How to findout in IDOC whch segment error out

Hi All,
  If an IDOC error out then how to know which IDOC segment needs to be corrected without going through all the segments. Is there any transaction or table exists to know the status of error segment.
Thanks in Advance
Swapna!

Hi,
There is no such transaction. Some time in WE02 it shows the errored data segment. To check if i shows the error segment or not,
- go to WE02 and display your errored idoc.
- from the menu select "Edit --> Segments with errors".
If it shows errored segments, you are lucky. Otherwise you will have to figure out which segments is with error.
Regards,
RS

Similar Messages

  • How to findout whether IDOC is about to enter XI- Pipeline

    Hi Experts,
       Can anyone of you brief me on how to findout whether IDOC is about to enter XI- Pipeline.
      In other words, after IDOC enters into XI server. How we will come to know IDOC is entering the XI pipe-line.
      Please help in this issue asap.
      Thanks in advance

    Dear All,
    For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
    For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
    I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
    Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

  • How to edit inbound idoc with data errors in multiple segments and reproces

    Hi friends,
    i have a requirement for error handling of inbound sales order(ORDERS04) without using WORKFLOW and WE19.
    i have seen some function modules like edic_* ..
    but my doubt is how to edit the error data(how can i identify the particular error fileds in the segments)and how to reprocess the same idoc.
    Please help me...
    Thanks in advance

    Hi Narasimh,
    Please find the following steps to edit IDOC segment after you find the error using WE02.
    The example codes can be found in website 
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    STEP 1 - Open document to edit
    CALL FUNCTION 'EDI_DOCUMENT_OPEN_FOR_EDIT'
           EXPORTING
                document_number               = t_docnum
           IMPORTING
                idoc_control                  = itab_edidc
           TABLES
                idoc_data                     = itab_edidd
           EXCEPTIONS
                document_foreign_lock         = 1
                document_not_exist            = 2
                document_not_open             = 3
                status_is_unable_for_changing = 4
                OTHERS                        = 5.
    STEP 2 - Loop at itab_edidd and change data
    LOOP AT itab_edidd WHERE segnam = 'E1EDKA1'.
      e1edka1 = itab_edidd-sdata.
      IF e1edka1-parvw = 'LF'.
        e1edka1-partn = t_eikto.
        itab_edidd-sdata = e1edka1.
        MODIFY itab_edidd.
        EXIT.
      ENDIF.
    ENDLOOP.
    STEP 3 - Change data segments
    CALL FUNCTION 'EDI_CHANGE_DATA_SEGMENTS'
               TABLES
                    idoc_changed_data_range = itab_edidd
               EXCEPTIONS
                    idoc_not_open           = 1
                    data_record_not_exist   = 2
                     OTHERS                  = 3.
    STEP 3a - Change control record
    CALL FUNCTION 'EDI_CHANGE_CONTROL_RECORD'
           EXPORTING
                idoc_changed_control         = itab_edidc
           EXCEPTIONS
                idoc_not_open                = 1
                direction_change_not_allowed = 2
                OTHERS                       = 3.
    STEP 4 - Close Idoc
    Update IDoc status
    CLEAR t_itab_edids40.
      t_itab_edids40-docnum      = t_docnum.
      t_itab_edids40-status      = '51'.
      t_itab_edids40-repid       = sy-repid.
      t_itab_edids40-tabnam      = 'EDI_DS'.
      t_itab_edids40-mandt       = sy-mandt.
      t_itab_edids40-stamqu      = 'SAP'.
      t_itab_edids40-stamid      = 'B1'.
      t_itab_edids40-stamno      = '999'.
      t_itab_edids40-stapa1      = 'Sold to changed to '.
      t_itab_edids40-stapa2      = t_new_kunnr.
      t_itab_edids40-logdat      = sy-datum.
      t_itab_edids40-logtim      = sy-uzeit.
      APPEND t_itab_edids40.
      CALL FUNCTION 'EDI_DOCUMENT_CLOSE_EDIT'
           EXPORTING
                document_number  = t_docnum
                do_commit        = 'X'
                do_update        = 'X'
                write_all_status = 'X'
           TABLES
                status_records   = t_itab_edids40
           EXCEPTIONS
                idoc_not_open    = 1
                db_error         = 2
                OTHERS           = 3.
    Hope this will help.
    Regards,
    Ferry Lianto

