How To Fit Films Exact To Screen S

Hello, Guys
I put films on my zen and they dont take up the full size of my zen screen. How can i do this. I use the Creative Software to convert (if needed) and to transfer.
Can you give me a simple (step by step) guide.
Thanks a lot for your help<!-- / message --><div align="right"><!-- controls -->[img"]http://www.anythingbutipod.com/forum/images/misc/progress.gif" alt="">

Drag them to the Desktop; then open them in Preview, which will resize them and can zoom them as required.

Similar Messages

  • How To Fit MP4 to Full Screen

    Some .avi files I convert (using WinAvi) to MP4 do not always fit the screen to the very edges, what should the size be for a MP4?

    The iPod Touch display size is 480 x 320 pixels. If you size your MP4's to those dimensions, they will fill the screen. If the aspect ratio is different (widescreen, for example) then there will be bars across the top and bottom if you preserve the aspect ratio in the conversion. If you force a conversion to 480x320, your picture may be a bit distorted, but it will fill the screen.
    Note that as you watch the video on the IPT, if you tap the screen to see the control bar, the button in the upper right corner (two diagonal arrows) will expand the movie to full screen.
    Hope this helps...

  • How to fit home pages to screen?

    we just had our HDD replaced, so i downloaded and installed firefox again...problem is, when firefox was installed, home pages does not fit the screen completely...it had like 0.5 margins on both sides...i already tried zoom but it only zooms the text, not the home page/website...what should i do? i never had this problem w/ my previous hard drive that also had firefox 3.6.3 on it...
    == This happened ==
    Every time Firefox opened
    == i installed firefox on a new HDD

    View > Zoom > [[ ] Zoom Text Only
    See also [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages

  • How to fit image to the screen of an Android device?

    Required to load the image from the gallery (CameraRoll) and fit to the screen entirely.
    Tried a lot of ways - completely unable to fit. Always cut off the edge of the image.

    You won't be able to write LabVIEW code that runs on the phone to return the data. What you would need to do is look to see if there is an Android App that can publish the data of the phone's internal sensors over TCP/UDP/bluetooth(?) and you can then write your LabVIEW VI to read that data using an appropriate method (e.g. TCP).
    I don't know of such an App - maybe you would have to write one which will be non-trivial. I tried a quick search of "sensor data tcp" and "sensor data" and there are some data loggers etc. for the phone sensors so maybe one of those will point you in the right direction.
    There is a little bit of information here http://stackoverflow.com/questions/18107148/real-time-wireless-sensor-data-transfer-wifi-or-bluetoot... and here http://onlinepresent.org/proceedings/vol4_2012/50.pdf
    Certified LabVIEW Architect, Certified TestStand Developer
    NI Days (and A&DF): 2010, 2011, 2013, 2014
    NI Week: 2012, 2014
    Knowledgeable in all things Giant Tetris and WebSockets

  • How to Fit iTunes to my screen

    I recently purchased my first iPod.
    When I open the preferences window, I make all the selections I want; however, the window is bigger than my screen and I cannot click the "Ok" or "accept" button at the bottom.
    I've tried right click for properties but to no avail. The right click does, however, give me the option to move it, but it will not allow me to move it up far enough to actually see the bottom and submit the changes.
    Please help.
    Dell Inspirion 4000   Windows XP  
    Dell Inspirion 4000   Windows XP  
    Dell Inspirion 4000   Windows XP  

    head into your "Display" control panel and click on the "Settings" tab.
    is your screen resolution currently set to 800 x 600? if so, try switching it up to 1024 x 768. can you see the bottom of the preference tabs in itunes now?

  • How to fit page to screenHow to fit page to screen?

    HOW TO FIT PAGE TO SCREEN?

    S-Video is Standard Definition Video only, and assuming you and your TV are in NTSC land, that is a maximum of 720x480 pixels.  Pretty small/low resolution.  You need to use a different input to your TV, like VGA (or "PC" as it is sometimes referred to on TVs) - i.e. a blue multipin connector with 3 rows of 5 pins each row?
    ... or get an HD TV, or a proper computer monitor.

