How to find which SAP R3 table are read during SAP R3 extractor execution ?

Hi Colleagues,
I would like to know which sap r3 table are read during the execution of a sap r3 extractor ?
1. I execute 2lis_03_bf extractor
2- I select debug mode
3. I put a break-point statement at abap command : select
I just see the program going to technical table, mara table and user exit from.
I am sure that this extractor read also MBEW table but I did not found it during the execution of the debug mode.
Can someone help me ? What should I do to see from which table the extractor 2lis_03_bf extractor is retrieving data ?
Thanks !

HI Hanson,
You maynot directly hit the source table when you debug a LO Extractor, as you should be aware that the data
is read as below in case of a LO datasources ,
INIT or FULL load --> from Setup tables
Delta                    --> from the delta queue
Also finding the Source table fora LO extractor is simple as you check the EC pool and understand that , check the
below blog for more details
/people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
But you can try with any other BI content extractor, for examle if you take a 0FI_AP_4
you find the table BSIK and BSAK are being read using FM
Regards,
Sathya

Similar Messages

  • How to find underlying r/3 table for a field of an extractor?

    Guys,
    Could anyone give an idea of how to find the underlying table in r/3 for EKGRP (purchasing group) field of an extractor? Thanks.
    Regards, Ivan

    Hi Ivan,
    Please check the below help file for your query.
    http://help.sap.com/saphelp_sm32/helpdata/en/1d/f4383fdb800804e10000000a114084/content.htm
    Regards,
    Raghu

  • How to find which Restricted Key Figures are using a specific hierararchy??

    HI Experts,
      I am updating a very important hierarchy which is used in many queries and in many Restricted key figures. Is it possible to find in which Restricted Key Figures this specific hierarchy is used??
    Thanks in advance.
    Meyling.

    Hi
    I was able to find a solution
    I built a new dataset in report builder using the same table as before but tried out the "Group and Aggregate" function and for the case_ship
    field I chose "Sum" as my aggregate.... In essence this gave me a very cool and easy daliy sum of the shipped cases. 
    When I used this new dataset and built my matrix report I was able to easily get the max daily shipment for each product by week, month and
    year.
    Tom

  • How to find which datasource are using  tables AFRU ,CAUFV and AUFM

    *how to find which datasource are using  tables AFRU ,CAUFV and AUFM*

    Hi,
    You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
    Hope this helps.....
    Regards,
    SUman

  • How to find which datasource is using table JCDS?

    How to find which datasource is using table JCDS?

    Hi,
    Please find the below link and identify whether will it meet your requirement or not ... If it meets your requirement then I can provide you more documents related to the same which we have in our project.   We were using the same for Plant Maintanance project...
    For this report the required information is gathering from the different data sources from the ECC system. This report requires object status functional location attributes, Equipment attributes and some specific information apart from normal transaction data for an order.
    u2022     Main feeding data sources for this report are 2LIS_17_ORDER and 2LIS_18_ORDER.
    u2022     Requires the object status data (system status, number object status and un-number system status) is feeding from different DSO where the status data is staging with different data flow.
    u2022     Requires the Order planned end date which is dependent on the operation  planned completion date. so we are feeding this field from Operationu2019s DSO where the planned date is staging with different data flow.
    u2022     Required characteristic data and attributes of the Functional location  is getting from the master data .The 0FUNCT_LOC is updating by master data data sources
    u2022     Required standard class  of the functional location is updating from other DSO where the  classification  data is staging with the help of different data flow.
    2LIS_17_ORDER and 2LIS_18_ORDER Data flow Details : No enhancement was done for these data sources .
    Status Data Flow Details:
    The status data is staged because ,this dat is required for the reports based on the Orders, Operations , Notifications, Functional Location and Equipment.
    To load suitable data to different DSOs from the Status DSO we maintain the Filters for status profile and status at DTP level.
    Required status change dates  are deriving based on changed on date ,system status while loading from status DSO to Order DSO.
    The system status ,Number object status and un- numberd object status are feeding from status DSO only.The status DSO is updating by u20180TE_OBJ_STATUS_HISTu2019.This Is based on the tables JCDS,JSTO and T000.
    JCDS     MANDT     =     JSTO     MANDT
    JCDS     OBJNR          =     JSTO     OBJNR
    T000     MANDT     =     JCDS     MANDT
    This DS has enhanced for the below  two fields
    1.     Order Number
    2.     Operation/Activity Number
    The Logic to populate the above two fileds is as below.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e4/1522bae6aa46b8802dca454e846d58/frameset.htm
    regards
    BVR