  • BD10 and BD21 - Idoc custom segment - Error in BD21 but no error in BD10

    Hi All,
    I have a custom segment  'ZXXXXX' added to MATMAS05 idoc type.
    When I use BD10 to send a material to another system I don't have any errors but when I use BD21 Change pointers I'm getting an internal error.
    Is there something I need to add so that it works both for BD10 and BD21 without any errors?
    Please help.
    Meghna

    Do you have a filter in the distribution model for a field in your custom segment ?
    If yes ... you have to assign parameter CIMTYP (changing parameter) in your customer exit with the Value of your "IDoc Extensionname"
    Example:
    IDOCTP = MATMAS05
    Extzension = ZZMATMAS
    P_CIMTYP = 'ZZMATMAS'.
    That´s all !

  • How to archive the IDOC

    Hi
    How to archive the IDOC to remove error form some report
    Thanks
    Manjunatha

    Hi
    goto Transaction SARA , Archiving Object  - IDOC - IDoc - Intermediate Document
    1 .Enter the archiving object IDOC and choose the required action, here  Write (= Archive).
    A warning will be displayed if some of the archiving sessions for the archiving object IDoc are still incomplete. You can ignore the warning but you then run the risk of possibly archiving some IDocs twice.
    2. Define the  start date of the archiving session and the  spool parameters (print output).
    The traffic lights should now be green, indicating that these parameters have been maintained. Please note that you can set the archiving mode for the print output to Store Only and therefore avoid printing every individual archiving log. Enter the object type IDOC as the attachment parameter and use the F4 Help to select a suitable document type for the object type. Also enter a free text as Additional information for the archiving report.
    4. Choose   Maintain to create a report variant. As selection parameters, enter the message type and a time period within which the IDocs received their last, current status.
    5.You can specify whether you want to perform this variant as Test or Production, in the Process Flow segment of the selection parameter screen. If you choose Test, you get statistics of the processed IDocs. For a detailed log, select Detailed Log. 
       6.         Choose  Continue and save your variant.
       7.      Return to the archiving screen and choose .
    If you selected immediately in step 3, the message New archiving job was generated is displayed in the message bar at the bottom of the screen.
           8.      You can check whether your archiving session is complete by selecting Job overview. If you choose Administration, an overview of the completed and incomplete archiving runs is then displayed. If IDocs which match your selection parameters were found in the database tables, your archiving session is displayed as a folder full of archive files.
    Please gothrough the Link
    http://help.sap.com/saphelp_erp2004/helpdata/EN/dc/6b81ed43d711d1893e0000e8323c4f/frameset.htm
    Thanks & Regards
    Kishore
    Edited by: Kishore Kumar Chiluka on Jul 29, 2008 12:03 PM

  • How to identify/Highlight Idoc segment which is in error

    Hi All,
    We want that when the user looks at the IDoc which is in error, he should be able to find out the segment which is in arror. How to identify/Highlight Idoc segment which is in error.
    Prashant

    Hi kunyare,
    If you are receiving errors when trying to restore your iPad from Recovery Mode, you may find the following article helpful:
    Apple Support: Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694
    Regards,
    - Brenden

  • How to assign values to extended segments in an IDoc Orders05.

    Hi All,
    I am working for an oil industry client. I have a requirement to develop a Sales order interface (I am using basic type ORDERS05). After analysing the segments and fields of this basic type, I understood I need to 2 extra custom segments (for IS oil specific fields like 'CONTACT PERSON), 'Billing block' and 'Created by' fields in HEADER & 'Excise Duty Handling type', validation type in ITEM level).
    <each segment for a Header and a Item>
    I have extended the IDoc. But I am unaware how to fill up these custom segments. I understand there are exits in 'IDOC_INPUT_ORDERS'.
    Please suggest me the steps to be considered in the exits.
    Appreciate the <removed by moderator> response.
    Thanks and Regards,
    Kbip
    Edited by: Thomas Zloch on Nov 1, 2011 10:18 AM

