How to fix back arrow problem which brings up old pages from days ago

Both ipad and iPod bring up sites from days ago when I use the Safari Back arrow.

On both devices, tap Settings > Safari
Tap to clear History, Cookies, and Data
Then restart both devices.
Go to several sites then try the back arrow.
If that doesn't help, try "resetting".
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
Then try Safari again.

Similar Messages

  • HT1483 Ipod froze. How to get over the problem and bring it back?

    Ipod froze and not responding. How to get over this problem and bring back the Ipod ?

    Go to the  menu/About This Mac - what OS version shows there?
    Do a backup, preferably 2 separate ones on 2 separate drives.
    Revert to a Previous OS X
    Revert to Snow Leopard
    If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

  • Can anyone knows how to fix back camera having pink lines when i use it so please help me  thank you

    can anyone knows how to fix back camera having pink lines when i use it so please help me  thank you
    <Email Edited by Host>

    You're welcome.
    The 6.1.4 update had nothing to do with this. If it did, then every iPhone with 6.1.4 installed would have the same problem.
    Apple doesn't support downgrading the firmware, which won't change anything.
    If an Apple Store is miles away, then call AppleCare.

  • How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic

    I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
    There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
    I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
    Thank you in advance guys.

    You probably should look at a more 'serious' audio interface rather than the Realtek
    Yes ASIO drivers are the way to go
    If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
    There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion

  • HOW TO FIX THE WIFI PROBLEM

    HOW TO FIX THE WIFI PROBLEM: Settings > Wifi > (little blue arrow) > scroll down to "Renew Lease" and then click on it.
    Enjoy

    Didn't work for me.
    What did work was going to the Wifi network settings and setting the HTTP Proxy to Auto rather than Off.
    Worked for both iphone4S and ipad2.

  • Guys how to fix the audio problems of my itouch? The volume bar dosnt exist and the loudspeaker doesnt work. . .Sounds only works in headset  please help thanks!!!!

    Guys how to fix the audio problems of my itouch? The volume bar dosnt exist and the loudspeaker doesnt work. . .Sounds only works in headset  please help thanks!!!!

    Post this in the iPod Touch forum.
    https://discussions.apple.com/community/ipod/ipod_touch
    B-rock

  • How to fix my converted files which come out unlegible mixed with letters and symbols?

    how to fix my converted documents which look unlegible, mixed with numbers and symbols?

    Suggest you first validate the code
    http://validator.w3.org/check?uri=http%3A%2F%2Fwww.sainttims.com%2F&charset=%28detect+auto matically%29&doctype=Inline&group=0
    The Float drop issue on the News page could also be related to invalid code
    http://validator.w3.org/check?uri=http%3A%2F%2Fwww.sainttims.com%2Fnews.php&charset=%28det ect+automatically%29&doctype=Inline&group=0
    Fix lots of similar odd code like
    <p span class="BlueType">
    which should read
    <p><span class="BlueType">\
    The code for the sidebar photos reads
    <img src="images/photos/2012DOKSpringAssembly/Bishop-Susan-Boat.jpg" align="center" width="190" height="" />
    where height="", IE seems to rendering them at a height of 0px (i.e. invisible).

  • How to fix my iPhone 5 which currently screen interfere , how can I do?

    How to fix my iPhone 5 which currently screen is becoming interference!!

    It's like the virtual is not sustainable, vibration, more horizontal stipe line on screen which block the hole screen.
    Or it's look like the TV cannot catch the broadcast clearly.

  • How to cache a content item like a Static HTML Page from UCM to Coherence/C

    Hi All,
    How to cache a content item like a Static HTML Page from UCM to Coherence/Coherence Web?
    Thanks

    Hi,
    Could you explain your use case in more detail?
    It does not look like proper use of coherence to cache static content - it more suited for dynamic content like user session etc.
    Adam

  • I refund a New iPad which was purchased by cash 15 days ago, but I did not receive my refund check. and my receipt can not find, what should I do?

    I refund a New iPad which was purchased by cash 15 days ago, but I did not receive my refund check. and my receipt can not find, what should I do?
    I still have the confirm receipt for purchasing the ipad, but my refund receipt can not find.

    Seventy one is correct, you need to take this up with the manager of the store.
    Ultimately, if the guy who handled the return at the store didn't enter it into the system correctly, or if the paperwork was somehow lost, or anything else along those lines, your refund receipt is the only thing you have proving that they owe you money. If you have lost that receipt, it's quite possible that you will have lost the money that it represents.
    Go to the store. Talk to the manager. Try to recall which person at the store handled the return, and see if they remember you. Be polite but insistent, and remember that without the receipt, you are depending on those people to help you out.

  • TS3899 Set up email on my iphone 5c and now it is downloading every email I have ever received.  Even old emails from months ago, how do I make it stop?

    Set up email on my iphone 5c and now it is downloading every email I have ever received.  Even old emails from months ago, how do I make it stop?

    When creating an antiquated POP account with a new email client, all received email that remains at the incoming mail server is downloaded as new and unread email.

  • After I have finished at a site and want to go back to the start page the "go back arrow" does not show the start page how can I fix this

    I am using Fire fox 3.6.15 which was updated on the March 6th.
    The Start Page will open and allow me to go to any site but when I want to return to the Start Page via the 'go back arrow' the Start Page is not listed.
    I am wondering if it is part of the new upgrade.

    It's actually not hard to fix. I had the same problem on my Bold 9700. You need to go to the main desktop on your Blackberry, and find the Messages icon (it looks like an envelope - same-looking icon as your email icon). Click on it, then scroll thru the messages. You'll find a message with same annoying little yellow circle icon, and the URL of the web site you tried to access when your Blackberry powered down. Click on the URL, and let your Blackberry load that web site. Voila! After that, the Browser Notification Icon will have disappeared.
    I wish that future versions of the Blackberry OS will alow you to click directly on the notification icon and get taken to the relevant app (as happens in Windows). As is stands, the notification icons are more annoying than useful.

