How to fix Boot Camp partition that won't boot

Soooo...coming new to this thread, after reading of it on NERDR.COM.
Have new iMac 27" and have been TRYING to load and use Win 8.1 Enterprise (MSDN) on BootCamp in Mavericks 10.9.3.
Could not even get setup to load until after I removed my three external G-Drives, finally got it to load, and actually got Windows pretty much configured and activated, and loaded Office 2013 and VISIO. But, I have an increasing number of BSOD (I assume it is) issues with kernel_security_check_failure which stop the computer, nothing works, and I have to power off. This has caused drive issues, and while I've been repairing them, I can no longer boot into Windows. Tried repairing that with the original Win 8.1 DVD, but, Automatic Repair can't fix, and I was unsure if using BootRec was a good idea?
So ran the three SUDO commands on my Drive 0, and here are the results (had to paste a screen shot, as, SOMETHING in the middle (blue) text won't allow me to post it):
Question is, should I go ahead and use the gdisk utility to repair things, or...something else?
And...if there is some kind of issue with using Boot Camp when you have external drives attached, what can be done to get around that?
Thanks!

The fdisk output shows that it is a single GPT disk. Has any disk manipulation been done, like resizing or repartitioning.
Your GPT looks correct. If you create a Hybrid MBR via gdisk and include partitions 2,3 and 4 and make 4 bootable, does Windows partition show up in Startup and as a separate volume in Finder?
Please see https://discussions.apple.com/thread/5641066 for Hybrid MBR creation.

Similar Messages

After Boot Camp partition, iMac no longer boots

Hi, I have a 20" iMac Core Duo (the first Intel Mac off the line) running Snow Leopard 10.6.4. I ran the Boot Camp Assistant to partition my hard drive, and it successfully created the "BOOTCAMP" drive. When it asked for my installation CD, I tried loading a Windows installation partition through a USB hard drive, but the assistant would not recognize it as an install disk. So, I closed out of the assistant early, leaving the Boot Camp partition in place. Eventually, I rebooted my machine in an attempt to boot directly from the USB drive and resume installation.
However, I found the machine will not boot at all. It powers on normally, makes the startup sound, but after a few seconds I'm left with just a flashing folder and question mark icon. Holding down Option-key at startup does nothing. Trying to boot from my Snow Leopard disc by holding down C or D during startup does nothing. Holding down Command-S does nothing. Holding down Shift-key does nothing. Resetting the PRAM does nothing.
What can I do? Is there some way I can access the on-board EFI to make sure the correct startup disk is selected? Why am I unable to boot from my CD drive?
Thanks for your help, everyone.

On OSX go to System Preferences the Startup Volume and reset your Windows 7 partition to be the default.
On the next reboot it should automatically boot into Windows.
A PRAM-reset http://support.apple.com/kb/HT1895 can be the cause of this behavior.
Stefan

How to fix an ipod shuffle that won't turn on or charge?

I have an ipod shuffle 4th generation. Plugged it in but took it out without ejecting. Now, it won't recognize in itunes and won't charge or turn on. What can i do to fix this? I have the latest itunes and I have reset the shuffle several times.

Hello jmarie1230,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Device not recognized in iTunes for Windows - Support - Apple
support.apple.com/kb/ts1538
iOS: Device not recognized in iTunes for Mac OS X - Support - Apple
support.apple.com/kb/ts1591
Best of luck,
Mario

How to restore from hard drive that won't boot?

My Macbook Pro recently started hanging at the grey boot screen, and the hard drive was replaced under Applecare. I've got the old hard drive in a USB enclosure now, and everything on it seems to be readable despite it refusing to boot from this hard drive. Disk utility reports no problems. Is there a way to restore the files and applications from the old hard drive onto the new hard drive? I presume I can't just make a new time machine backup from the old hard drive and restore that?
Thanks

Try the migration assistant:
http://support.apple.com/kb/HT4413
If that doesn't work, you'll have to use a data recovery tool:
https://discussions.apple.com/docs/DOC-1689

How to fix a song glitch that won't play?

