How to fix app download issues in iOS 5.1

Cannot update any of my apps on new ios 5.1. On wi-fi and they say waiting...just sits there. Reboot phone and even connected to iTunes. No luck. What gives? Thoughts on how to fix? Thanks

I reset my iPhone 4s to factory settings and restored from back up last night and reset the settings and I am still having issues with apps. Now one I use on a regular basis isn't working at all. I am going to attempt to get a new phone today. My wife's iPhone 4s works just fine after the update.
Is there any reason that some phones have issues and others work just fine?

Similar Messages

How can I fix app downloading issues? Can only load/update apps via sync with laptop.

I cannot download, reload,or update my Apps via Wifi. I can only accomplish this by syncing the phone via iTunes and laptop via cable. When I choose to install or update I get a "waiting" message indefinitely.

Issue solved. I found that there was a PodCast that had not finished downloading for some reason. I deleted the PodCast app and all PodCast downloads and Apps download fine now.

Please help me how to fix error 53 iphone 6 ios 8.1

please help me how to fix error 53 iphone 6 ios 8.1 when update iphone 6

Hey there fcaride,
It sounds like you are unable to finish restoring with iTunes due to this error -1 message. Usually that is associated with security software. Use the steps from the following article to help with that:
Get help with iOS update and restore errors
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
If the issue persists, I would next use the last section of the following article titled "If your device turns on but gets stuck during start up"
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
Thank you for using Apple Support Communities.
All the very best,
Sterling

HT4623 how to fix my iphone 3gs after ios 6 ?there is no sim card install in the iphone you ar attempting to activate

how to fix my iphone 3gs after ios 6 ?there is no sim card install in the iphone you ar attempting to activate

Hello James,
Thank you for the details of the issue you are experiencing with your iPhone. I recommend following the steps in the article below if you are getting the message "No SIM" when your SIM card is installed:
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/ts4148
Thank you for using Apple Support Communities.
Best,
Sheila M.

Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
This should take all the music off your phone .Then you can resync the music back on to it.
If this doesn't work maybe a restore to factory settings and start from scratch is the way to go

How to fix the Timing issue in Discoverer reports

Hi,
While running the discoverer report in Discoverer plus is taking more than 1 hour to complete( Gen.time + Extract to excel)
where as the same report completes quickly in discoverer desktop.
how to fix the timing issue in discoverer plus
Thanks
Srinivas

Timo Hahn wrote:
There is a problem with autoHeightRows and columnStretching used together in 11gR1.
Have you tried without columnStretching?
Or have you tried if it works in 11gr2?
TimoHi Timo, Thank you very much for taking time to respond to my question.. :)
Back to my question...
I tried removing the columnStretching although my requirement really requires this but no effect really happens even if I remove this.
Based on my investigation on the generated HTML, I notice the following items:
1. A table is being wrapped in a div that is being set at a fixed height.
2. On first load, if your autoheight rows is set to 6, the framework is setting a height of 96px to the div. This height would almost cut the last row of the table.
3. If you try to refresh the page or try to re-PPR the component, the framework resets it to 102px which causes the last row to be fully displayed.
My only concern is that IE is perfectly displaying this while Chrome and FF are having problem.
Based on my understanding, the framework is messing up the height only on first load. Not sure but this is how I see it. I am really not confident also on my findings
and I would most likely hear other's comment.
Thanks.

Slide to unlock doesn't work happend more than 8 time every time i had to restart my phone, Please can you tell me how to fix this bug . iPhone 5, iOS 7.0.4

Slide to unlock doesn't work happend more than 8 time every time i had to restart my phone, Please can you tell me how to fix this bug .
iPhone 5, iOS 7.0.4

Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.

How to fix applepushservice.dll issues for downloading iTunes on Windows 7 64 bit

I recently had iTunes crash on my home PC, Windows 7 64-bit. I have tried several attempts to uninstall and reinstall the program and it still does not work and I receive error messages. The latest: The program can't start because ApplePushService.dll is missing from your computer. Try reinstalling the program to fix the problem. Problem is, the articles that I have seen state this is an Unknown source and my firewall will not allow it to be installed. The original error was a Windows Error 7 (registry & .dll issues). Any suggestions on how to fix this problem?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Has anyone had app update issues with iOS 8.1?

I'm running iOS 8.1 on a iPhone 6+. If I try to update an app from the app store without being logged in, it will hang the process and the update will fail.
Previously, with my iPhone 4 and iOS 7.1.2 the app store would ask me to log in when an app update was attempted without being logged in.
The work around until apple fixes this bug is to ensure you are logged in BEFORE attempting an app update. An honest techie at the local apple store admitted this is a bug (one of many) in iOS 8.1. Has anyone else had this issue with iOS 8.1

Nope, I'm able to update an app in iOS 8.1, even if I'm not first logged into the iTunes & App Store in Settings. It prompts me to update the app, then I sign in with my password.
Do you have Touch ID enabled for App Store or not?

