How to find which SAP Standard Objects r been modified wit a transport requ
Hi All,
Will u plz help me knowing "How to find which SAP Standard Objects r been modified wit a transport request imported" in general.
Wt i mean is how and where can v check the differences or modified ones.
Thanks All in Advance,
Malti
Hi Malti,
I have replied to your question elsewhere
Regards,
Siddhesh
Similar Messages
-
How to find the SAP Standard form given the variant name.
I am working on forms, How to find the standard form given
print program name or the variant name .
for eg:
given
print program is RKFORD10
varinat is SAP06
The SAP standard Form is F140_ACC_STAT_01.
I need to find the standard form given the variant as SAP13.In SPRO,
SAP Customizing Imp guide->Financial Accounting->Fin Account Global Settings->Correspondence
Under this-
'Assign Programs for Correspondence Types'(Tcode OB78) &
'Define Form names for correspondence print'
should be useful to you
Message was edited by: Sravanthi -
How to find which SAP R3 table are read during SAP R3 extractor execution ?
Hi Colleagues,
I would like to know which sap r3 table are read during the execution of a sap r3 extractor ?
1. I execute 2lis_03_bf extractor
2- I select debug mode
3. I put a break-point statement at abap command : select
I just see the program going to technical table, mara table and user exit from.
I am sure that this extractor read also MBEW table but I did not found it during the execution of the debug mode.
Can someone help me ? What should I do to see from which table the extractor 2lis_03_bf extractor is retrieving data ?
Thanks !HI Hanson,
You maynot directly hit the source table when you debug a LO Extractor, as you should be aware that the data
is read as below in case of a LO datasources ,
INIT or FULL load --> from Setup tables
Delta --> from the delta queue
Also finding the Source table fora LO extractor is simple as you check the EC pool and understand that , check the
below blog for more details
/people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
But you can try with any other BI content extractor, for examle if you take a 0FI_AP_4
you find the table BSIK and BSAK are being read using FM
Regards,
Sathya -
How to find out if an object is already saved in a transport request
Hi all,
Does anyone know a function module or a class using which I can find out if a development object(class. interface etc.) is already processed and saved in an open transport request in my system?
Thanks in advance
SükrüHi Sükrü
You can read the table E071 with the object id and get the transport request number. Use this transport request and read the table E070, the field "TRSTATUS" will give the status whether the object is locked or released.
Hope this helps !
Regards
Ranganath
PS : Reward points if found useful ! -
SAP standard objects that have been modified.
Hi,
Is there a way to find the SAP standard objects that is currently different from their original version?
Regards,
Tahar.There is a report for this in the transport organizer tools area. To get to this you can run SE09 and click the icon with the small hammer. Then run the report titled 'Display repaired objects'
Hope that helps.
J. Haynes -
Find out all SAP Standard Objects which are Modify
Hi
How can i find out all SAP Standard Objects which are Modify?
Regards
VikramHi,
You can find all SAP objects list via t-code SWO2, as to these objects, if you want to change anyone of them, you should apply an access key in advance from http://service.sap.com, otherwise you can not modify any object in SAP system.
Good luck
Z.T -
How to find which datasource is using table JCDS?
How to find which datasource is using table JCDS?
Hi,
Please find the below link and identify whether will it meet your requirement or not ... If it meets your requirement then I can provide you more documents related to the same which we have in our project. We were using the same for Plant Maintanance project...
For this report the required information is gathering from the different data sources from the ECC system. This report requires object status functional location attributes, Equipment attributes and some specific information apart from normal transaction data for an order.
u2022 Main feeding data sources for this report are 2LIS_17_ORDER and 2LIS_18_ORDER.
u2022 Requires the object status data (system status, number object status and un-number system status) is feeding from different DSO where the status data is staging with different data flow.
u2022 Requires the Order planned end date which is dependent on the operation planned completion date. so we are feeding this field from Operationu2019s DSO where the planned date is staging with different data flow.
u2022 Required characteristic data and attributes of the Functional location is getting from the master data .The 0FUNCT_LOC is updating by master data data sources
u2022 Required standard class of the functional location is updating from other DSO where the classification data is staging with the help of different data flow.
2LIS_17_ORDER and 2LIS_18_ORDER Data flow Details : No enhancement was done for these data sources .
Status Data Flow Details:
The status data is staged because ,this dat is required for the reports based on the Orders, Operations , Notifications, Functional Location and Equipment.
To load suitable data to different DSOs from the Status DSO we maintain the Filters for status profile and status at DTP level.