  • How to fit to size to show the whole image in image display?

    HI, I am using a control palette to display my video images using image display. However, the size is alway out of proportion. How do i show the whole image in the small box screen size. Basically how to fit to size for the images? 
    Solved!
    Go to Solution.

    This should do the trick:
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • How to open images in Fill Screen mode from Camera Raw

    I am using Photoshop CS4 for Windows. I created an action that executes Fit on Screen and set the Scripts Event Manager to execute that action on the Open Document event. This works when opening a document from Photoshop.
    Here are my questions:
    1) After opening a raw image from Bridge in Camera Raw, when I then open the image in Photoshop, it does not run the Open Document event action to Fit on Screen. What event do I need to set the action to execute on when opening an image from Camera Raw in Photoshop?
    2) I added Fit on Screen to the action by selecting Insert Menu Item from the Actions menu and then selecting View-Fit on Screen. I cannot find Fill Screen on any pull-down menu (the button found on the Hand tool bar). How can I insert the Fill Screen item (which fills the screen a little more than Fit on Screen?
    3) In the Scripts Events Manager, when you select Add an Event, it says Any scriptable event can be entered here. See the Scripting Reference for the full list of Photoshop event names.. On the following Adobe webpage, I found the Adobe Photoshop CS4 Scripting Guide but I did not find a list of Photoshop event names in that document. Where can I find the list of Photoshop event names?
    http://www.adobe.com/devnet/photoshop/scripting
    Thanks to anyone who can help me out.

    > 3) In the Scripts Events Manager, when you select Add an Event, it says Any scriptable event can be entered here. See the Scripting Reference for the full list of Photoshop event names.. On the following Adobe webpage, I found the Adobe Photoshop CS4 Scripting Guide but I did not find a list of Photoshop event names in that document. Where can I find the list of Photoshop event names?
    >
    >
    >
    See "Appendix A: Event ID Codes" in the PSCS4 JavaScript Reference pdf file that
    comes with PSCS4.
    -X

  • How to get the exact time when condition records has been created?

    Hello All,
    Can anyone thorw some light on - how to find the exact time on which a particular condition record has been created?
    I have tried to get it from KONP {by inputting condition record number}, but unfortunately time is not tracked over there, but the date is tracked.
    Await your valuable inputs on the same.
    Regards,
    Hrishi

    Dear Hrishi,
    Try with this
    Go to display mode of the condition record through VK13 transaction from the condition record overview screen go to menu Environment >Changes>Click on Change report now system will take you to the Change Documents for conditions selection screen here you input proper selection data then execute now system will give the all the details here you can find the time also.
    I hope this will help you,
    Regards,
    Murali.

  • How do I disable the welcome screen in iCloud

    This may seem like a simple question but every time I attempt to access my iCloud account, I get the Welcome screen asking me if I want to activate Find Your device (whatever device I'm using) and if I want to activate Find my Friends (NO) etc.  Half the time I don't even know what the correct address is for iPad and get all kinds of other websites and I just give up.  Now I'm in a CRITICAL SITUATION in which I've gotten a Time Machine message that my WD Drive is no longer backing up and must be reformatted immediatly  - YIKES!  As you all can see I am very frustrated - I am still in the process of restoring data I lost from a hard drive failure in JUNE 2011 LOL How do I disable the Welcome screen in iCloud?  What exactly is the correct web address?  Sounds like a question for Watson.  I know others have had a similar problem with WD external drives; can I recover enough data to get me back up and running?  All my Time Machine back ups are on that drive. Awhile ago I bought Carbon Copy; it is apparently not functioning as it should (again back up on that drive) because I did the upgrade prior to getting the data off the WD drive, it installed a Trial Carbon Copy and is now asking me to reinstall what is sees as new software thus the last disc image is "lost.  HELP PLEASE

    Where are you trying to access your iCloud account, and from what device?
    If you are trying to access your iCloud account at http://www.icloud.com/ from an iOS device, you can't. The iCloud.com website is not designed to be accessed from iOS devices - access it on your Mac.
    Your Time Machine and WD external backups and Carbon Copy backups are nothing to do with iCloud, so I don't know what you think accessing iCloud will achieve in your situation anyay.