    Hi,
    Yes I tried this option. But I have come across this error 'No batch input data for screen SAPMV45A 8001'. This must be because the values are fed in wrong screen fields. But When I cross-checked the internal table BDC_DATA in the program before CALL TRANSACTION and the recording in SHDB separately, the screen numbers are different. I am wondering how to find the exact fields which is to be filled up.
    Note: I am creating Sales Order with reference to a Contract. Do we need to do any special treatment for this?
    Thanks

  • EDI: Syntax error in IDoc (mandatory segment missing)

    HI all,
    Error Message - EDI: Syntax error in IDoc (mandatory segment missing)
    Status ID - E0
    Message No - 072
    Status of the IDoc - 26
    Please help me how to solve this issue?
    Thanks,
    Srini

    Hi,
    This error normally comes up when the sequence of segments has been disturbed.
    For successfully posting an IDOC you need to maintain the sequence of the segments as in WE30.
    You can also check which segments are mandatory in WE30 by clicking on the segment name and the pop up that comes.
    Thanks,
    Manish

  • Issue:EDI: Syntax error in IDoc (mandatory segment missing):Idoc extention

    Hi all,
    I have extended the the standard IDOC MATMAS05  classification view with structure as below-
    E1MARAM                        Master material general data (MARA)--->Mandatory segment
         Z1KLART                        KLART --->Extended chaild to E1MARAM
             Z1CLASS                        segment for class --->Extended chaild to Z1KLART
             Z1CHARACTERISTIC               CHARACTERISTIC --->Extended chaild to Z1KLART
         E1MARA1                        Additional Fields for E1MARAM
         E1MAKTM                        Master material short texts (MAKT) --->Mandatory segment(Child   to                                                                               
    E1MARAM )
    I am getting an error in IDOC fro material master as:EDI: Syntax error in IDoc (mandatory segment missing ).
    Diagnosys By system is :*The segment E1MAKTM has the attribute 'Mandatory' in the syntax description of the basic type MATMAS05 (customer enhancement ZMATMAS05). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
    This error may have been triggered by an unidentifiable segment before the expected mandatory segment.*
    Please help to resolve the issue.
    Thank you.
    Edited by: sanu debu on Apr 30, 2009 11:25 AM
    Edited by: sanu debu on Apr 30, 2009 11:31 AM

    Hi,
       You cannot add an segment in the middle of other segments.
    YOu have to add any segment at the last.
    If you want to add a segment as the child of another segment, it should be added after the last child of the parent segment.
    In you case, you have to add your segment after the E1CUCFG segment.(NOt under that segement)
    Regards,
    Ravi Kanth Talagana

  • How to dubug the IDoc-- I got the 51 error meesage.

    How to dubug the IDoc-- I got the 51 error meesage.
    I got 51 errormessage: No batchinput data for screen.
    Please let where i can debug this.

    Hi,
    Try this.
    Goto WE02, get the IDOC number.
    Goto WE19 use the same IDOC number.
      Click inbound function module --> give ur comev name
               -->select call in debugging mode -->in foreground.
    The COMEV program appears, then goto
    breakpoint menu --> breakpoint at --> function module --> give ur compr function module name and press F8.
    You will get the compr module and start debugging.
    Sharin.

  • IDOC created with errors!

    Hello All,
    I am sure that I am not posting this in the right forum. But I did this because, I get more responses in this compared to others. Sorry if this has caused any trouble.
    I had extended a standard idoc with 2 customer segments and procesed the idoc file. An idoc got created witht he following error message.
    EDI: Syntax error in IDoc (mandatory segment missing)
    Message no. E0072
    Diagnosis
    The segment E1EDK14 has the attribute 'Mandatory' in the syntax description of the basic type /IRM/CHGBACKS01 (customer enhancement ). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
    This error may have been triggered by an unidentifiable segment before the expected mandatory segment.
    Procedure
    Please check the IDoc or the syntax description of the basic type /IRM/CHGBACKS01 (customer enhancement ).
    When we insert new segments, where should we insert? How important is the segment number? Why is this error message even though that mandatory segment is there in the idoc?
    Please help.
    Thanks,
    Lavanya