I'll try to keep this as brief as possible. I had to restore a backup because I accidentally deleted some photos. Ever since then my most recent iPod purchases will either not play or skip themselves whenever I try to play them. Long story short most of the content in my iTunes library are cd downloads, which I won't have access to for awhile, so for the time being the only songs I can re download are the ones purchased directly from iTunes. Is there a way to fix the download without the use of my computer and potentially erasing the rest of my library?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup, yes try again. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

How to uninstall boot camp partition?

How to uninstall boot camp partition?

Use the Boot Camp Assistant and follow the menus to remove an existing Boot Camp partition and return your computer to only OSx. Adding or removing a boot Camp partition is performed using Boot Camp Assistant.

Creating and restoring a Boot Camp partition using Paragon

I am trying to restore a clone of the Boot Camp partition that's on my MacBook Air (Snow Leopard) to My MacBook Pro (Lion).
I was told I could do this without requiring the Windows 7 installation disk by using Paragon Hard Disk Manager.
I downloaded the Paragon Hard Disk Manager on the MacBook Air in the Windows partition and followed the steps the Wizard told me. I chose back up. I successfully backed up the Boot Camp partition but noticed that the amount of disk space on the back up external drive was about 8GB, but the amount used up by Boot Camp was 16 GB.
When I went into the new computer and tried to create a Boot Camp partition, I am not able to do this without installing Windows software.
When I plugged in the external drive which had the back up on it, it just has some files and no Wizard I can use to restore the Windows partition.
So I think I've done it wrongly.
When I first started the wizard, there was a choice of making an image. I did choose this initially and a message came up and said I had done this but there was nothing else - no information about where this image was and what I should do with it. So I chose "Back up" and that is where I am.
Even if I do manage to create an image that contains everything, the operating system and the files, how can I restore that to the newly created Boot Camp partition on the other computer if in order to create the Boot Camp partition I need to install a Windows 7 disk?
It's not that I don't have a valid Windows 7 installation disk, I do but I have to call telephone support to install it because the activation is tied to the first laptop which has issues and needs to be repaired and that's why I am doing the migration of the data. And it's inconvenient to do the telephone thing because it's after hours now and I want to get the clone of the Windows partition before I send off the computer for repairs which I am supposed to do tomorrow morning.
Plus, I am not sure by using the Windows 7 installation disk and migration of data method that I will have the partition looking exactly the same as before, and that's very important for me because I do internet banking with a foreign bank and it took ages for them to set up the internet banking on my computer, and I am worried that internet banking won't work if I do not have an exact clone of the Windows partition.
I can go back again and try making an image disk but I still have the problem of using the Paragon program which is a Windows program on the Mac operating system, which I have to use when I am creating the Windows partition. Is there other software from Paragon that I am supposed to get?

Paragon didn't work for me and their support is quite lousy. I think I just threw $50 away.
I didn't need another activation key to install Windows 7 on the second computer (MBP). The boot camp installation went smoothly. Once in Windows, I downloaded the software again, Paragon Hard Disk Manager, and then chose "restore". It didn't recognize the archive I had made on the external hard drive no matter what I did. I had to give up after a few tries.
So I went to the Paragon website to look for answers in the support section.
They do not respond to emailed support questions for up to three days after you send in the question even if you are a new customer.
I am tempted to ask for a refund because they have false advertising claiming that their product works when it doesn't.
The steps are not that hard to follow if you use their Wizard and the Wizard told me that I had done everything right and that I had created an archive and I named it and everything.
When I went to restore it, nothing. I couldn't even eject the volume. Very strange.
Their FAQ on Support site is unhelpful and full of technical terminology. Nothing pertains to my problem.
I really don't want the headache. Besides if all I wanted was to do a backup I could have used the free back up and restore utility in Windows 7 which is meant to be excellent.
Another Apple Support Discussion member said they had a similar problem, a problem with the archives, and that even after working with Paragon for seven months, it was still not resolved.
After a certain period of time after you've bought the product, you have to pay $50 to get support. It's not worth the bother.
It's a German company and German companies in general are not big into service. I can tell that this is true with this company.
So having been burned, I really do not want to keep going down this path. I really just want my money back.

