How to fix a carrier issue

Hello
I have a Iphone 5S that is suppose to work on verizon but it wont so i called Apple and they told me it sounds like a carrier issue
so this phone is unlocked but its shows at&t on apple system so i called at&t and they have no records of the phone so how do i fix this
the phone was replace about 4 weeks ago by apple
not to sure what to do
please help

Take it back to the Apple Store where you got it replaced. It sounds like you go the wrong phone.

Similar Messages

How to fix the Timing issue in Discoverer reports

Hi,
While running the discoverer report in Discoverer plus is taking more than 1 hour to complete( Gen.time + Extract to excel)
where as the same report completes quickly in discoverer desktop.
how to fix the timing issue in discoverer plus
Thanks
Srinivas

Timo Hahn wrote:
There is a problem with autoHeightRows and columnStretching used together in 11gR1.
Have you tried without columnStretching?
Or have you tried if it works in 11gr2?
TimoHi Timo, Thank you very much for taking time to respond to my question.. :)
Back to my question...
I tried removing the columnStretching although my requirement really requires this but no effect really happens even if I remove this.
Based on my investigation on the generated HTML, I notice the following items:
1. A table is being wrapped in a div that is being set at a fixed height.
2. On first load, if your autoheight rows is set to 6, the framework is setting a height of 96px to the div. This height would almost cut the last row of the table.
3. If you try to refresh the page or try to re-PPR the component, the framework resets it to 102px which causes the last row to be fully displayed.
My only concern is that IE is perfectly displaying this while Chrome and FF are having problem.
Based on my understanding, the framework is messing up the height only on first load. Not sure but this is how I see it. I am really not confident also on my findings
and I would most likely hear other's comment.
Thanks.

How to fix applepushservice.dll issues for downloading iTunes on Windows 7 64 bit

I recently had iTunes crash on my home PC, Windows 7 64-bit. I have tried several attempts to uninstall and reinstall the program and it still does not work and I receive error messages. The latest: The program can't start because ApplePushService.dll is missing from your computer. Try reinstalling the program to fix the problem. Problem is, the articles that I have seen state this is an Unknown source and my firewall will not allow it to be installed. The original error was a Windows Error 7 (registry & .dll issues). Any suggestions on how to fix this problem?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

How to fix Action Link Issue in Table and Pivot Table when used Section

My OBIEE Version: OBIEE 11.1.1.6.5
Issue Description: Action links (Navigate to BI Content) doesn't work in PIVOT TABLE or TABLE object when used Section area (one or more columns in Section area).
If you want to recreate this issue please follow next steps:
1.     First of all you have to create one analyse with min 3 columns (for example Time.“Calendar date“, Product.Product, „Base Fact“. Revenue -> from Sample Sales Lite )
2.     From column properties -> Set value Action Link Interaction on some column for example Product.Product (choose Navigate to BI Content -> any created BI report )
3.     Click Results Tab choose Pivot Table and assigned one dimension column to Section area
4.     Click preview icon
5.     When you click on action link nothing happens
6.     If you drug and drop column from Section Area to Excluded, Table or Pivot table Area then Action Link works perfectly
How to fix this issue?
I'll be grateful for any help!

This is Bug:15922681 - ACTION LINK NAVIGATE TO BI CONTENT DOES NOT WORK WITH ATTRIBUTE IN SECTION
Upgrade to 11.1.1.6.6 will fix this issue.

On (release) action problem - how to fix the loading issue?

Hi,
I'm making a progress with the website in Flash. I have pretty much things already done. Motion tweens that change alpha in percentage ammount are working correctly - I've used them for loading pages but I encountered a one tiny problem...
Describing the website: there are buttons that - when you click - play an animation (motion tween with alpha changing) to load a proper page that is pinned with a particular button. So: home button loads the home page, bio button loads the bio page etc. All pages go with the motion tween - they fade in the website (from alpha 0% to 100%). Everything is fine and the website with everything works just perfect! But: there's one thing that doesn't keep me calm. When I open my website in a browser to test it and I click on each button to load pages - everything is ok, but when I want to click the same button few times - other things are being loaded by clicking the same button.
For instance: I click the "bio" button once and it loads my biography page with the motion tween as I described before. But when I want to click it secondly or thirdly it doesn't load my biography page anymore but a page before that one (in this case: home page). When I click it again the button loads my bio page again. So - in sum - it doesn't load the same page all the time, but randomly: the proper one or the one before (in the timeline).
My AC code for each button is simple, for example:
on (release) {
gotoAndPlay(173);
Also I've got the "actions" layer that carries stop(); command in places that are for it.
I tried with _root.gotoAndPlay and also with frame_number +1 and always the same problem.
I hope it isn't anything serrious and can be fixed.
I'll be very grateful for help.
Greets!
J.J.

