How to fix a problem with the discharge rate of the battery in the iPhone

Hi I have a question namely how to fix the problem of discharging the battery in the iPhone 4 with ios7.1

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

Similar Messages

  • How to fix a problem with my book pro that has a gray screen with a folder with a question mark on it

    does any one know how to fix a problem with my book pro that has a gray screen with a folder with a question mark on it?

    Hello Mokhtary123 and welcome to Apple Support Communities,
    It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.
    But basically your system can't find the boot disk. Usually this is a symptom of a dead/dying/corrupted hard drive;
    A flashing question mark or globe appears when you start your Mac - Apple Support
    OS X Recovery
    http://support.apple.com/en-us/HT4718

  • How to fix underscan problem with footage

    I am trying to help a friend fix a problem with some footage he shot. A client was standing in front of a painted matte. The footage was shot,(and cannot be re-shot) and once back in the studio he found that a the edge of the matte that is not painted is showing up beyond the TV safe area. It can be seen on a computer screen and if shown thru a projector. The viewfinder of his camcorder did not show this problem.
    So how can we fix it? It is a narrow band of white on the left side of the screen. The problem is that part of some leaves cross over it and out of frame. We have tried just simply scaling it up to get beyond the white edge but the picture quality begins to degrade. We have to fix this using FCP since that is all that is available to us. The clip is fairly long so we probably won't have the time to fix it in Photoshop.
    Any help is greatly appreciated.
    He is using FCP4.5 on a dual processor G5.
    Thanks!
    Ymir

    The cropping would leave a black bar. Something I was thinking about doing has cropping involved. I thought about duplicating the clip and stacking it over the original clip. Then crop it as suggested and then scaling the clip underneath and apply a Gausian blur. This would eliminate the white edge. Problem is, I have a hard line where the cropping took place. If there was some way to just feather the left edge of the crop.
    My friend thinks some type of masking needs to take place where we could just re-color the white bar but as of yet we haven't discovered how to go about it.
    Thanks for the suggestion,
    Ymir

  • How to fix a problem with the order of strings in a JSON response for a CFHTTP request?

    Good morning, guys! (It's 10:50 a.m. in Brazil)
    First of all, I'm still new at CF and my questions may seem too much silly and my English's not the best, so, please be patient with me. hehe
    Well, I'm accessing a link via CFHTTP that gives me a JSON response. I'm not familiar with JSON yet, so I'm working it as a string and using string functions (Find,RemoveChars,Replace,etc), but it happens to me that I'm receiving a certain kind of order of the strings list from the JSON when I access it directly from the browser and other kind of order totally different when I access it from the CFHTTP.
    I only figured it out because I was working at home with my code and there everything went just fine as expected. Then I brought to my job to develop a little bit more as soon as I get a free time and here my code doesn't work anymore. When I took a look at the JSON by a CFOUTPUT, I realized the strings were in a different order.
    Does anyone know why is it happening?
    Link to the JSON: http://sigmine.dnpm.gov.br/ArcGIS/rest/services/extra/dados_dnpm/MapServer/0/query?text=83 0620/2012&geometry=&geometryType=esriGeometryEnvelope&inSR=&spatialRel=esriSpatialRelInter sects&where=&returnGeometry=true&outSR=&outFields=FID,Shape,PROCESSO,ID,NUMERO,ANO,AREA_HA ,FASE,ULT_EVENTO,NOME,SUBS,USO,UF&f=pjson
    Basic code simplified to find out that the order of strings were coming different when access by CFHTTP:
    <cfhttp url="#URLAbove#" method="get" result="DadosDoDNPM" charset="utf-8" timeout="10000" />
    <cfset DadosJSON = deserializeJSON(DadosDoDNPM.FileContent) />
    <cfif arrayLen(DadosJSON.features)>
        <cfset CodigoFonteJSON = ToString(serialize(DadosJSON.features)) />   
        <cfoutput> #CodigoFonteJSON# </cfoutput>
    </cfif>
    Is there a way to fix it and to make my code work everywhere?
    If it matters, I use Railo at home and at my job.
    Since now, I thank you.