Daily Backup for Boot Camp partition

I'm looking for a Windows software to perform daily incremental backups from my Boot Camp partition to an external USB drive. It should also be possible to restore the COMPLETE Boot Camp partition from that backup in case of a hard drive failure. (It's NOT necessary that various versions of files are kept around-the-clock like Time Machine does. It's also not necessary that the backup itself is bootable.)
I've tried Genie TimelIne, but unfortunately it wasn't able to manage a complete restore. The taskbar was missing, no applications were installed (only present), settings were missing after the restore..., so I had to manually install nearly everything.
I've heard "Macrium Reflect" should be better. Is this true or does anyone have another good tip?
BTW I'm not looking for a solution to backup from the Boot Camp partition to the OS X partition and I don't want to create a complete clone every day.
Thanks for your help!

coxorange wrote:
A bit difficult to test such a software including worst case recovery if you can't dispense with the concerned computer temporarily. And VERY time-consuming!! Hence I asked for personal experiences.
Well, Anyone elses personal experience won't mean much to you unless they have the same setup as you, so asking others for personal experience is as much of a crap shoot for you as doing it yourself. I went through lots of testing several years ago on my first MacBook Pro, but almost none of that testing is valid for my current machine. With the variations in machines, and machine configurations, what works for someone else might not work for you, and what might work for you might not work for someone else. I learned this when I was testing Colnexzilla as a possible backup/cloning tool. It worked fine on my MacBook Pro, but wouldn't work properly for a number of other users.
coxorange wrote:
What do you mean I'm confusing?
I always wrote about the Boot Camp partition.
I agree that what you are asking for seems rather confusing. You talk about backing up your data on your Windows partition, and you talk about performing incremental backups. The WIndows 7 Data backup utility it perfect for tasks like that. It's when you start wanting to perform disk image backups, and then ontop of that perform incremental image backups of your Windows partition that things get challenging and confusing. Since you aren't clear about what scheme you want to use, it is hard to answer with a "clear answer" and not get confused by what you seem to be asking.
coxorange wrote:
As far as I know that's not enough to perform incremental backups including EVERYTHING on the Boot Camp partition.
If you use the Windows 7 data backup and perform incremental backups, you will have a backiup of all your data from the Windows partition. Isn't that want you want? If you want to perform a restore, it will not restore you back to a bootable drive, but it will have all your data and files backed up. If you want to perform a partition backup image, and make those backups incremental nightly, it might be possible. Since you are talking about a Boot Camp partition on a Mac here, you also need to clarify if you want this backup to run when teh system is booted into Windows, or when teh system is runnign MacOS, or ifit is acceptable to boot from yet another media for the backup purposes.
At this time, I'm not sure that any software exists which can make backup image of your Boot Camp/Windows partition when runnign MacOS that will make a backup image that cna restore to a bootable volume and can do incremental backups. There are few, if any backup tools that will run runder native Windows on your Boot Camp partition that will make an image file backup that can do incremental backups, and also allow you to restore to a bootable partition. I beleive that the Paragon software is one of the very few that can do this. I have tried and successfully made backupns and restores from backup disk images using custom boot drives for CloneZilla, and the Paragon Drive Backup tool. I don't believe that CloneZilla will do inremental backups, and I'm not sure about the Paragon software as I stopped using Boot Camp about 1.5 years ago when I upgraded to my current MacBook Pro. Now with this system, I don't run native Windows, I only run it virtualized using Parallels Desktop and VMWare Fusion. For both of those, I get a full system backup with each MacOS backup I take, since the Windows File System is virtualized and stored entirely in files on my MacOS partition.

