How to find which Restricted Key Figures are using a specific hierararchy??

HI Experts,
  I am updating a very important hierarchy which is used in many queries and in many Restricted key figures. Is it possible to find in which Restricted Key Figures this specific hierarchy is used??
Thanks in advance.
Meyling.

Hi
I was able to find a solution
I built a new dataset in report builder using the same table as before but tried out the "Group and Aggregate" function and for the case_ship
field I chose "Sum" as my aggregate.... In essence this gave me a very cool and easy daliy sum of the shipped cases. 
When I used this new dataset and built my matrix report I was able to easily get the max daily shipment for each product by week, month and
year.
Tom

Similar Messages

  • How to find if one key figure is used in any report

    Dear Experts ,
    I have one key figure info object .I wanted to know how to find this key figure is used in which report .
    As I know "where used list " but this will not help me .
    Any suggestions please share .
    Puru

    Hi Puru,
    Try following approach,
    goto RSZELTTXT table and put your key figure name in the long text and click on execute. Get the list of all the ETULID's and go to table RSZCOMPDIR from this table for all the ETLUID's get all the list of COMPUID's and from COMPUID's you will be able to find all the reports from RSRREPDIR in which that key figure is getting used.
    Regards,
    Durgesh.

  • How to Create a Restricted Key Figure in BO Webi Report

    Hi Experts,
    Please tell me How to Create a Restricted Key Figure in BO Webi Report.
    Thanks in Advance.
    Regards,
    Rafi

    Hi,
    1. Define a new measure in the designer.
    2. In the select clause give the reference to the key figure on which restriction to be applied.
    For example
    @Select(Key Figures\Number of Records)
    3. In the where clause, give the MDX expression for the filter to be applied.
    For example
    <FILTER KEY="[0PURCH_ORG].[LEVEL01]">
    <CONDITION OPERATORCONDITION="InList">
    <CONSTANT CAPTION="HAS"/>
    </CONDITION>
    </FILTER>
    Regards

  • How to create Calculated/Restricted Key Figures in AO

    All,
    In our project we are consuming Bex Queries for AO Analysis. In these  we have lot of calculated/restricted key figures. In bex we can restrict 2 characterstics to one Keyfigure, So can we able to create calculated/restricted KF in AO
    Regards,
    John

    Hello Tammy,
    We are having a reqauirement in which we have 5 Bex queries built on the same infoporvider and we are trying to consolidate all the 5 queries to one single generic Bex query or two. So in AO we would like to consume this query and build different AO workbooks to meet all the old 5 queries requirement.
    So as part of this process, I would like to know can we create calculate/restricted KF's in AO , that way i can make a better decision to create them in Bex VS AO.
    Thanks for your inputs in advance.
    Regards,
    John
    Message was edited by: sunny johnson

  • How To Transport a Restricted Key Figures

    Dear all,
    can u plz tell me how to transport Restricted key figures for the first time.
    i mean shall i create new package or shall i use the existing package only?
    Regards
    venu

    Dear Venkat,
    In qaulity the sales value for a week is showing correctly where as in the production the sales value is showing only for one material that to in the -ve...we have so many materials....
    When i open a Query Designer in quality the system is giving a status message
    <b>[E865(RSO)]ERRORS: System is not set to Changeable - objects are not changeable</b>
    [<i>b]When i click the documetaion on the error message the following is appearing:</b></i>
    Errors: System is not set to changeable - objects are not changeable [E865(RSO)]
    Diagnosis
    You want to change objects although the system setting is "Not Changeable".
    System Response
    The objects cannot be changed.
    Procedure
    Change the setting for the system or client to "changeable". You can do this using transaction SE06 or SCC4.
    Venu

  • How to delete a restricted key figure in a multiprovider

    Hi all
    I used transaction RSZC (for the first time) to copy over restricted key figures from and info provider to a multi provider.
    This worked but somehow it copied over each restricted key figure twice.
    I have right clicked on the ones I don't want and clicked on delete but it doesn't delete them.
    any ideas ?
    thanks in advance

    Thanks to you all for your help
    It was my fault, I had them in structures that I'd copied over so that's why it wouldn't let me delete them.
    I found this out when I used RSZDELETE, thanks for that
    Sandra

  • How to find the basic key figure for a calculate key figure?

    Hi,
    We know one Calculated Key figure available in a query for a Info Provider. How can we find the Key figure which has been used for that CKF or from the Calculated key figure? Please help.
    Advance Thanks,

    Hi,
    1. To check the definition of the CKF you need to go to the query designer.
    2. Once into the query desiger switch on the technical names in the query. THis option is available in the Icons displayed on the top of query designer
    3. Then right click on the CKF and click display. You will find the necessary details.
    4. If you are not able to see the definition of the CKF, then you may need to go in the change mode and then . Try this in development environment.
    Regards,
    Adarsh

  • How can we see restricted key figures in Portal

    Hello,
    We are using 0ANALYSIS_PATTERM template, when we use the "new analysis" and from the drop down at the top (view, query, infoprovider) when we choose the infoprovider as a cube for example (0PU_C02) we can see pretty much like a web version of query designer i guess, we can see all the objects. But is there any way the end user can see the restrcited key figures that are created in the query designer by BW developer, so that they can drag and drop their objects and create a report.
    It would be great to have this function.
    Thanks,
    Kiran

    Currently, this is not available. You could have a query that has all RKF as a starting point to achieve this. If you think this would be good to have by default, please log a development request on the OSS Messaging System.