    When you deserialize JSON data, ColdFusion converts it into native structures and arrays (roughly equivalent to JavaScript objects and arrays).  In ColdFusion, structures are unordered (that is, they don't maintain keys in any particular ordered sequence).
    This really shouldn't be a problem though, at least not if you just want to work with the data contained in the deserialized JSON structure.  So DadosJSON should be a native ColdFusion structure, and you can interact with it like any other structure in ColdFusion.  In fact, you should not have to re-serialize it at all unless you need to send it to an external application using JSON.
    Why are you reserializing the data?  And why use serialize() instead of serializeJSON()?
    -Carl V.

  • Hi there, could you please tell how to fix wifi problem with my iphone 4S since yesterday. The wifi on/off is disabled. thanks

    Since yesterday the wifi on/off option stopped working suddenly. I mean it looks like as its freez. could anybody assist. thanks

    Follow the steps in the article below that is specific to the issue you are having:
    http://support.apple.com/kb/ts1559
    hope this helps

  • How to fix ASA problem with Error message id 713231, 713232 ?

    Dear all,
    It's been two day with this problem and it's not possible to stablish vpn with peer yet. ASA is reporting error with messages id: 713231 & 713232. Before this the vpn was working perfectly. I did a reload of the ASA, but the problem continues:
    713232    Group = x.x.158.254, IP = x.x.158.254, SA lock refCnt = 0, bitmask = 00000000, p1_decrypt_cb = 0, qm_decrypt_cb = 0, qm_hash_cb = 0, qm_spi_ok_cb = 0, qm_dh_cb = 1, qm_secret_key_cb = 0, qm_encrypt_cb = 0
    713231    Group = x.x.158.254, IP = x.x.158.254, Internal Error, ike_lock trying to unlock bit that is not locked for type SA_LOCK_P1_SA_CREATE
    ASA 5510 version 8.3 (1)
    Is there anybody who knows how to fix this?
    Thanks in advance.

    Firstly ASA version 8.3 isn't that stable. I would advice you to upgrade to 8.4(5).
    Did you do a search in google? This is wat I found:
    http://www.cisco.com/en/US/docs/security/asa/asa80/system/message/logmsgs.html#wp4776301
    Posted by WebUser Erik Boss from Cisco Support Community App

  • How to fix Frame problems with fonts

    When I try to "Save as book" to PDF, I get a font error that prevents the file opening for printing.
    When I view the file, I get:
    The "Myriad Pro Light" Font is not available.
      "MyriadPro-Regular" will be used in this session.
    The print error does not specify which font, but I assume it is the one mentioned in the first line above.
    The font is in the Windows font directory, but FM is not seeing it.  How do I fix this?
    Unstructered FM12, Win8.1, HP printers (no choice about that)

    I am hoping somebody here can say what bits of Acrobat FrameMaker 12 includes. I don't know, because I am using Tech Comm Suite, which includes full-on Acrobat.
    At the least, FrameMaker solo should include the PDF printer driver and Distiller. With these, Save as PDF from FrameMaker should work fine, and if you have the fonts you should be able to print and embed them in a PDF.
    In my experience, font issues for Adobe products happen this way:
    You have certain fonts installed. There is no problem with these.
    You set as default a printer that has its own resident fonts. Those fonts now become available.
    You use the printer resident fonts in your document, which is fine, until ...
    ... You change printers, perhaps to PDF printer, and now the printer-resident fonts you thought you had are no longer there.
    Note, some printers are set to substitute fonts. So, you might specify a certain font but your HP printer actually has a font substitution table that is swapping your chosen font for Times New Roman, or sommat. Watch out for that, too.
    So, double check you have the fonts you think you do; view them in Character Map, for example.
    Cheers,
    Sean

