How to fix 2008 MacBook error: load code signature error 4 for file "airportd"?
Macbook doesn't boot, error came up when trying to boot with safe boot with status. I have never had or used Airport Express. I tried rebooting plugged in directly to router and same error occurred. Any suggestions?
(Also receiving disk0s2 i o error in safe boot status)
Yosemite is not supported for Encore, but neither was Mavericks (even though it is on the list, I don't think it is truly "supported," and there were issues).
Many of the issues in Mavericks and Yosemite appeared to be permissions. Most Adobe apps need read/write access, and those were not the defaults for the OS.
Some Mavericks users reported the following fixes their problems - I eventually assumed that somewhere in the process, it was fixing permissions. But perhaps it does more:
http://forums.adobe.com/message/6109315#6109315
And comments for these operating systems for Premiere Pro, Adobe Media Encoder, and After Effects may be helpful. (Encore does not have a support team that is active, so nothing official for it.) But there are specific bug fixes for these OSs in CC versions, so....
Monahan re Premiere permissions
http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/
Kopriva re permissions and AE primarily:
http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
Re the Photoshop -1 issue:
http://forums.adobe.com/message/5950080#5950080
The workaround was not to left-click on the menu. Use right click, or other options and menu commands.
http://forums.adobe.com/message/5810884#5810884
See post 12 and several following where we are looking for workarounds to the error.
Similar Messages
-
Hi,
I'm using qm 8.5.2 (endpoint recording) most of customer PCs cannot play recording file in application.
When I launch application and try to play recoding file, it is stuck and show error message "PYLR2000 error playing a file. Try again or contact your Monitoring and Recording administrator." I've install all cilent requirements (validate pc is pass). The error still occur. Even though all requirements are complete .
So, How to fix this problem.
Thank in advance
NamkhaoHi bsetexast,
I'm fix this problem by using Java(TM) version 6.0.200.2 that can be download from UCCX when first run CSD (supervisor desktop). Even other higher java version is valid but this problem still occur. If you install higher version, you should uninstall it first and install this version as well.
If you cannot find them, I will send you via email. -
How to fix the VMWARE ERROR DOWNLOADING KICKSTART FILE ON Redhat linux 6.0
Hi Team,
While deploying RHEL6.0 i am getting error "VMWARE ERROR DOWNLOADING KICKSTART FILE ON Redhat linux 6.0" Please let me know how to fix this issues.
Thanks
vmware techtheoretically all I need to change would be
changed it to var handd = new hand();
change stage.addChild(hand); to stage.addChild(handd);
and the part im unsure on is
else
trace(fl_SecondsCounted + " sec");
hand.rotation = hand.rotation + 6;
fl_SecondsCounted--;
do I leave that part or change it to handd.rotation = handd.rotation + 6 -
Do anybody know how to fix an unknown error
Do anyone know how to fix an unknown error #1439 on ipod classc?
Why the option import cd is gone now if you Itunes 10.5?Hello there, please verify that you are using the latest version of iTunes.
Try these steps
Step 1. Connect a Ethernet cable to your macbook no wifi.
Step 2. Open iTunes
Step 3.Plug in your iPhone to your macbook
Step 4. Put the device into DFU mode.
DFU MODE STEPS
Hold the Power Button (3 secs)
Continue holding the power button and also hold the home button (15 secs)
Release the power button while continuing to hold the home button (10 secs)
You Should have black screen with nothing on the screen if done correctly.
Step 5: iTunes will either prompt to restore and update click restore and update
Just sit back and wait until you see the setup screen on your iphone if you still see error 53 is a hardware problem and needs to be replace by Apple. -
How to restore 2008 MacBook Air OS X 10.5 leopard to factory setting?
How to restore 2008 MacBook Air OS X 10.5 leopard to factory setting? Have DVDs. But no CD drive.
Thanks, but there is no "Remote Install" in my Utilities folder when I follow: /Applications/Utilities/Remote Install Mac OS X. I am running 10.8 Mountain Lion on my MacBook Pro.
-
How to fix 1604 &1603 error ipod touch 4g
hi plz help me....how to fix 1604 & 1603 error.....ipod touch 4g ios 6.1.3
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts. -
How to fix No Service error for my iPhone, which is recently factory unlocked from US and using it in India
Did you actually buy a factory unlocked and contract free iPhone from the U.S.?
The way you put it, it implies that someone has actually done "factory unlocking" on your iPhone, which is not possible. Factory unlocked iPhone is sold on Apple online stores in the U.S.
** One should not receive "No service error" on factory unlocked iPhone, unless the SIM is faulty; unsupported carrier or it's a locked phone to a specific carrier. -
Anyone know how to fix the 5002 error (cannot purchase music from i Tunes)?
Anyone know how to fix the 5002 error (cannot purchase music from i Tunes)? What's this error about? I searched and couldn't find it on the support page. This is extremely annoying.
Hello, I just solved my "Error 5200" problem by following these instructions to repair the permissions of the iTunes Music Folder:
http://docs.info.apple.com/article.html?artnum=93069
I hope this helps other people! -
HT4623 how to fix the itune error an unknown erroe occured (310)
how to fix the itune error an unknown erroe occured (310)
https://discussions.apple.com/message/24177027#24177027
Can't connect to the iTunes Store -
How to fix the E225 error on the MF 4380 dn printer
How to fix the E225 error on the MF 4380 dn printer
Hi okekeP,
The imageCLASS MF4380dn was not released by Canon USA in the United States, but was distributed in other markets such as Canada, Europe and Australia. I would recommend to referring to the Canon support group for your geographical area to ensure the proper support application is being used for your product. However. I will be happy to offer some assistance.