Want to upgrade Windows and migrate to a new Boot Camp partition

I'm a dedicated Mac user who must on occasion use Windows at work.
Knowing that it's always best to make changes one step at a time, I'm looking for recommendations before embarking on a multi-step upgrade and migration:
CURRENT SET-UP:
MBP 2009, Core 2 Duo, 3.06 gHz, 8Gb RAM, 500 gb hd
OSX Lion10.7.1
Parallels 7
Windows XP SP2
No Boot Camp Partition
GOALS:
Create a Boot Camp partition and migrate Windows to there
This will allow me to keep all my Windows files in one place and have access to them regardless of whether I boot into Windows natively via Boot Camp or via a virtual device using Parallels
Upgrade to XP to Windows 7 using Windows 7 Pro Upgrade for Vista
I bought this as a pre-release two whole years ago
Hey -- was told then on the MS web site that this path would work...
Use iCloud to sync my Apple stuff with my Windows stuff (Calendar, Contacts)
I currently do this successfully via MobileMe and Outlook Exchange
However, iCloud requires that syncing with Windows requires Vista or newer (so gotta go to Windows 7, 'cuz ain't going Vista)
Migrate all my Windows applications and files without having to do clean installs
I know, clean installs are always better
However, IT support at work is always overloaded, so I choose this route for now
Also, I regularly use Super Duper to back-up (clone) my internal HD -- and have restored a number of times, always successfully -- so that necessary step is well covered.
Any recommendations?
Thanks in advance.

I ended up deleting my WinXP partition and the upgrade to OSX 10.7 went fine.

Repairing Boot Camp Partition

I just installed VMware Fusion 3. Upon my first launch of it, it came back saying my Boot Camp partition (which I had installed a year or two ago to use with Parallels) was damaged. What do I do from here to repair my Boot Camp partition?

Run chkdsk; boot from Windows DVD...<</div>
Sorry, in English? What's chkdsk? Once I boot from the Windows DVD, what do I do then?

How do I write to my boot camp partition with Paragon NTFS that comes with Mountain Lion? Or how do I get my boot camp partition to show up in Paragon's "Available NTFS partitions:" panel like my external hard drive does?

I've just set up boot camp on my MacBookPro with a freshly installed Mountain Lion and Windows 7.
I would like to read and write in both directions from drive to drive if possible. I've hunted around quite a bit to try and work this out, and so far I understand that one can write to or transfer files from one drive to the other with Paragon NTFS among other softwares.
I noticed when I looked in my system preferences the utility "Paragon NTFS for Mac OS X" came with Mountain Lion and it will recognize an external hard drive when I have one plugged in under "Available NTFS partitions:". However, it does not automatically recognize my NTFS boot camp partition nor does it automatically give me write access.
Is the Paragon NTFS that comes with Mountain Lion limited in some way?
Do I still need to purchase and download the software of the same name from Paragon to get the full write privilidges I want or is there something I can do to get the version of Paragon on my MAC to recognize and give me write priviledges to my boot camp partition?
I'm open to all suggestions to get the read / write access between partitions in my boot camped drive.
MacFUSE is also listed in the System Preferences of my machine (it also came with Mountain Lion), if that helps. I'm still working out exactly what each of these is supposed to do and how I can use it to accomplish the task at hand.
My boot camp drive does appear normally in other contexts and in disk utility it indicates that the drive is mounted.
Thank you for any guidance you can give me.

Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
I would assme Paragon is limited. Try their site and knowledge base?
MacDrive
http://www.mediafour.com/updates/macdrive
Paragon HFS
http://www.paragon-software.com/home/hfs-windows/
Paragon NTFS
http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
http://www.paragon-software.com/home/ntfs-mac/

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?
I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?

