How to fix an iPad touch screen?

My iPad touch screen is writing alone and opening many task at the same time.

Hi jcr1998,
Welcome to Apple Support Communities.
It sounds like you've already done quite a bit of troubleshooting with the iPad. The article linked below will provide a few more suggestions and help you resolve the issue.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Resolution
If your device is experiencing any of the symptoms listed above, try the following steps:
Restart your device
Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
Clean the screen with a soft, slightly damp, lint-free cloth.
Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see theService FAQ for your product.
-Jason

Similar Messages

  • HT4061 how to fix the iPad with screen freeze.

    My iPad wont go back the screen the way it should be, it just like its freeze up the screen, could someone any idea to fix it.

    Give it a reset. Hold down the sleep and home buttons for about 20 seconds or so. You should see  a black screen, then the silver apple as it reboots.

  • How much is a ipod touch screen repair

    how much is a ipod touch screen repair

    Apple will exchange your iPod for a refurbished for this price:
    Apple - Support - iPod - Repair pricing
    A third-party place like the following may be less expensive. Google for more places.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Any Ideas why my two day old ipad touch screen periodically doesn't respond to touch?

    Any Ideas why my two day old ipad touch screen periodically doesn't respond to touch?

    See what you missed here:
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Ipod disabled try again in 23,087,910 minutes ... How to fix a ipod touch saying this

    ipod disabled try again in 23,087,910 minutes ... How to fix a ipod touch saying this

    Hi amandafromtheentrance,
    I see that your iPod is disabled and you may have forgotten your passcode. Here is an article that will help you address this issue:
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    https://support.apple.com/en-is/HT204306
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • My apple iPad touch screen is not responding

    My apple ipad touch screen is not responding it was working since few hours then that happened. There is no a single point on the responds to touch but everything is working on the welcome screen, detects  the Wi-Fi ... etc.
    First thing I did was passing on my local agent store. They did a soft reset what caused lose all data and apps (not a problem) but they didn't fix and asked to visit the support branch .. now i can't use the "Siri trick" and I think it's not helpful after resetting my device.
    I tried removing the screen protector but still no hope. Turned off it and cleaned the screen  but didn't help!!
    Is There another way? Any expected scenarios/time when I visit the repair branch in Egypt?
    I've upgraded to latest (7.12) 2 or 3 weeks ago

    Thanks ..
    I've mentioned that I did that now I'm in another stage, The iPad at the main reseller support department and they told me now that they will give me another in return .... the strange thing I have heard was that I have to wait 4 weeks until they get me one from Apple .. I'm i Egypt 

  • HT201406 my ipad touch screen is not working please give solution for it.

    my ipad touch screen is not working please give solution for it.
    i have connected ipad to itunes and done it restore seetings then also my touch is not working but
    when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i do

    If you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
    Regards.

  • Compared to the ipad 2 how big is the ipad minis screen?

    compared to the ipad 2 how big is the ipad minis screen?

    It is absolutely not half the size. It's the same resolution as the iPad 2 with a screen size of 7.9 inches across the diagonal versus the 9.7 inches of the bigger iPad.

  • My iPhone 4S has been frozen in the loading screen I don't know how to fix it:( my lock screen button doesn't work

    My iPhone 4S has been frozen in the loading screen I don't know how to fix it:( my lock screen button doesn't work

    Without a working lock screen button, you'll probably have to wait for the battery to go dead.  Once it doesn't wake up by pressing the home button you can plug it into a charger and it will eventually reboot.

  • HT4113 how to fix disable ipad?

    how to fix disable ipad?

    eileenfromwellington wrote:
    that doesn't work
    It works fine if you have backed up your phone. Just wipe it using your registered Apple ID and then restore it as a new device and reinstall your backup.
    Pete

  • HT1766 iPad touch screen stopped working.  Can't scroll or select any apps. Can't reboot.  Connect to PC via iTunes doesn't recognize the iPad.

    The iPad touch screen suddenly stopped working.  It's been fine, but stopped all of a sudden.  Couldn't reboot since pressing the hibernate button also asked for a "swipe" but couldn't swipe since the screen isn;t sensing any touching.  can't scroll main screen appas.  Can't connect to iTunes, says not connected.  Next stop Apple store unless someone has an idea.

    Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • In Windows10 - I have a cracked screen on my ACER Laptop Aspire. How do I turn off touch screen?

    I upgraded to Windows10. How do I turn off Touch Screen ; My ACER Aspire is cracked. ThanX!

    Hi roger,
    It appears that the option isn't available in Windows 10 as it was in Windows 8. You can try going into the Device Manager, expand Human Interface Devices and disable HID-compliant touch screen. This worked for me. I did a restart and it did not enable on it's own. In the mean time, I'm asking our content team to review and publish content as necessary.
    Hope this helps,
    Cory

  • How to repair my broken touch screen of iPhone 6 plus ?!!

    how to repair my broken touch screen of iPhone 6 plus ?!!

    Contact Apple Support and let Apple do this for you, but this is not covered in the warranty:
    Screen repair service pricing
    Repair and replacement costs depend on your iPhone model and your AppleCare product coverage. Apple will run a diagnostic test to determine whether your iPhone has experienced additional damage. If it has, or if it needs other repairs, you may need to pay an out-of-warranty service fee. Accidental damage isn't covered under the Apple One Year Limited Warranty.
    Model
    Screen repair cost
    iPhone 6
    $109
    iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5
    $129
    Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing. Pricing and terms vary for service through an Apple Authorized Service Provider.
    copied from Service Answer Center - iPhone

  • My ipad touch screen not,also reseted it. It stops suddenly and goes out of control. Need answer very quickly

    My ipad touch screen not,also reseted it. It stops suddenly and goes out of control. Need answer very quickly???????

    Try doing a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if that appears.
    If that does not help, take the iPad to an Apple store genius bar and have the techs check out the screen to see if there is a hardware fault.

  • HT4946 How to Fix: My iPad is Disabled

    How to Fix: My iPad is Disabled
    Thank you

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

Maybe you are looking for

  • Syncing iPhone 4S to a an iTunes library that doesn't have my nonpurchased on it

    Hi. My computer that had my iTunes on it died, so I downloaded iTunes on to my laptop. The new iTunes on my PC Windows 7 laptop  has all of my purchased songs on it through my iTunes Store account . Will I be able to sync my phone to my laptop withou

  • How to use the Include Statement in the BADI

    Dear All,         I am trying to implement the BADI. So i need to use the Include in the BADI. How to use the Include statement in the BADI. I cant able to use it in the Public, Private and protected statement. Where should i mention that,,,, Thanks

  • Cannot install Driver for the Creative Zen Micro Photo MP3 Pla

    I was having some issues with my player so I formatted it and tried to reload the firmware. My computer will not download the driver. When I plug it into the USB it bings and then says "new hardware" It bounces back and forth from Creative touch to M

  • AES filing error - Idoc Outbound Processing: EDI number cannot be compiled

    Hi Gurus, We are configuring the AES filing. we've done the EDI  configI and initally we got the error that EDI partner is not maintained. As per the suggestions from this Forum we've added the cusoms office details in geography tab. Now when we are

  • Authorization for ME22N

    Dear Experts, We want to restrict certain user so that he is not able to change the quantity Field in  ME22N. As most of the time Quantity in PO created by one user XYZ  is changed by other ABC, without any control. So can i control and restrict the