  • How could I find which i-views/pages are being used

    Hello
    I am pritty new in portal area. I have to administrate an ESS/MSS portal during hollydays. I am trying to find everywhere the way.
    How could I find which i-views/pages are being used. Let say I can see which group I belong and which roles are behind.
    How could I know in which PCD folder they are taken into account (to e.g give permission to someone not in the group)

    HI,
    the user administration (UME) gives you the information about the user <-> group <-> role assignment.
    When you know the role, search in the PCS for it, open the role and you will see all the pages / iviews assigned to the role.
    SAP Help: Role Assignment: http://help.sap.com/saphelp_nw04s/helpdata/en/59/bf2287b3cb5e48af94f99929ad15b9/content.htm
    SAP Help: Content Administration: http://help.sap.com/saphelp_nw04s/helpdata/en/5a/0339000c0b11d7b84800047582c9f7/content.htm
    br,
    Tobias

  • HR   how to find which personal area belongs to which country

    HR
    how to find which personal area belongs to which country
    thank you,
    Regards,
    Jagrut Bharatkumar shukla

    Hi,
        You can use the table T001P for finding that  for eg.,
    <b>Select molga from t001p where werks = 'Your Personnel area code'.</b>
    Thanks
    Yogesh

  • How to find which transparent tables compose cluster tableuFF1AKONV

    How to find which transparent tables compose cluster table&#65306;KONV

    Hi,
    Welcome to SDN.
    Try doing this ....
    1). Goto se12 and display the table BSEG
    2). Click on the Delivery & Maintenanace tab
    3). Double click on the Pool/Cluster field
    4). On the next screen do a where used list
    You will find all the related tables.
    Regards,
    Amit
    Reward all helpful replies.

  • How to find which SAP Standard Objects r been modified wit a transport requ

    Hi All,
    Will u plz help me knowing  "How to find which SAP Standard Objects r been modified wit a transport request imported" in general.
    Wt i mean is how and where can v check the differences or modified ones.
    Thanks All in Advance,
    Malti

    Hi Malti,
    I have replied to your question elsewhere
    Regards,
    Siddhesh

  • How-To Find the R/3 Table Name for a BW Data Source

    Hi there,
      Please advice how can I find the respective table name in R/3 for a particular BW DataSource ?
      P/S : I would like a technical how-to instead of referring the table names at HELP.SAP.COM
      For instance, for my Standard Business Content Info Cube 0CCA_C03(CO-OM-CCA: Statistical Key Figures) which extracts from BW Data Source: 0CO_OM_CCA_4
      My question is, how can I find out which specific tables in SAP R/3 is this Data Source pulling the data from ?

    Hi Dinesh,
       Data Source: 0CO_OM_CCA_4
       1) In my R/3, I ran SE16 : Table -> ROOSOURCE
       2) OLTPSOURCE -> 0CO_OM_CCA_4
       3) EXMETHOD = F1
         (Hence, I assume the Extraction Method is a Function Module)
       4) So, Function Module = BWOM_RS_GET_CTRSTA
       5) Run SE37 in R/3
          How do I find out the specific tables in this Function Module ?
          Would you please list them for me, so I can further refer to the individual tables ?

  • How to Find out the all  tables in module wise ?

    Dear Friends,
    1.How to Find out the all  tables in module wise ?
       what are the total number of table in SAP ?
    2. how to find out all existing functions in SAP ?
    Thanks and regards,
    Subasha Chandra Sahoo.

    Hi,
    You will get the module wise list from:
    http://www.sourceveda.com/SAPReference.htm
    http://www.sourceveda.com/
    Regards...