  • How I fixed my problems with Outlook Sync

    This is a repost into its own thread.
    Well, I finally got the Calendar in Outlook 2007 to sync properly!
    I have Win XP with Office 2007. Using the latest versions of iTunes and firmware.
    It seems there must have been something corrupt within the Calendar, in the .pst file. Not sure what but the more I thought about that .pst file, I have been using it for many years and continually moving it to my next system or software version. So, who knows what junk there may be hidden in it.
    Despite the fact that I deleted just about all of the entries in the Calendar and just kept the ones from the last month. Still did not work.
    Plan A
    Go into Outlook and print out your calendar, as far as necessary. Unfortunately, you will have to rebuild your calendar manually. The calendar printout will assist in recalling the date, time and purpose, etc. When I did mine, I simply worried about upcoming appointments and therefore, it was not a big issue. I later added holidays in Outlook, using the holiday add function and that worked fine and sync’d ok.
    Go to your .pst file. If it is in its default location it will be C:\Documents and Settings\User Name\Local Settings\Application Data\Microsoft\Outlook.
    I copied the original .pst file and made a duplicate copy and left them in their original directory. Then I renamed both files, to oldoutlook.ddd and oldoutlook1.ddd so Outlook could not find them any longer.
    I then opened Outlook 2007 and of course it gave me an error about not being able to find the .pst file and it suggested a new .pst file, etc. I accepted the new file.
    Then, I went back to the original .pst file and renamed it back to what it was normally, I believe was outlook.pst
    I then opened Outlook (which opened the new file, not any of the old files) and used the File>Import, to selectively import all of the items, except the calendar.
    Unfortunately, this made the process a little long but I was able to finish it in about 30 minutes.
    How-To
    In Outlook 2007, Choose File>Import & Export. Choose "Import from another program or file." Click Next. When you get to the “Import a File” dialog box, choose “Personal Folder Files (.pst)”. Click Next.
    Then Browse to the location of your .pst file. If it is in its default location it will be C:\Documents and Settings\User Name\Local Settings\Application Data\Microsoft\Outlook.
    Once you get to the Outlook structure, you will notice many folders, as part of your .pst file. DO NOT choose the first listing, which will import everything within your .pst file. Rather, go down the list and selectively import one item at a time, being careful to NOT import the Calendar.
    Once you have completed this, you can begin re-building your calendar. A lengthy work-around but it is nice the sync is finally working.
    One other key item I found here. Recurring appointments seem not to sync if they do not have an end date. FYI
    Hope this helps!
    DD

    Something I read another user did successfully was export the old PST data into CSV, and import it into the new PST. That saved the step of having to reenter everything.

  • How to fix starting problem with hp pavilion a618x

    Screen freezes on HP logo screen computer won't start.

    Gilly777, welcome to the forum.
    With a computer of this age there could be several causes for the computer freezing.  However, I believe that It could be a failing/ed power supply unit (PSU).  A failed PSU can cause numerous types of problems.  Here is a guide to help you troubleshoot the problem.  Be certain to use the link titled "Resolving Startup Problems in Windows XP, ME and 98". 
    Please click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • I would like to ask you how to fix this problem with firefox 4 final version: I open one firefox browser window and i leave it then i open another new window of firefox and it opens not homepage but the last closed tab. Thank you in advance

    could you please help me with this because it makes me to choose other browser

    Many thanks for your reply, Waka – guess you're right that it's a new add on or bust... I still find it odd that such a common UI feature across mobile browsers is unavailable in FF24 either as an option under settings or as an add-on. Surely, I'm not the only person who finds this puzzling?

