,
       c.object_type,
       b.SID,
       b.serial#,
       b.status,
       b.osuser,
       b.machine
FROM v$locked_object a, v$session b, dba_objects c
WHERE b.SID = a.session_id AND a.object_id = c.object_id
AND c.object_name='CTXT_ITEM_CODE';
ALTER SYSTEM KILL SESSION '<sid, serial#>'

How to get which query is using by reports using OEM

Hi,
can any one help me how to get the queries whcih are used by reports by clent by using OEM. Its same like using profiler in sql server
Thanks in advance
Edited by: user8884944 on Nov 6, 2010 2:18 AM

In my installation , it is usually AQZZ"usergroup"========QUERYNAME======
You could see if you have a user group 'MM' or '10MM' in SQ03 and set the user group if available.. then in SQ01, see if you have a query called Z6
Also try out this function module RSAQ_DECODE_REPORT_NAME to see if it would give you the user group and query name...

How to find which queries is using which indexes

So, I have a db 11gr2 and many indexes. Since I would like to delete some of them, I could see which indexes are unused, but I would like to see if some of indexes are used ony by one or two queries...
how could I found that?

If you have license for AWR views, use the below sql to identify indexes used.
This script has following bind variable
a1: owner
a and b: begin and end of snapshot
a2: tablespace name where your index exists
As suggested in this thread, do not plan to drop Foriegn key indexes if they are not listed.
col object_name for a30
col tablespace_anme fora 12
col count for 9999
col operation for a35
col options for a25
set lines 160
select c.*, d.tablespace_name
from (select
a.object_name ,
a.operation ,
a.options ,
count(1)
from
dba_hist_sql_plan a,
dba_hist_sqlstat b
where
a.object_owner ='&a1'
and
a.operation like '%INDEX%'
and
a.sql_id = b.sql_id
and b.snap_id between &a and &b
group by
a.object_name,
a.operation,
a.options
order by
4 desc) c,
dba_segments d
where c.object_name=d.segment_name
and d.tablespace_name='&a2'

How to find which authentication used to site collection and site using powershell

Hi,
How to find how-many web app, sitecollection, site used Windows authentication,claim authentication and classic, secure store authention , adfs authentication using powershell code in sharepoint 2013.
If sites are used adfs authentication how to find which email id used for that.
Thanks,

Authentication is only defined at the Web Application level, and the only valid auth methods are Classic (Windows (Basic/NTLM/Kerberos)), Claims (Windows (Basic/NTLM/Kerberos)), FBA Claims, , SAML Claims (ADFS), and Anonymous.
You can find out what authentication scheme(s) are enabled via:
$wa = Get-SPWebApplication http://webApp1$wa.IisSettings["Default"] #replace with the zone name you're interested in
The output will look similar to this:
PS C:\Users\trevor> $wa.IisSettings["Default"]
AuthenticationMode : Forms
MembershipProvider : i
RoleManager : c
AllowAnonymous : False
EnableClientIntegration : True
ServerBindings : {Microsoft.SharePoint.Admini
stration.SPServerBinding}
SecureBindings : {}
UseWindowsIntegratedAuthentication : True
UseBasicAuthentication : False
DisableKerberos : True
ServerComment : SharePoint
Path : C:\inetpub\wwwroot\wss\Virtu
alDirectories\spwebapp180
PreferredInstanceId : 42768054
UseClaimsAuthentication : True
ClaimsAuthenticationRedirectionUrl :
UseFormsClaimsAuthenticationProvider : False
FormsClaimsAuthenticationProvider :
UseTrustedClaimsAuthenticationProvider : False
UseWindowsClaimsAuthenticationProvider : True
OnlyUseWindowsClaimsAuthenticationProvider : True
WindowsClaimsAuthenticationProvider : Microsoft.SharePoint.Adminis
tration.SPWindowsAuthenticat
ionProvider
ClaimsAuthenticationProviders : {Windows Authentication}
ClaimsProviders : {}
ClientObjectModelRequiresUseRemoteAPIsPermission : True
UpgradedPersistedProperties : {}
So on this Web Application in the Default Zone you can tell I have Windows Claims enabled, not using Kerberos (so using NTLM), and Trusted (SAML/ADFS) is not enabled, neither is Forms or Anonymous.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to Find Which Programs running in my Domain Computers

How to Find Which Programs running in my Domain Computers.

In addition, there are other third tools you can use. Here is a script from the TechNet Scripting Gallery:
List All Installed Software
Returns a list of all software installed on a computer, whether or not by Windows Installer. This script reads installed applications from the registry. (See Richard Mueller's comment on how to output it to a CSV file)
http://gallery.technet.microsoft.com/scriptcenter/8035d5a9-dc92-436d-a60c-67d381da15a3/view/Discussions
Of course that's just running it against one computer. There's also a script in the above link (scroll to the bottom) that will find installed software of a list of computers in a network and also detect the defined forbidden installed software, and
another script that will uninstall that software remotely.
Overall however, if you want to do this network wide with much a much easier method (although more complex to setup), I agree with using SCCM or Spiceworks. There is also Altiris, and a number of other third party solutions that you can use.
Maybe if you can provide more specific information on the end result of the solution you are looking for, we can provide more specifics to help you.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

How to find which Query is using program AQ10MM==========Z6============

Similar Messages

Maybe you are looking for