  • How to upgrade my MBP glossy screen to antiglare??

    I already purchased the MBP 15 however I want to change the screen to antiglare. I know I can install an antiglare film but this hits the image.
    How to upgrade my MBP glossy screen to antiglare after I already purchased the MBP? Is it possible to do it through apple?

    That would mean replacing the top cover of hte MBP, something on the order of $500...and would have to be done by Apple or an authorized Apple repair or it will void the warranty.  You could try talking to an Apple store genius bar person and see if they would do that but it will not be cheap.

  • How to make keynote images full screen?

    Question:  how to make keynote images full screen?  I just noticed. after many successful full screen shows with Keynote 09  5.1.1 that I am no longer seeing the show full screen, at 1280, but only using the center part of my macbook pro 13 inch screen (which will mirror just like that on the projection screen, as far as I know).  Did I hit a setting I do not know about to keep the images so small?
      Thanks

    Keynote  >  Preferences  >  Slideshow:    Scale slides to fit display

  • HT1766 After restoring my iphone 4 to factory settings, then restoring from a recent backup, my phone will reboot but keeps coming back to the "new setup or restore from backup screen". How can I by-pass this screen to go directly to the sync apps/music s

    After restoring my iphone 4 to factory settings, then restoring from a recent backup, my phone will reboot but keeps coming back to the "new setup or restore from backup screen". How can I by-pass this screen to go directly to the sync apps/music screen?

    Well, it's certainly behaving as though the phone that was backed up was synced to a different iTunes library.
    I'm going to throw one more thing out there... Yes, you backed it up to this computer... Was the phone previously set up to sync with this computer? Or was it syncing with a different computer and you just backed it up to this one?
    You may have to end up setting it up as a new device and rebuilding the phone by manually re-syncing your data, apps, music, etc. to the phone.
    Trying to keep your library on a different drive can be tricky. If iTunes starts up and the library isn't available, it may end up generating a new library ID, meaning that you could easily find yourself in exactly the position you're in now...
    I'm curious why there was a need to restore your phone to begin with... It may not have any bearing on this at all, but it could.

  • Problem - fitting applet in clients screen

    hi everyone.................
    in our project, we are required to embed an applet in a jsp page
    what we want here is - the applet should fit in the clients window size exactly without the scrollbars...........
    when we run this in our machine, i.e., we hardcode the height and width of applet - it works fine
    but when we run it one another machine(having different screensize) the applet appears with scrollbars(as expected)
    what we want is irrespective of the clients screensize, the applet should fit in exactly without the scrollbars.............
    please reply as soon as possible

    I'm not sure if what you want to do is possible. Even if you access the JavaScript screen.availWidth and screen.availHeight values, they don't seem to be correct. The height is especially off since it doesn't take into account the area being used by the browser. Also these values seem to refer to the screen size not the size of the window that the browser is running in. I tried setting up the applet in the browser with the following code:
    <html>
    <head>
    <script language="JavaScript">
    function insertApplet() {
       var elem = document.createElement("object");
       elem.setAttribute("code","TicTacToeApplet.class");
       elem.setAttribute("width",screen.availWidth);
       elem.setAttribute("height",screen.availHeight);
       elem.setAttribute("archive","TicTacToe.jar");
       elem.setAttribute("name","myApplet");
       document.body.appendChild(elem);
    </script>
    </head>
    <body onload="insertApplet();">
    </body>
    </html>It set up the applet ok but the size was definitely off. You can get around the problem of smaller than maximum size windows by using JavaScript to resize and reposition the window but I don't see any way to get around the fact that the availWidth and availHeight values aren't very useful.

  • How can I turn off computer screen, when mirroring to apple tv?

    How can I turn off computer screen, when mirroring to apple tv?
    Thanks.

    Welcome to the Apple Community.
    You can't. Mirroring is just what it says, it mirrors exactly what is on your computer screen, if there is nothing on your computer screen, that's what you will see on your TV screen.

Maybe you are looking for