  • How to fix shortcuts problems with foreign keyboards and photoshop in english

    Some shortcuts won't work with a non english keyboard and you'll have to switch to english keyboard to fix this but it's not always practical
    You can use a program from Microsoft available here to customize your keyboard
    http://msdn.microsoft.com/fr-FR/goglobal/bb964665.aspx
    It works well with Win 7 64 bits and it's easy to use !
    And you can still use your normal keyboard with others application (windows can switch automatically keyboards)

    There is too much nonsense talked about HDMI cables. For a start they shouldn't be sold as 1.2/1.3/1.4 etc compatible, the HDMI standard expressly forbids this. There are standard (cat 1 - < 75 MHz) and high speed cables (cat 2 - < 340 MHz) and both will work with the Apple TV.
    Strictly speaking a cable should meet the HDMI standards before it can be sold and if it doesn't work you should ask for it to be replaced. Higher cost cables cost more because of quality, quality that is represented in quality control or tolerance, higher price cables will likely have a lower failure rate, but that doesn't mean cheap cables shouldn't work when you buy them.
    Uniformity in diameter and in length are paramount. If one component is 1/3200 th of a mm longer than another the signal will become out of sync, variations in diameter can cause the signal to bounce back along the cable.
    Personally, I'd never buy an expensive HDMI cable but I'd also avoid the ultra cheap ones, they should work out of the box, but throughout their life they will likely be pulled, bent, tripped over and run over with the vacuum cleaner, better cables are likely to have greater resistance to such treatment.

  • How to fix noise problem with Canon sx50 HS

    I'm wondering why are all of my videos I record with my Canon sx50 HS so noisy as in fuzzy not sound. No matter how I change my Aperture, Iso, Shutter speed, it still doesn't make much of a difference. I still see noise throughout my videos. I have a room where my lights are good, 75 volts and I still can't get rid of it. Can anyone personally help with this issue?

    For starters, I don't know how good of video is possible with the sx50.  It's a compact camera, so there will be limits.
    As to the noise and/or fuzziness.  Depends on if it's noise, or fuzziness, but I suspect both would be caused by the same thing - lack of light.   Photography/videography takes a surprising amount of light.  When you're indoors you need a surprising amount of bright lights for good picture.  I'm not sure what you mean by 75 volts, but a 75 watt light isn't bright at all, not for a camera.  How does the video look if you shoot outdoor?
    If a camera doesn't get enough light it's going to do three things - open up the aperture, raise the ISO, and increase the shutter speed.  Raising ISO adds noise, plain and simple.  Opening the aperture can reduce the amount of the photo that will be in focus, making things look fuzzy.  And increasing the shutter speed can allow movement to show, also making things fuzzy.  Without seeing your video it's hard to speculate which it is.

  • Anyone know how to fix a problem with my earphones?

    when i plug my headphones or earphones in to my laptop (macbook pro) one side is significantly quieter than the other side. i have tried different sets of earphones on other devices and can confirm it is my laptop. any ideas on what i should do? i keep my laptop in very good condition and dont have my earphones plugged in to my laptop very often. this is a major inconvenience as i enjoy using my headphones for car journeys or films and would greatly appreciate any help, thanks

    Try going to system preferences/sound/output and make sure the balance is set to the center

  • My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

    My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

    Apparently it's related to the Firefox plug in.
    This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
    1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
    2. Select to "Options
    3. Select "Applications"
    4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
    5. Open a test PDF. It should open in it's own window now.
    Again, not a complete solution but something that'll at least let you scroll with PDFs open.
    More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

  • It is saying my voicemail is full and it isn't. I do not want to erase my messages, but I do not know how to fix this problem. Can someone help me?

    It is saying my voicemail is full and it isn't. I do not want to erase my messages, but I do not know how to fix this problem. Can someone help me?

    heymare66 wrote:
    The phone usually can hold 24 messages before the voicemail is full, but now I have only 21 and it's saying it's full.
    I think your Voice mailbox goes by time, not # messages, so if one or two of the messages is longer, then it would be "full" faster.
    Go to youmail.com and follow the directions to set up youmail.
    Just curious - why do you need to save 20+ messages?  Once I deal with them, I delete them.... and I rarely have more than one or two \saved messages....

Maybe you are looking for