As I explained in my post: I test my website in the browser (firefox), I click on a particular button which loads a particular section. It works with all buttons but sometimes when I click the button an incorrect section appears.
For example: I click biography button, and the biography section appears. Then I click contact button and contact section appears. Then when I want to see biography section again and click on the biography button, the biography section doesn't appear but the other section appears, for instance: home section, about section, gallery section or other from what I have.
Concluding from the entire description I've placed above in the topic I don't know why this thing happens and I need some help how to fix this issue of loading sections firstly correct and then, after some clicking - incorrect.
I hope I really presented it clearly.

Facetime says connecting after you answer the call but doesn't actually connect and both iphone 5s were quick reset-ted and facetime was turnt on and off, any reasons like why or how and how to fix this concerning issue

facetime says connecting after you answer the call but doesn't actually connect and both iphone 5s were quick reset-ted and facetime was turnt on and off, any reasons like why or how and how to fix this concerning issue

Apple has released a document which is reported to address the recent FaceTime issue.
http://support.apple.com/kb/TS5419

How to fix Task form issue which is not opening in browser?

Hi All,
When trying to open task form link which is in email, facing:
How to fix this issue? thanks in advance!

Paul,
My scenario is: Having a team site and a sub-site. In sub-site, created on list form associated with designer workflow which will assign approval task to a person who are not a member of this sub-site but member of team-site.
Before assign task, assign permission to that person using impersonation step like:
Add Approve to item in Current Item
Add Approve to item in Association: Task List
When click the task link which receive in email, that person facing above issue. After I add that person in sub-site site viewer group, then it working perfectly.
My question is, is it possible to give approve permission to task list by designer workflow to a person who are not a member of a sub-site?

How to fix app download issues in iOS 5.1

Cannot update any of my apps on new ios 5.1. On wi-fi and they say waiting...just sits there. Reboot phone and even connected to iTunes. No luck. What gives? Thoughts on how to fix? Thanks

I reset my iPhone 4s to factory settings and restored from back up last night and reset the settings and I am still having issues with apps. Now one I use on a regular basis isn't working at all. I am going to attempt to get a new phone today. My wife's iPhone 4s works just fine after the update.
Is there any reason that some phones have issues and others work just fine?

How to fix the troubleshoot issue code 205?

Hello i have just bought Adobe Flash Cs6 and i try downloading creative cloud but everytime i download it i get a troubleshoot error code #205 if anybody could help on how to fix this then i would be most grateful, thank you.

Creative Cloud Help / Error downloading Creative Cloud applications
http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

IPhone 4S (How I fixed my battery issues)

Ok, so like many of you , I have been facing some issues with my battery. I am going to outline some things that I did:
Calibrate your battery!!! This is the most important thing. Let your iPhone COMPLETELY die to the point where it shuts off on you. Not 20% not 10%....just let it die. From there, wait 2 hours before plugging it in (yes this *****, but its necessary). Plug it in and let it FULLY charge. If after 8 or so hours you see it stuck on say 91% like mine was quickly unplug it and then plug it back in. It will quickly go to 100%
Go into your iCloud settings/Documents&Data and disable use cellular. Not only will this save you data, it will save your phone from pushing things to the cloud while not connected to wifi. Also, for the time being I have iCloud disabled completely.
Turn off location services for anything you really don't need it for.......do you really need to know exactly where you were when you Shazamed that song? Didn't think so.
I did all of this last night, and as of this morning, I have been listening to music for an hour, done some browsing, send texts, imessages and e-mails and I am sitting at 96%.
Hope this helps you all.
Cheers

My iPhone 4S did once again did lose it's wifi connection after running perfectly for about 8 weeks.
I was streaming Pandora Radio via bluetooth connection at the time, ( not sure if that has anything to do with why the wifi dropped out again, but I thought I'd mention it anyway)
But!.... I was able to get everything up and running perfectly again by simply grabing my girlfriend's hair dyer heated it up again for about 5 - 7 minutes ( the over heated message even appeared this time) then powered it off, warped it in a plastic bag, stuck it back in the freezer for 15 minutes, took it out of the freezer, powered it back on, and Abracadabra it works perfectly again!!!
Phone has been running perfectly AGAIN for about a week now.
One strange thing this time after fixing it for a second time is that the the little WiFi symbol no longer shows at the top of the screen, but the wifi connection and everything IS RUNNING PERFECTLY!
If all I've got to do once in a while, is spend about 20 minutes with a hairdryer and a freezer to keep my iPhone 4S running perfectly.....well I'm as happy as a pig in s*** :-)
And please no comments about how I have now voided my apple support etc. I never had any to begin with (it's a 2nd hand phone and I really couldn't care less about warranty issues etc etc etc..... The phone works, and that's all that matters to me!

How to fix Online help issue with F1

Dear All,
I think you already know this issue : when using a proxy, Online help is not working on Adobe Reader XI.
message displayed : "Online Help content cannot be displayed. Verify you can launch your web browser and have access to the Internet."
I already checked on this forum and tried some things to fix this, but without any success :
- try to add the registry key FeatureState -> not working
- check if IE is correctly defined as default browser -> it is
Accessing Online help from the Help menu was by passed by the following .js :
app.addMenuItem({
cName: "MyHelp", cUser: "Adobe Reader XI Help...",
cParent: "Help",
cExec: "app.launchURL('http://helpx.adobe.com/reader.html');",
nPos: 0
But, the message still appears when pressing F1 shortcut.
Details : Adobe reader 10.0.06 packaged through an administrative installation et customized with Adobe Customisation Tool
I tried to install directly from the setup.exe to be sure that was not caused by my package, and the issue is still the same.
I'm an application packager for the European Court of Auditors and we want that Help works through F1 shortcut. This is mandatory for me.
Thank you in advance for your help.