The closest US model would be the imageCLASS MF4370dn. The recommendation when the error occurs with this model is to perform a reset the product. If you have not done so already, please attempt to reset your laser printer as outlined below:
1. Disconnect the power cord attached to your machine while "on" for up to 10 minutes.
2. Reconnect the power cord for the unit and plug it into a different known working outlet direct to the wall (not a surge/power strip) to ensure it is receiving full power.
4. Once your unit has initialized, confirm an error is not displayed in the LCD.
If unresolved, please refer to your Canon support contacts for further assistance and whether a firmware update may be available to address the issue or if service may be required.
In case helpful to you, here are direct links to the product page for your laser product:
- if your product was purchased in Canada, you can visit the product page for your laser device on the Canon-Canada website, www.canon.ca.
- if your product was purchased in Australia, you can visit the Canon-Australia website, www.canon.au.
- if purchased in Europe, you can visit the Canon-Europa website, www.canon-europe.com
I hope this is helpful to you.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Revision: 3519
Author: [email protected]
Date: 2008-10-08 04:17:40 -0700 (Wed, 08 Oct 2008)
Log Message:
Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service. The error string said that there was no flex.messaging.services.AdvancedMessagingService registered but it is the flex.messaging.services.AdvancedMessagingSupport service that needs to be registered.
Add configuration test that starts the server with a destination that has the reliable property set which is an advanced messaging feature but there is no AdvancedMessagingSupport service registered.
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/errors.properties
Added Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/services-config.xmlHi,
Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
some port while in reality there isn't.
I'll eventually contact Microsoft Support, thanks for the suggestion.
▼
▲ -
When importing files, my view window to search for files is really small, how do I make it bigger so I can actually search for files?
How big this is depends on the size of your screen. On a 13" it is really small. But you can improve things a bit. Click the green button to make the import window fill the screen.
Drag the area between the file list and the preview area up or down to increase one or the other: -
I did the Downgrade to 10.7 / How to fix the 42408 error?
I did the downgrade iTunes to 10.7 (Because everybody who is into organizing the library knows that iTunes11 *****)
And im getting this 42408 error?
How to fix it? i really need to Authorize the computer.
I want to sync my iPod and all the Apps.
I did all the replacement of itunes library.itl
the AppZaper and Pacifist stuff
HELP PLEASE!!Thanks, I tried your idea.
But doesn't work
Now im gonna try this:
McGroarty
Re: From iTunes 11 back to 10, but (-42408) error
Nov 30, 2012 6:05 PM (in response to blackxacto)
To get rid of error -42408:
1. Close iTunes
2. From a terminal: killall iTunesHelper
3. Unplug any iOS devices
4. Restore these from a backup of /System/Library/PrivateFrameworks/ - you want to replace the current versions when Time Machine (or whatever you use) asks.
AirTrafficHost.framework
CoreFP.framework
DeviceLink.framework
iTunesAccess.framework
MobileDevice.framework
Reboot before loading iTunes or reattaching any iOS devices for good measure.
Good luck! -
How to fix an unknown error occurred -54
anyone to know about this can you show me how to fix thanks a lot
It would help if you would tell us in which context this is occurring.
== Error -54 ==
From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Some of the old codes still apply to OSX although there is no formal list of OSX error codes.)
First, try simply restarting your computer.
iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814
Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad. -
How to fix 'An Unknown error has occurred" when trying to save an illustrator CS5 doc
Hi
I have just upgraded to a new iMac late 2013. After running a migration from my old mac to the new. I now have the following error: "Unknown error has occurred" when trying to save an illustrator CS5 doc.
How do you fix 'An Unknown error has occurred" when trying to save?
All help, most welcome.
Thanks
MartyHi
Thanks for your response. I have reinstalled and used the adobe clean software to remove all adobe software first. still not working. Can you explain in more detail "fix the permissions on your User: Library folders"? I have verified disc perms in Disc Utility.
Thanks
M
Maybe you are looking for
-
Dlink router + external drive for itunes library?
I have a MBP who is slowly running out of space... I have a dlink router 826L with a 2TB external hard drive that is plugged in by usb into the router. dlink has settings to set it up as storage, but it wants to use a sharepoint software thing. I wan
-
Linksys WRT54GS Version 6 router help
Hi all! I have a Linksys WRT54GS Version 6 router with Firmware Version: v1.50.6 and I was wondering if anyone could help me find a free log viewer, since the log viewer that comes with the router just gives the last few sites outgoing and incoming,
-
Hi, I'm fetching supplier, Item, qty information from different tables. Q1: Supplier Name, Quantity are the columns in my select clause, for only one particular item (hard coded). But I want a single query which fulfills my below 2 requirements: 1. c
-
Mount poinst not compatible for language DVD;s in configuration pgase.
Dear all, I have an starnge issue. we are in process upgrading system from ECC 5.0 to ECC 60. EHP4 sr1 SP03. So, as part of plan i have used language DVD's 51036904_1 to 8 & run till cheks phase successfully , however we found some errors recurr
-
Photoshop CS6 Force Closing Multiple Times a Day
I am running Photoshop CS6 and the application is force closing on me more than 10 times a day (no exaggeration, and some days it is more than 10). I have been using CS6 for over a year now and it seems within the past 4 months the problem continues