Required status change dates are deriving based on changed on date ,system status while loading from status DSO to Order DSO.
The system status ,Number object status and un- numberd object status are feeding from status DSO only.The status DSO is updating by u20180TE_OBJ_STATUS_HISTu2019.This Is based on the tables JCDS,JSTO and T000.
JCDS MANDT = JSTO MANDT
JCDS OBJNR = JSTO OBJNR
T000 MANDT = JCDS MANDT
This DS has enhanced for the below two fields
1. Order Number
2. Operation/Activity Number
The Logic to populate the above two fileds is as below.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e4/1522bae6aa46b8802dca454e846d58/frameset.htm
regards
BVR -
How to know which master data objects need to activated in R3
SALES OVERVIEW CUBE -0SD_C03
How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.
its very urgent please advise.
R/3 in RSA5
Sales Master Data
0ACCNT_ASGN_TEXT Account assignment group for this customer
0ACCNT_GRP_TEXT Customer account group
0BILBLK_DL_TEXT Locked
0BILBLK_ITM_TEXT Billing block for item
0BILL_BLOCK_TEXT Billing block in SD document
0BILL_CAT_TEXT Billing Category
0BILL_RELEV_TEXT Relevant for Billing
0BILL_RULE_TEXT Billing rule
0BILL_TYPE_TEXT Billing Type
0CONSUMER_ATTR Consumer
0CONSUMER_LKLS_HIER Consumer
0CONSUMER_TEXT Consumer
0CUST_CLASS_TEXT Customer Classification
0CUST_GROUP_TEXT Customer Group
0CUST_GRP1_TEXT Customer Group 1
0CUST_GRP2_TEXT Customer Group 2
0CUST_GRP3_TEXT Customer Group 3
0CUST_GRP4_TEXT Customer Group 4
0CUST_GRP5_TEXT Customer Group 5
0DEALTYPE_TEXT Sales Deal Type
0DEL_BLOCK_TEXT Delivery block (document header)
0DEL_TYPE_TEXT Delivery Type
0DISTR_CHAN_TEXT Distribution Channel
0DIVISION_TEXT Division
0DLV_BLOCK_TEXT Schedule line blocked for delivery
0DOC_CATEG_TEXT SD Document Category
0DOC_TYPE_TEXT Sales Document Type
0INCOTERMS_TEXT Incoterms (Part 1)
0INDUSTRY_TEXT Industry keys
0IND_CODE_3_TEXT Industry code 3
0IND_CODE_4_TEXT Industry code 4
0IND_CODE_5_TEXT Industry code 5
0IND_CODE_TEXT Industry code
0ITEM_CATEG_TEXT Sales document item category
0ITM_TYPE_TEXT FS item type
0KHERK_TEXT Condition Origin
0MATL_GRP_1_TEXT Material Group1
0MATL_GRP_2_TEXT Material Group 2
0MATL_GRP_3_TEXT Material Group 3
0MATL_GRP_4_TEXT Material Group 4
0MATL_GRP_5_TEXT Material Group 5
0MATL_TYPE_TEXT Material Type
0MAT_STGRP_TEXT Material statistics group
0NIELSEN_ID_TEXT Nielsen ID
0ORD_REASON_TEXT Order reason (reason for the business transaction)
0PICK_INDC_TEXT Indicator for picking control
0PRODCAT_TEXT Product Catalog Number
0PROD_HIER_TEXT Product Hierarchy
0PROMOTION_ATTR Promotion
0PROMOTION_TEXT Promotion
0PROMOTYPE_TEXT Promotion Type
0PROV_GROUP_TEXT Commission Group
0REASON_REJ_TEXT Reason for rejection of quotations and sales orders
0REBATE_GRP_TEXT Volume rebate group
0RECIPCNTRY_TEXT Destination country
0ROUTE_TEXT Route
0SALESDEAL_ATTR Sales deal
0SALESDEAL_TEXT Sales deal
0SALESORG_ATTR Sales organization
0SALESORG_TEXT Sales Organization
0SALES_DIST_TEXT Sales district
0SALES_GRP_TEXT Sales Group
0SALES_OFF_TEXT Sales Office
0SCHD_CATEG_TEXT Schedule line category
0SHIP_POINT_TEXT Shipping point/receiving point
In BW
Base Unit of Measure 0BASE_UOM
Bill-to party 0BILLTOPRTY
Calendar Day 0CALDAY
Calendar Year/Month 0CALMONTH
Calendar Year/Week 0CALWEEK
Change Run ID 0CHNGID
Company code 0COMP_CODE
Cost in statistics currency 0COST_VAL_S
Credit/debit posting (C/D) 0DEB_CRED
Distribution Channel 0DISTR_CHAN
Division 0DIVISION
Number of documents 0DOCUMENTS
Sales Document Category 0DOC_CATEG
Document category /Quotation/Order/Delivery/Invoice 0DOC_CLASS
Number of Document Items 0DOC_ITEMS
Fiscal year / period
Fiscal year variant 0FISCVARNT
Gross weight in kilograms 0GR_WT_KG
Number of Employees 0HDCNT_LAST
Material 0MATERIAL
Net value in statistics currency 0NET_VAL_S
Net weight in kilograms 0NT_WT_KG
Open orders quantity in base unit of measure 0OPORDQTYBM
Net value of open orders in statistics currency 0OPORDVALSC
Payer 0PAYER
Plant 0PLANT
Quantity in base units of measure 0QUANT_B
Record type 0RECORDTP
Request ID 0REQUID
Sales Employee 0SALESEMPLY
