How to fix blurry access screen and enlarged background picture

Since upgrading to iOS7 my pictures on access and background screens are enlarged and blurry. I have tried to downsize this, but this is not possible. It is only possible to enlarge them further. Has anyone already found out how to fix this? Thank you.

Make sure the lens is clean. Your is the first report i this forum a such a problem. If still problems:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

How do I fix the gray screen and non responsive cursor after iMac sleeping?

How do I fix the gray screen and non responsive cursor after iMac sleeping?

If you're running OS X 10.8.5 or earlier, then from the menu bar, select
 ▹ System Preferences... ▹ Accessibility
If the checkbox at the bottom marked
Enable access for assistive devices
is checked, uncheck it and test.
If you're running OS X 10.9 or later, select
 ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.

My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

My FaceTime isn't working properly. Every call I make a black dot appears on the camera in the middle (fixed onto the screen, and is not dirt), and the calls always fail. It would ring 6 times and then say call failed. How can I fix this?

If FaceTime ever worked properly for you, restarting your modem (and separate router/wireless if you have such) may help. If the problem continues, try connecting at a different location to see if the problem is within your wi-fi.
The black dot problem may mean you need to reset your iPod. If that does not help, it may need service by an Apple Authorized Service Provider.
If you need help with any of these suggestions, detailed help on each topic is available via Apple's Support pages:
http://www.apple.com/support/ipodtouch/
Message was edited by: EZ Jim
Mac OSX 10.7.3

TS3367 When using facetime I only have three quarter of the screen and not the picture of myself how do I fix

When using facetime I am only getting three quarters of the screen and the small picture of my end is not showing. How do I fix?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

How do I fix a blank screen and a series of 3 beeps in Snow Leopard at start up?

How do I fix a blank screen and a series of 3 beeps in Snow Leopard at start up?

http://support.apple.com/kb/ht1547. Step one is to run the Apple Hardware Test suite, extended tests at least twice, followed by Rember.

I have two companies sending me indesign documents. One opens up and the dictionary is set to English. The other file opens at is in Hebrew, Not sure how to fix the Hebrew part and whether or not the fualt lies at my end or at the other end

I have two companies sending me indesign documents. One opens up and the dictionary is set to English. The other file opens at is in Hebrew, Not sure how to fix the Hebrew part and whether or not the fault lies at my end or at the other end

If only the language is Hebrew, you should correct it in the Paragraph and Character Styles.
But in such a case I would expect more problems.
If you are a creative cloud subscriber you should additionally install the InDesign version, English with Hebrew support:
Go to the preferences of you CC.app. It is found behind the Gear Symbols on the top right.
When the preferences open, go to the Apps section.
Change the App Language to English with Hebrew support.
Now you can install it. It will install on the very same place where your InDesign program is found some additional plugins, which will give you access to Hebrew functionality, like RTL text. Otherwise you will inherit in the document (and where you copy and paste it from such a document into another one). But now you can change or repair problems.
Now repeatstep 1 + 2, but you need not to install your own language again. InDesign will now, when started, run in the language of your OS (when you have it installed in that language) but with more functionality to handle problems with Hebrew documents.
The same steps you would have to do with Arabic or Asian documents. These languages will also add more plugins. But keep it limitted to those language you need. I have installed it that way, because I get sometime documen where the text flows the wrong direction or the numbers come up in Farsi digit, not in Arabic digits. For such purposes I need versions in languages I don’t understand myself.

I went in you tube and watched videos on how to fix my headphone jack and its not the headphones cause when I look inside I see this little white costing in there I think that's the problem how can I fix it

I went in you tube and watched videos on how to fix my headphone jack and its not the headphones cause when I look inside I see this little white costing in there I think that's the problem how can I fix it

- Try cleaning out/blowing out the headphone jack. Make sure that y do not leave any foreign material or leave anything in the jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

How to fix Iphone 5 screen froze during IOS 7.1.2 update

How to fix IPHONE 5 screen freeze during IOS 7.1.2 update

My iPhone 5c froze during the update as well. I was connected to power and WiFi as well! Unfortunately it is my work phone. This could be a long day!

HT5312 So I have a problem with iTunes not letting me download anything without first responding to some security questions which I don't remember setting up, how can fix it? Oh, and it won't let me reset the questions either!

So I have a problem with iTunes not letting me download anything without first responding to some security questions which I don't remember setting up, how can fix it? Oh, and it won't let me reset the questions either!

If you mean that you aren't getting the reset link, then from the page that you posted from :
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so.
You can contact iTunes Support in your country via this page : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

Hi, I am trying to download IOS7 to my ipad. The programme has locked at the 'Choose a Wif-Fi network' page, a box says 'joining other network' but the page is greyed out and can't move from it. How can I clear this screen and finish the download. Thanks

Hi, I am trying to download IOS7 (not sure if it's 1 or 2) to my ipad. The programme has locked at the 'Choose a Wif-Fi network' page, a box says 'joining other network' but the page is greyed out and can't move from it. How can I clear this screen and finish the download. Thanks

Hello Den53,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430?viewlocale=en_US
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
After the device has turned off, press and hold the Sleep/Wake button until the Apple logo appears.
Best of luck,
Mario

I reset my phone and it now receives calls that were meant for my husband. I know how to fix this with messaging and facetime, but can't seem to find how to make it stop with the calls. Please help.

I reset my phone and it now receives calls that were meant for my husband. I know how to fix this with messaging and facetime, but can't seem to find how to make it stop with the calls. Please help.

It may be due to Continuity
The following quote is from Connect your iPhone, iPad, and iPod touch using Continuity
Turn off iPhone cellular calls
To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls.

I am trying to connect my mac book pro to the tv via a mini display port and a hdmi cable, the only picture that is on the tv screen is the background picture on my computer, any suggestions?

I am trying to connect my mac book pro to the tv via a mini displayport to a hdmi cable, the only picture on the tv screen is the background picture of my mbp, does anyone know what I need to connect to my samsung tv ?

Hi there. I also bought an iWires mini Display port to HDMI cable and have an LG LED/LCD TV. I plugged it in to my MB Pro and followed the very small writing that came in the package and got both audio and video going. You need to change the audio settings from within System Preferences on your Mac to select your TV as the audio output.
My concern is the data latency - do you experience a delay between moving your mouse on the MBPro and the TV displaying the movement? It is only a fraction of a second, but certainly enough to be annoying, especially in a cable as expensive as the iWire.

In putting together a book I can move photos onto a page and enlarge the picture but is there a way to reduce the picture size? some cases I want a smaller picture and if I change the size of the picture box I only get a portion of the image. I wnt to red

picture size...in putting together a book I can move photos onto a page and enlarge the picture but is there a way to reduce the picture size? some cases I want a smaller picture and if I change the size of the picture box I only get a portion of the image. I want to reduce the image to fit the size of the box.

If you right click on the image on the page in the context menu select photo box alignment and then select one of scale to fit {centered, Left-aligned, Right-aligned}
That should do what you are loking for.

How do I lighten a black and white background photo so I can print text on top of it?

How do I lighten a black and white background photo so I can print text on top of it?

Enhance menu>Adjust lighting>Brightness/Contrast

Nothing is visible on my screen, except my background picture and the cursor (not even the menu bar)

When I wanted to turn off my macbook pro, the menu bar disappeard. There's nothing visible on my screen except my background picture and the cursor. I can't even turn off the macbook with the on/off button.

I already held it for about one minute and nothing happened.. it's like i'm not doing anything..

How to fix blurry access screen and enlarged background picture

Similar Messages

Maybe you are looking for