  • I've no idea how to fix my service problem ?

    So a day or so ago my phone was having troubles finding wifi so I turned it on and off of airplane mode, it found the wifi , but soon after my service depleted ... I turned my phone on and off but the service did not return , I then reset the network settings and I had service again ! But only due to 3G which my plan doesn't cover so it had to be turned off ..I still have no service and I can't figure out how to fix it. So if you could tell me how that would be lovely !?? One more thing ..does 3G cost money , if it's not in your plan, but you are connected to wifi ? With 3G my phone gets 3 bars but without it goes to one bar immediately and then says "searching /no service " soon after
    I also don't know if I'm posting this in the right place or again, sorry :/

    It's hard to say what the problem is, but if you are concerned about data charges from using 3G you can turn off cellular data in Settings > Cellular to eliminate all doubt. Slide Cellular Data "off". That will constrain your data connection to Wi-Fi only.
    Have an Apple Store evaluate your iPhone.

  • How I fixed my conection problem

    Here's my setup:
    Wireless IP (Motorola canopy)
    The connection comes into the house as ethernet (I'm conected wirelessly to the ISP's router and it's using DHCP
    That's pluged into an airport express that acts as a bridge to the ISP's router
    iMac G4 wireless
    Windows xp notebook wireless using a Netgear PCMCIA card
    Son's XP desktop using a DLink internal wireless card
    Symptoms:
    This worked but after several hours the airport express wouls stop forwarding the new DHCP info. The green light was On but I could not connect to the internet wirelessly.
    Here's how I fixed it:
    I turned off ipv6 in the network settings. I had it set to Automatic. When I turned it off It has worked like it is suposed to.
    I hope this helps someone.

    The fact that you saw no glitches while running Logic before applying the update means almost nothing because that uses only a small subset of system resources. Far more significant is that Safe Mode restored some missing functionality: because it disables non-essential items like user fonts, third party drivers, & so on, it points to problems in those areas.
    Equally significant, the fact that there are relatively few reports of post-update problems among the several million Snow Leopard users points away from the update itself as the cause of your problems.
    Separate & apart from that, it so happens that I'm a sound engineer/system designer/board operator with nearly 40 years of professional touring experience. FWIW, I never have & never will update the software of any system I must rely on professionally (whether it is running on a Mac, a PC, or dedicated hardware) unless & until I can thoroughly test it first and I have a trustworthy backup/recursion strategy to fall back on in case of problems.
    I strongly suggest you learn from your unpleasant experience & do the same. I have had far fewer problems with Macs than with PC's, but nothing is 100% reliable to begin with. Changing the OS software part way through the tour is just asking for trouble, no matter how reliable that has been in the past. Even if the budget allows for nothing better than a stack of burned CD's & a couple of consumer grade CD players, no professional tour can afford to be without some fallback strategy in place. That should be self-evident & require no warning from Apple or anybody else.

  • How to fix exclamation mark problem

    Basically since I updated to iTunes 11 and I went to make a new cd to listen to in the car a lot of my songs have got an exclamation mark next to them and says it can't find the original file so since I HATE the new iTunes i decided to downgrade back to iTunes 10. what ever it was before the update came out to see if that would fix the problem but no that didn't work, so I've since been looking all over Google to try and find a solution to this but everything I found was mostly about moving the iTunes library and how to fix that problem but in my case that isn't the problem at all as I haven't moved the library anywhere, I did find a post about transferring purchases from my iPhone to iTunes so I did that thinking it would fix the problem as all the songs that have the exclamation mark next to them are on my iPhone and play back perfectly fine but iTunes would only transfer my app's not my music, is there a way to change this? Or if anyone else knows how to fix this problem in a different way I would very much appreciate the answer to this problem as it's driving me insane!
    Thanks in advance
    Jordan

    This happens if the files are no longer where iTunes expects to find them. Possible causes are that you or some third party tool has moved, renamed or deleted the files, or that the drive they live on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use CTRL+I to Get Info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes. See this post for a detailed explanation of what the script does.
    If your media is scattered around you may need to repeat the search using each of the different locations where you have stored things.
    tt2

Maybe you are looking for

  • My 4th generation nano is no longer associated with my account

    I completed the trouble shooting steps suggested by Apple but my nano is still not an associated device under my iTunes account.  I have no idea how to fix this! Pls help!

  • How to set MTA to accept mails from hosts on INTERNAL_IP only?

    Hello, I would like to config a messaging server with: - this mail server will accept incoming mails from hosts on INTERNAL_IP list only without authentication. - this mail server will accept to send mail for clients with SASL and TLS only, which mea

  • Embed a QT mov or Drag & Drop a QT mov?

    Hi, I'm wondering that which is the best way to put in a Movie into iWeb? Embed a QT mov or Drag & Drop a QT mov?is both are the same thing?

  • Year out of range error running ODI APIs on WebLogic

    We are running ODI APIs on WebLogic to execute scenarios previously built using ODI Studio. Getting error: oracle.odi.runtime.agent.ExecutionException: Session Failed :3044 : 17268 : 99999 : java.sql.BatchUpdateException: Year out of range.17268 : 99

  • What is the standard for audio balancing in FCP?

    Hi Guys, I am cutting a feature film shot on DVX 100, they used boom mic to capture the audio, the sound man control the sound around -18, however, the boom mic captured dialogus with the ambiance sound as well, for some particular outside scenes, th