Sales Organization 0SALESORG
Sales group 0SALES_GRP
Sales Office 0SALES_OFF
Shipping point 0SHIP_POINT
Ship-To Party 0SHIP_TO
Sold-to party 0SOLD_TO
Statistics Currency 0STAT_CURR
In R3 RSA5 we have all the Master data data sources as mentioned above, and BW also. How to find the related Master data Infosource in R/3 Master data Data sources.
Thanks in advance,
Bhima.
Message was edited by: Bhima Chandra Sekhar GuntlaHi,
<i>How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.</i>
I think, you are looking for master data sources(text,attributes,hier).Am i right?
If so, This cube has almost all SD master data characterstics. So you can activate all the all master data datasources of SD in r/3 (SD-IO).
Any way you requirement does not stop only by using this cube . You will activate all other cubes in SD also. So if you want to activate only needed master data datasources when you are activating a cube, the job becomes senseless. There is no problem(wrong) in activating all master data available under that application , even though you want to activate only one cube.
With rgds,
Anil Kumar Sharma .P -
How to find out the standard smartforms?
how to find out the standard smartforms?
Hi Sunil
You just go to transaction <b>SE80</b>(Object Navigator)
and in that enter <b>Package BC470</b>
which contains the standard Programs on Smart forms ,
I think there you can find some Smart forms in those programs.
I hope it will help you.
If it helps reward with points.
Regards Rk -
How to find out the standard info stucture for a customized IS in LIS
Hi All
I have to run the statistical set up for the customized info structure S763 for the application plant maintenance in LIS. But i dont know whether it was copied from a standard SAP info structure or it was enhanced from a standard info structure.
I have even checked out all the standard IS for plant maintenance but it is not matching. The closest match is S063 but a few characteristics and a key figure is missing.
Could anybody guide me how to find out the standard info structure?
Any help would be of great help.
Regards
SaddyHi Ganesh
No..it didnt solve my problem. MC23 only displays the info structures. I have a customized info structure S763 which was created long time back. Im not sure whether it was copied from a standard info structure or enhanced from a standard info structure.
I have to give the source info structure name to run statistical set up. The closest one which matches with the S763 is S063 but it is missing few characteristics and key figure.
does it means that the IS S063 was enhanced?? Am i right?? If it was enhanced how will i run the statistical setup for the same...
I hope i have explained clearly.
Do provide ur valuable input.
Regards
Saddy -
SAP Standard objects:modified ones.
Dear all,
my client wants to have a report where in he can see all the modified SAP standard object so that he can analyse his effort for the next upgrade.
there is already a report existing which does this but not sure if the logic is correct.
It is getitng all the entires from table "ADIRACCESS" and displaying.
I understand i can look at the txn SPAU and SPDD but ofr reporting purpose i waould need to get the tables/ FM which gives me the lilst of objects
any pointers to that would be appreciated.
thanks in advance !Hi Dhruv,
As mentioned by Srinivas the ADIRACCESS table is where all access keys used within your system for modification to SAP standard code are stored and hence should be a good indication of what all / how many modifications to standard have taken place.
As to your doubts, append structures do not require access keys, since creating append strcutures is an enhancement to standard DDIC objects and only needs a transport since in actual, it only is creating a Z table structure.
Also, user exits and BAdis certainly dont require access keys. Again they are enhancement and not modifications and when upgrading they will NOT be overwritten. As SAP mentions, during upgrades all enhancements are retained within the system however modifications if not handled are overwritten.
Hope this helps in a way.