    Hi,
    I got the following error message.
    Basic type ZCHGBCK does not exist
    Message no. EA447
    Diagnosis
    IDoc type ZCHGBCK could not be found.
    Procedure
    Please enter an IDoc type that exists.
    Srinivasan,
    I had tested this with the standard idoc and it was perfect. i am having these issues after extension only.
    Thanks,
    Edited by: Lavanya Boora on Jun 2, 2008 10:55 PM

  • Procedure to Error Out Outbound IDocs

    Hello,
             I have a Requirement in which I am using ORDERS05 IDoc Type and extended it to ZORDER05 to populate Custom Fields and sending the Purchase Order Outbound IDoc to the Vendor from SAP System. Now, my requirement is that if any of the Custom Fields are not maintained in SAP and not populated in the IDoc, I need to Error Out the IDoc with Error Status 26. I am currently working on the SAP ECC 5.0. I have implemented similar Error Handling Mechanism earlier by using Enhancement Framework as I was working in ECC 6.0 environment where I've added the Code by Creating an Enhancement Implementation in the Function Module IDOC_CREATE_ON_DATABASE. But since ECC 5.0 does not have the Enhancement Framework feature,  please let me know how to achieve this.
    Thank You,
    Venkata Phani Prasad K

    Hi
    why don't you try using the standard method for validation of data?
    By implementing the customer-function EXIT_SAPLEINM_002 or BAdI MM_EDI_ORDERS_OUT  you can make checks of completeness of the idoc segments (in your case, additional custom data) and, if they were not complete, report an error message raising the exception DATA_NOT_RELEVANT_FOR_SENDING
    ie
    if <Idoc Custom Field> is initial.
    MESSAGE ID 'S1'
                   TYPE 'E'
                   NUMBER '333'
                   WITH Additional data are incomplete' 
                   RAISING data_not_relevant_for_sending.
    endif.
    Thus you have the evidence of the error in the processing log of the output message while the IDOC is not created.
    The solution works very well and is not invasive.
    Regards.
    Andrea

  • How to route the Idoc to Two Different Locations based on the Plant Values

    Hi All,
    We will generate single Idoc, in that we will have 2 E1MARCM segments, one will have UK plant and another will have US plant.
    Now in XI, receiver determination i need to route the idoc to corresponding folders.
    How can we do this, because in x-path, we can check always for the first segment only, second segment will not come into picture.
    Please suggest me

    Hi,
    we can check the multiline  present in receiver determination  and specify the condition for both US an UK  receiver systems.
    Or   if you are sure that only  two (UK and US) will come , then check the condition for  Say  UK and  check the defualt reciver system in case of failure ,if its US it will go to the default system.
    You can also  try out the interface determination condition, please check if below links can help.
    How to write Conditions in Interface Determination for 2 IDOCs
    Single File to multiple IDoc
    Reciever idoc adapter Determination error
    Regards,
    Srini

  • Reg. Segment error

    Hi Friends,
    I have one doubt in ale/idocs that is " how to resolve the segment errors"?. if we are having a error in
    segment.
    Best Regards,
    Narasimha Rao.

    Hi,
    What kind of error u r facing?
    After Creating a segment it should be RELEASED to use in a IDOC.
    Please post ur error.
    Thanks,
    Nithya.

  • IDOC inbound Posting Error no 51

    Hi Friends,
      I am triggering Inbound error using XI.
    I am getting Error no 51(Application document notposted), when i am checking in WE05.
    Can any one guide me how to trace further error???
    Cause of Error????
    If data is incorrect in IDOC how can i check, that error is due which field record????
    Please guide me and give some T.Codes to trace error in inbound IDOCs
    Thanks & Regards
    Umesh

    the hint with the status record is correct: If you double-click it, you may have a button 'application log' - but only if the inbound processing creates a log.
    SAP knows thousands of IDOC basic types, message types, process codes and almost nothing is handled the same way.
    So first get the details about Idoc and message types, find out how the inbound IDOC is processed, get the function modules name, use the debugger to see where what error is issued.
    You may also have a look at the IDOC's segments contents and see if some data is obviously wrong.
    Or just tell the readers here what business process you try to handle using what IDOC - experience may be just one click away.
    regards,
    Clemens

Maybe you are looking for