Timo Hahn wrote:
There is a problem with autoHeightRows and columnStretching used together in 11gR1.
Have you tried without columnStretching?
Or have you tried if it works in 11gr2?
TimoHi Timo, Thank you very much for taking time to respond to my question.. :)
Back to my question...
I tried removing the columnStretching although my requirement really requires this but no effect really happens even if I remove this.
Based on my investigation on the generated HTML, I notice the following items:
1. A table is being wrapped in a div that is being set at a fixed height.
2. On first load, if your autoheight rows is set to 6, the framework is setting a height of 96px to the div. This height would almost cut the last row of the table.
3. If you try to refresh the page or try to re-PPR the component, the framework resets it to 102px which causes the last row to be fully displayed.
My only concern is that IE is perfectly displaying this while Chrome and FF are having problem.
Based on my understanding, the framework is messing up the height only on first load. Not sure but this is how I see it. I am really not confident also on my findings
and I would most likely hear other's comment.
Thanks.

Creative Cloud Installation: Gets half way completed then Windows says its has stop working and will find a solution BUT NEVER DOES. How to fix/bypass this issue??

So for the last 36 hours I have attempted to install Adobe Pro with no luck. Creative Cloud is the app I am forced to use to install. I have windows 7 OS, as the installing begins all is working just fine. As the installations gets about 50% complete, it seems to stall out and then Windows interrupts and says "Creative Cloud is not responding, Windows will find a solution and fix the problem" Mind you Windows never comes back with anything close to an solution. Has anyone seen this?? Do you have an fix?? It would be greatly appreciative

Hi,
Could you please retry after restarting the system.
If this issue does not get resolved even after restart then please share the following details :
1. Do you have any previous version of Acrobat installed?
2. Share PDApp.log, MSI Installation log file from %temp%
Thanks,
Vinod

How to fix YouTube playback issue on Iphone

How can I fix the YouTube Playback error that occurs on my IPhone?

Hi AZBurns,
You could try and dab a small cotton swab in isopropyl alcohol and try and remove the soda from the ringer switch. Please dont drench the cotton swab!
Does the vibration motor work at all?

HANA XS - How to fix Inactive Testing issue of items not loading (when using the cookie)

Is anyone else having issues with the inactive testing using the cookie (sapXsDevWorkspace)? My team has abandoned using it because it is causing us a lot of trouble. It initially worked well for a few hours, but eventually it stopped loading resources. We got errors loading the SAP js libs or even the newly commited ( but not activated) code changes.
I have seen the feedback on SCN post http://scn.sap.com/thread/3517042 but we cannot seem to fix the issue of the system not loading things. I am on version SPS7 (1.00.70.00.386119) on AWS and I have seen it work for a short period then it seems to get flaky and stop working. I don't understand what is causing the error to occur as I cannot make it do the same thing twice.
Here are some screenshots:
Cookie defined in Chrome
Repository Name with my user:
This is the result:
Sometimes it loads more of the files and fails later:
I verified that I logged in under the same user and the cookie name. The system has developer_mode set to true. Is there something we're missing?
Jim Giffin.

Hi Jim, Hi Matthias
we are facing the exact same problem with our project.
Jim, we had the same phenomenon that it worked for 1-2 reloads and then stopped at all.
After looking into it, I figured out, that the browser was using cached files from all resources except from the "inactive" new files, which we could access with the cookie. This made it work, however, when we refreshed again, the browser eventually removed its cache and tried to load inactive versions from files that didn't had any.
We ended up in empty responses (no content, no headers)
We are really looking forward to find some answers here, as it constantly causes trouble to work with multiple developers on the same activated code base.
Any input or suggestions are appreciated.
Best Regards,
Axel

How to fix gold padlock issue on downloaded new file

I have a script that downloads image file (.jpg) from ftp server to a safteyPic folder (which is inside standard user's picture folder). Script runs as an admin and every time
it runs, downloaded file has gold padlock on it. I tried sharing that folder with everyone and also changed security settings so that everyone has full access. Padlock goes away after I click on "Replace all child object permissions with inheritable permissions
from this object" but it only works for the file inside it, once script runs and it downloads file, all new file has padlock on it.
Is there any way to fix it?
Thanks for your help.

Hi,
What is the result if we manually download the files from the ftp server, and what is the result if we download files form other places or other folders and paste it to another folder for a test.
I think we should finger out whether this issue is related with the script? the permission of the files in ftp server? or the permission of the safteyPic folder.
Make sure you have full permission of thes files
Regards
Yolanda
TechNet Community Support

How to fix a carrier issue

Similar Messages

Maybe you are looking for