Best regards,
Aditya -
Hi Experts,
Pls. let me know that,
How to fetch the SAP Standard Prog. built internal table into my_z_prog.?
For more explannation, pls. see my other thread with name of yestrday,
SUBMIT RFGLBALANCE WITH selection criteria, then How to get resulted itab?
thanqHi
Suppose RFGLBALANCE is your standard program and you have an internal table named I_RFGLBALANCE.
And lets say your Z program name is Z_SRINIVAS.
First find out the type of the internal table you want in your Z-program in the standard program. And declare an internal table of similar type in your Z-program.
I hope you can do this much.
Later wherever you are putting the below mentioned code.
SUBMIT RFGLBALANCE WITH selection criteria
Write the code which i have written.Obviously modify it to suit your requirement.
Please show what is not working fine so that even anyone else can help you with the problem you are facing.
Regards,
Mayank -
How and where does SAP standard programs update the master tables...
Hello there,
How and where does SAP standard programs update the master tables...
to be precise.. if a (any) transaction occurs the programs behind it holds the data in temporary structures.
where and when does it get updated in the master table.
can anyone tell me how it happens?
I Know that from the where used list one can find the corresponding table but most of the time it wont suffice
I am expecting a proper answer.
Santosh BHello Santosh,
you need to do some self-reading on the following topic
Updates in the SAP System (BC-CST-UP)
http://help.sap.com/saphelp_47x200/helpdata/en/e5/de86e135cd11d3acb00000e83539c3/frameset.htm
Regards,
Siddhesh -
How to find datasource and standard cube for given R/3 table
Hi All,
Can anyone help me that how to find a datsource, standard cube and Standard BI reports for given R/3 table.
For example if am having the table names "EKKO (Header)
EKPO (Line item)
EKET (Schedule Lines)
EKBE (PO History)
EKKN (Account Assignment/WBS)
EKAN/EKPA (Partner Info)" for all these tables how can i find the standard datasource and standard Cube.
Please help in this. I will assign the points.
Regards,
Shanthihttps://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
MM
Data Sources Tables
Purchasing
2LIS_02_SCL EKKO, EKBE, T001, T001W, EKET, EKPA.
2LIS_02_HDR EKKO, EKBE, T001, EKPA.
2LIS_02_ITM EKKO, EKBE, T001, T001W, EKPO, TMCLVBW, T027C, ESSR, T147K, T147
2LIS_02_SCN EKET, EKES, EKPO.
2LIS_02_CGR EKBE, EKES, EKPO.
2LIS_02_SGR EKET, EKBE, KKPO
Inventory
2LIS_03_BX stock tables, MCHA, MARA, T001, T001W, CALCULATED FROM MBEW, EBEW, QBEW.
2LIS_03_BF MSEG, MBEW, MKPF.
2LIS_03_UM BKPF, MBEW, QBEW, EBEW, BSEG.
MM
Purchasing Datasources
ODS
0PUR_O01 2LIS_02_ITM, 2LIS_02_SGR, 2LIS_02_CGR, 2LIS_02_SCN.
0PUR_O02 2LIS_02_HDR, 0PUR_O01
0PUR_DS03 2LIS_02_SCL and 2LIS_02_SGR.
CUBE
0PUR_C10 2LIS_02_SCL and 2LIS_02_SGR.
0PUR_C07
0PUR_C08
0PUR_C09 0PUR_O02, 80PUR_O01, 2LIS_02_HDR
0SRV_C01 2LIS_02_S174
0PUR_C04 2LIS_02_S011, 2LIS_02_SCL, 2LIS_02_ITM, 2LIS_02_HDR
0PUR_C01 2LIS_02_S012, 2LIS_02_ITM, 2LIS_02_SCL
0PUR_C02 2LIS_02_S013
0PUR_C05 0MM_PUR_VE_01
0PUR_C06 0MM_PUR_VE_02
0PUR_C03 2LIS_02_S015
Inventory Management
CUBE
0IC_C03 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM
0IC_C02 2LIS_03_S195, 2LIS_03_S197
0IC_C01 2LIS_03_S196, 2LIS_03_S198
SD
Data sources Tables
2LIS_11_VAKON VBUK, VBUP, VBAK, VBAP, VBKD, KOMV, T001.
2LIS_11_VAHDR VBAK, VBUK, T001
2LIS_11_VAITM VBAP, VBUP, VBAK, VBKD, VBAJP, T001, VBUK, PRPS.
2LIS_11_VASCL VBAP, VBUP, VBAK, VBEP, VBKD, T001, PRPS
2LIS_11_VASTH VBUK
2LIS_11_VASTI VBUP, VBUK
2LIS_11_V_ITM VBAP, VBAK, VBKD, VBUP, T001, PRPS, VBUK.