  • How to find the CRM related Tables form a Particular DataSource

    Hi friends
               <b>How to find the CRM related Tables form a Particular DataSource
      of BusinessContent.</b>
      ex: i had taken CRM - DataSource ........ 0CRM_LEAD_H (Lead Header Data)
           for this DS i assign IS and extract data. But i want to Know from which
           CRM tables it was comming.
           ie ..I want to know the what tables linked to Datasource(0CRM_LEAD_H)
           How it has to check?

    Just for your info, you can find as useful (for a methodology to solve this kind of issue) this weblog:
    SAP BW and Business Content Datasources: in pursuit of the origins
    Hope it helps!
    Bye,
    Roberto

  • How to find the list of Tables....

    Hi
    How to find the list of Tables associated with When a Goods Issue is done for a Process Order ??
    Kindly tell me step-by-step procedure in browsing it.
    cheers
    MaruthiRam

    Hi
    goto SE16 Click F4, You have two options Information system & Sap Applications.
    Click on SAP Applications & selec the application you wnat to see, for E.g Purchasing you can click on materials managemnt, Purchasing if you drill down you will see the list of tables....
    reward points if useful
    Thanks & Regards
    Kiran

  • H how to find  if the psa table is included in psa deletion process chain

    Hi all
    can anybody tell me .
    I have a psa table it's technical name is /BIC/B*
    h how to find  the  above psa table is included in psa deletion process chain or not
    please help me

    Hi
    Ope the PC in RSPC1 -->go to planning view of process chain
    in left side you will find different types of process types.
    under other BW process types folder -->you will find process type "Delete request from PSA"
    drag this into your process chain planning view and customize it based on your requirements.
    check the below article for step by step procedure
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
    Regards,
    Venkatesh

  • How to find which model of iPhone 5 I am using? and is that GSM or CDMA?

    How to find which model of iPhone 5 I am using? A1428 or A1429 ? Is there any short code you can dial in and check the model number ?
    And which is GSM or CDMA out of this model.

    If you purchased the phone in the US with an AT&T contract then you have the locked CDMA A1428 version of the iPhone 5. 
    At the moment and if the contract is a new contact, then you won't be able to get the phone unlocked at the moment and no, you won't be able to use it in your home country.  You will also have LTE 4G compatibility issues too and your phone will only work on 3G and also you need to remember that iPhones are only covered by country specific warranty, so it is only covered in the US, so if you go home and then have a problem with your phone, you will have to come back to the US to get it repaired.
    You need to approach AT&T about whether they will unlock your phone for you as they are the ONLY ones that can do it, but the answer to your question is no and if you had wanted to use your phone at home, then you should not have purchased it in the US.  The best that you can hope for at the moment is to use it on international/roaming.
    If you purchased your phone in the US, then it will be a CDMA phone.  You don't have a GSM phone, but GSM phones are unlocked anyway and these are the ones that are selling in Canada and the UK.
    If you have your phone on an AT&T contract then ultimately, AT&T are the only ones who can help you with any questions regarding unlocking and they are the only ones who can unlock it for you, noone else.

Maybe you are looking for

  • How do I overwrite iCloud address book with local mac one?

    When I first got 10.7, I had turned on Google sync in address book. Every person with a prefix or suffix on their name ended up with lots of extra cards (where the suffix became the last name, etc). After migrating my MobileMe to iCloud, I cleaned th

  • 2G iPod Touch won't synch or charge with computer.

    I have a 2nd gen. iPod Touch and when i plug it into my computer it won't recognize it, charge it, or synch it. The only thing that happens when you plug it in is the computer makes 3 fast, same pitched tones. It's kind of like when you would normall

  • MC.1(also S032) has incorrect valuated stock value

    When I run the transaction MC.1 , for certain materials I get the value even if the stock qty is zero. I checked in Info structure S032 , even here it has the same value . Please advice & if possible detail steps of rectifying this. Material         

  • R12 Reports Customization

    We are preparing a release 12.0.6 environment for testing. How do you customize a R12 reports file? (For release 11i, I used the Oracle Reports Developer). So is it the same or different in R12? Thanks...Colin

  • Release reason for blocked sales orders (VKM1 & 3)

    We have a business requirement for a mandatory reason when sales orders are released in credit management in the same way that rejected orders have a reason code linked to them. Has anybody else done anything similar?