How to fix the troubleshoot issue code 205?

Hello i have just bought Adobe Flash Cs6 and i try downloading creative cloud but everytime i download it i get a troubleshoot error code #205 if anybody could help on how to fix this then i would be most grateful, thank you.

Creative Cloud Help / Error downloading Creative Cloud applications
http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

How to fix Action Link Issue in Table and Pivot Table when used Section

My OBIEE Version: OBIEE 11.1.1.6.5
Issue Description: Action links (Navigate to BI Content) doesn't work in PIVOT TABLE or TABLE object when used Section area (one or more columns in Section area).
If you want to recreate this issue please follow next steps:
1.     First of all you have to create one analyse with min 3 columns (for example Time.“Calendar date“, Product.Product, „Base Fact“. Revenue -> from Sample Sales Lite )
2.     From column properties -> Set value Action Link Interaction on some column for example Product.Product (choose Navigate to BI Content -> any created BI report )
3.     Click Results Tab choose Pivot Table and assigned one dimension column to Section area
4.     Click preview icon
5.     When you click on action link nothing happens
6.     If you drug and drop column from Section Area to Excluded, Table or Pivot table Area then Action Link works perfectly
How to fix this issue?
I'll be grateful for any help!

This is Bug:15922681 - ACTION LINK NAVIGATE TO BI CONTENT DOES NOT WORK WITH ATTRIBUTE IN SECTION
Upgrade to 11.1.1.6.6 will fix this issue.

On (release) action problem - how to fix the loading issue?

Hi,
I'm making a progress with the website in Flash. I have pretty much things already done. Motion tweens that change alpha in percentage ammount are working correctly - I've used them for loading pages but I encountered a one tiny problem...
Describing the website: there are buttons that - when you click - play an animation (motion tween with alpha changing) to load a proper page that is pinned with a particular button. So: home button loads the home page, bio button loads the bio page etc. All pages go with the motion tween - they fade in the website (from alpha 0% to 100%). Everything is fine and the website with everything works just perfect! But: there's one thing that doesn't keep me calm. When I open my website in a browser to test it and I click on each button to load pages - everything is ok, but when I want to click the same button few times - other things are being loaded by clicking the same button.
For instance: I click the "bio" button once and it loads my biography page with the motion tween as I described before. But when I want to click it secondly or thirdly it doesn't load my biography page anymore but a page before that one (in this case: home page). When I click it again the button loads my bio page again. So - in sum - it doesn't load the same page all the time, but randomly: the proper one or the one before (in the timeline).
My AC code for each button is simple, for example:
on (release) {
gotoAndPlay(173);
Also I've got the "actions" layer that carries stop(); command in places that are for it.
I tried with _root.gotoAndPlay and also with frame_number +1 and always the same problem.
I hope it isn't anything serrious and can be fixed.
I'll be very grateful for help.
Greets!
J.J.

As I explained in my post: I test my website in the browser (firefox), I click on a particular button which loads a particular section. It works with all buttons but sometimes when I click the button an incorrect section appears.
For example: I click biography button, and the biography section appears. Then I click contact button and contact section appears. Then when I want to see biography section again and click on the biography button, the biography section doesn't appear but the other section appears, for instance: home section, about section, gallery section or other from what I have.
Concluding from the entire description I've placed above in the topic I don't know why this thing happens and I need some help how to fix this issue of loading sections firstly correct and then, after some clicking - incorrect.
I hope I really presented it clearly.

Facetime says connecting after you answer the call but doesn't actually connect and both iphone 5s were quick reset-ted and facetime was turnt on and off, any reasons like why or how and how to fix this concerning issue

facetime says connecting after you answer the call but doesn't actually connect and both iphone 5s were quick reset-ted and facetime was turnt on and off, any reasons like why or how and how to fix this concerning issue

Apple has released a document which is reported to address the recent FaceTime issue.
http://support.apple.com/kb/TS5419

How to fix Task form issue which is not opening in browser?

Hi All,
When trying to open task form link which is in email, facing:
How to fix this issue? thanks in advance!

Paul,
My scenario is: Having a team site and a sub-site. In sub-site, created on list form associated with designer workflow which will assign approval task to a person who are not a member of this sub-site but member of team-site.
Before assign task, assign permission to that person using impersonation step like:
Add Approve to item in Current Item
Add Approve to item in Association: Task List
When click the task link which receive in email, that person facing above issue. After I add that person in sub-site site viewer group, then it working perfectly.
My question is, is it possible to give approve permission to task list by designer workflow to a person who are not a member of a sub-site?

How to fix a download error for itunes on an iphone?

How can one fix a "download error" for itunes on an iphone?

Hi..
First, try resetting your iPhone.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
Then restart the device. Hold the power button until "slide to power off" appears. Slide to power off. After it is off, press the power button to turn it back on.

How to fix app download issues in iOS 5.1

Similar Messages

Maybe you are looking for