2LIS_11_V_SCL VBUP, VBEP, VBKD, VBAP, VBAK, T001, PRPS.
2LIS_11_V_SSL VBAP, VBEP, LIPS, WVBEP, VBUP
2LIS_13_VDKON VBUK, VBRP, KOMV, T001, VBRK.
FI
DATASOURCES Tables
Cost Center Accounting
0CO_OM_CCA_1 COSP, COSS
0CO_OM_CCA_2 COSP, COSS
0CO_OM_CCA_3 COSL, COKL.
0CO_OM_CCA_4 COSR
0CO_OM_CCA_5 COSB
0CO_OM_CCA_6 COOMCO
0CO_OM_CCA_7 BPJA, BPPE.
0CO_OM_CCA_8 COST, TKA07,COOMCO, CSLA, COST, COKL.
0CO_OM_CCA_9 COVP (COEP& COBK), COSP, COST, COEJ, COEP, T001.
0CO_OM_CCA_10 COOI, COSP_VTYPE.
Product Cost Controlling
0CO_PC_PCP_01 KEKO, TCKH3, TCKH8.
0CO_PC_PCP_02 KEKO, TCKH3.
0CO_PC_PCP_03 CKIS, T001K, TKA02, KEKO, MARA, MBEW.
0CO_PC_PCP_04 CKIS, T001K, TKA02, KEKO, MBEW, MARA
0CO_PC_01 AUFK, AFPO, COSS, COSP, COSB, COSL, COKEY, TKA09, TKV09
0CO_PC_02 AUFK, AFPO, COSS, COSP, COSB, COSL, COKEY, TKA09, TKV09
Hope this Helps. -
How to find which query taking more cpu
Hi,
How to find which query taking more CPU
at a particular point of time .
Chhers,Take a look at Server Standard Reports. It has a few CPU usage oriented reports.
You can also track CPU usage by server-side tracing:
http://www.sqlusa.com/bestpractices/createtrace/
Glenn Berry's CPU usage query:
SELECT TOP(25) p.name AS [SP Name], qs.total_worker_time AS [TotalWorkerTime],
qs.total_worker_time/qs.execution_count AS [AvgWorkerTime], qs.execution_count,
ISNULL(qs.execution_count/DATEDIFF(Second, qs.cached_time, GETDATE()), 0) AS [Calls/Second],
qs.total_elapsed_time, qs.total_elapsed_time/qs.execution_count
AS [avg_elapsed_time], qs.cached_time
FROM sys.procedures AS p WITH (NOLOCK)
INNER JOIN sys.dm_exec_procedure_stats AS qs WITH (NOLOCK)
ON p.[object_id] = qs.[object_id]
WHERE qs.database_id = DB_ID()
ORDER BY qs.total_worker_time DESC OPTION (RECOMPILE);
LINK:
http://dba.stackexchange.com/questions/52216/sql-server-2008-high-cpu-historical-queries
Query optimization:
http://www.sqlusa.com/articles/query-optimization/
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012
Maybe you are looking for
-
Cleaning up noisy vocal tracks
I have a few hundred vocal tracks to clean up, ie: room noise, lip smacks, coughs, etc. in between the actually singing. Right now I am manually going through eacj track and putting silence where I want it. Strip silence is not the best, as there are
-
Did not get Acrobat 9 with my CS5 Design premium download ???
I have the license key sent by my company for CS5 Design Premium. We upgraded from a previous version of CS3 and I was issued a new laptop to install the upgrade. - I no longer have the computer with the CS3 version or a disk from the past. This is a
-
Importing MP4's - is there a preset or best practices?
Hi I have some mp4 footage that I need to edit. (Yes, I know it's less than ideal editing quality, but I'm using the footage -- btw it's for the web) When I import it into Premiere it is not the usual avi size image. It's 320 x 240, so I have to tran
-
[nQSError: 15018] Incorrectly defined logical table source
Hi, I have two fact tables and a type dimension. business model / physical fact1 /fact1 fact2 /fact2 type /type now I have them joined up on the physical layer with foreign keys AND on the business model layer. Nevertheless I still get this error whe
-
Redirecting a domain URL to a file
Is there any SAF directive (e.g NameTrans) to redirect a domain URL (e.g http://www.xyz.com/rob.txt) to a file rob.txt sitting at location /x/y/rob.txt (other than root directory rob.txt). Bascially I want to achieve any request coming to http://www.