  • How to find which SAP R3 table are read during SAP R3 extractor execution ?

    Hi Colleagues,
    I would like to know which sap r3 table are read during the execution of a sap r3 extractor ?
    1. I execute 2lis_03_bf extractor
    2- I select debug mode
    3. I put a break-point statement at abap command : select
    I just see the program going to technical table, mara table and user exit from.
    I am sure that this extractor read also MBEW table but I did not found it during the execution of the debug mode.
    Can someone help me ? What should I do to see from which table the extractor 2lis_03_bf extractor is retrieving data ?
    Thanks !

    HI Hanson,
    You maynot directly hit the source table when you debug a LO Extractor, as you should be aware that the data
    is read as below in case of a LO datasources ,
    INIT or FULL load --> from Setup tables
    Delta                    --> from the delta queue
    Also finding the Source table fora LO extractor is simple as you check the EC pool and understand that , check the
    below blog for more details
    /people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
    But you can try with any other BI content extractor, for examle if you take a 0FI_AP_4
    you find the table BSIK and BSAK are being read using FM
    Regards,
    Sathya

  • How to find all oaf pages that are using a table in their VOs

    Hello everyone,
    I need to findout all the View Objects and Entity Objects that are using a table lets say A. Is there a smart way to find out all the VOs and EO's that are using my table?
    Thanks
    Sunny

    Technically there would be only one EO for your table (if its Oracle code). VOs contain queries and there might be many which refer the table.
    One option I can think of is doing a table name search in the various (EO and VO) directories on JAVATOP. Its the XML (99% cases) that would have the queries. Rest 1% having dynamic VOs, it would be difficult to determine.
    Regards

  • How to find which table is not being used ?

    Hi,
    I am in need of releasing space from the common schema we have. i have been permitted to drop the tables which has not been used for the last three months.
    Can anyone please suggest how to find the tables that has not been used for a given amount of time.
    Thanks and Regards.
    Rajib

    i have been permitted to drop the tables which has not been used for the last three months.Can I just chip in an observation on this premise? It's not unusual for systems to have processes that run quarterly or even annually. You need to be very careful about dropping "unused" tables - you might just kill your organisations end of year reporting system.
    Is buying more disk space really not an option?
    Cheers, APC

  • How to find out where movie clips are used?

    When I look at FLA project tree, I see Use Count column next to a movie clip. How do I find where this movie clip is used?

    Hi,
    You can use Edit > Find and Replace panel and set Symbols to Search
    Hope this Helps
    Thanks!
    Mohan

  • How to find user details o who are using bw reports

    Hi BW Experts,
    I want to know the details of users who are using bw reports.Your help is greatly appreciated.
    Thanks & Regards
    Pakki

    Hi,
        You can see it BW statistical reports. Once check 0BWTC* (3.5)  or 0TCT* (7.0) cubes are availble in your system or not ?
    Please check these links.
    http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5401ab90-0201-0010-b394-99ffdb15235b
    Or else you can only get this information if the query/ workbook is enabled for statistics logging in transaction RSDDSTAT.
    If it is enabled you can goto table RSDDSTAT ( 3.5) or RSDDSTAT_OLAP( 7.0 ) to see the users who executed the query . These tables store all the information per query session and you will find more than one rows per session but you can find the information you want i.e. users executing a particular query.
    Also Tcode: SU01 will give you all the user lists in the server.
    Regards
    Pcrao.

  • How to find which Oralce BI server is used by Presentation service

    Hi,
    I want to know which Oracle BI sever is used by oracle Presentaion service.Wher are the entries for Oracle Bi server?
    Please help as i am new to OBIEE.
    Thanks,
    MT
    Edited by: user13450806 on Jul 17, 2012 5:09 AM
    Edited by: user13450806 on Jul 17, 2012 5:09 AM

    Using the tag
    <DSN>AnalyticsWeb</DSN>
    from instanceconfig.xml
    AnalyticsWeb is the ODBC DSN.
    Pls mark correct or helpful if helps

  • How do you find which model iPhone you are using?

    Help me find on the iphone what model it is

    You already posted this question and it was answered here.

Maybe you are looking for

  • Need information for file type conversion from Oracle

    Hi, I need a scenario where there is third party tool which supports file types (.lnb (Link Notebook Chart),.anb(Analyst Notebook Analytical Chart),.anx(Analyst Notebook Exchange Chart),.tcv(Text Chart Visualisation)) I am having a Oracle database wh

  • SAPScript box drawing

    Hi Guys, I'm facing difficulties on drawing a box with records in SAPScript. Im using below for box drawing: 1. Draw main box /: BOX WIDTH 280 MM HEIGHT 130 MM FRAME 10 TW  2. Draw vertical line to separate each different COLUMN /: BOX XPOS 15 CH WID

  • Registered Trademark Symbol will not render in Outlook 2010.

    I am designing an HTML email with a product name that has a registered trademark symbol: ®. I have tried 3 different methods to get this symbol to render in Outlook 2010. Option + "R" to create the symbol, using ® and &#174. They all render with one

  • ESata internal connectors

    Hey guys, I've been having some problems with my firewire lately. I use all firewire and my computer keeps getting kernel panics 5 times a day. For work I just got some drives that came with a eSata extender with the ability to connect on my mother b

  • Problem with calling reports

    Dear All, using forms and reports 6i I have two reports in a form called by when_button_pressed of a button. I added the report files including path to the report node in object navigator and everything was okay. Next step for me was to create the RE