Ouch, well there is a problem.
This is the stack of partitions on your old drive
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
This is the same stack on your new drive imaged from the old one.
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
Emtpy Space (100GB say)
This is what you want
EFI (hidden)
Lion (100GB say)
Bootcamp (100GB say)
Lion Recovery Partiton (hidden)
EFI has to be at the top of the drive and Lion Recovery has to be at the bottom of the drive.
And you only have four partitions.
You can't move the Lion Recovery Partition or Bootcamp partiton, however you can expand the Lion Partition into empty space below it. (but can't delete or move the Lion Recovery partition)
Your Duplicator duplicated perfectly, too perfectly Likely would work with same sized drives/partitions.
This is what your going to need to do.
You need to move the Bootcamp partition to a blank external drive using WinClone and disconnect. This is so you have two backups of it. (one on your old 500GB drive)
You will need a drive enclousre or IDE/SATA to USB adapter cable for the older 500GB drive and option key boot from it. (some enclosures can't be booted from so check first Other World Computing is good place to ask)
Download the free Carbon Copy Cloner, grab any new files off the new 750GB internal drive to the old 500GB your booted from.
Open Apple's Disk Utility and Erase with Zero option the entire internal 750GB drive and let it rip, this will map off as many bad sectors and improve reliability.
Now use Carbon Copy Cloner to clone the 500GB Lion + Lion Recovery Partitions to the internal 750GB, it will "fix" things and place Lion Recovery at the bottom of the drive where it belongs, give all the extra space to OS X Lion.
Next your going to have to follow WinClones instructions to restore your Bootcamp, likely you will have to recreate the Bootcamp partition first (in Bootcamp) to the size you want and then clone. Likely Winclone may "fix" Windows to recognize it's in a new larger partition now. I don't know you'll have to check as I haven't used it.
When Bootcamp creates the partition it will place it near the bottom next to the Lion Recovery Partition.
As you know you will have to re-validate Windows with Lord Redmond or it expires as you changed the hardware.

How do I back up my Boot Camp partition to external firewire drive?

I have a 15 GB Windows XP Boot Camp partition (FAT32). I want to back it up to a 120 GB external Firewire drive. (I know the backup won't be bootable). In OX X Disk Utility, I formatted the external drive as MS-DOS (FAT). I planned to do the backup using the Windows Backup utility.
However, when booted into WinXP, Windows will not recognize the external hard drive. I thought I might need to create a FAT32 partion of 32 GB or less on the external drive, but I apparently can't do this in OS X or Windows (since Windows doesn't recognize the drive).
Any suggestions on how to backup the Boot Camp partition will be appreciated. I'm mainly interested in preserving all programs and data. Ideally, a clone could be created that could be restored back to the original partition in bootable form, but from studying this and other forums, it dosn't seem to be easy to do this for a FAT32-formatted volume.

My goal was to create a bootable clone of my FAT32 Boot Camp partition, while at the same time increasing the size of the partition from 15 GB to 32 GB if possible. This is what I did:
1. As suggested in this thread, I used Disk Utility to create a disk image. I formatted it as MS-DOS (FAT), and made it 32 GB in size.
2. Used the Finder to copy all files from my 15 GB Windows XP partition to the new disk image.
The following steps were only to determine if the disk image is a viable backup:
3. Removed the internal hard drive with my original Win XP partition, and installed a new internal hard drive.
4. Used Boot Camp Assistant to create a 32 GB Boot Camp partition on the new internal drive.
5. Inserted my Win XP installation disk and started the Windows installation. Formatted the new partition as FAT32. (I used the long rather than the quick format method--not sure if this was necessary.)
6. Continued the Windows installation to the point of restarting the computer, at which time I used the Option key to boot back into OS X.
7. Used the Finder to copy all the files from the 32 GB disk image to the new Boot Camp partition. (This overwrote a few Windows files installed by the aborted Win XP installation.)
8. Restarted and used the Option key to select the new 32 GB Boot Camp Partition. Windows booted as usual with all files, programs, etc. from the original 15 GB partition. Windows did complain about "new hardware" and required a restart, but all appears normal.
This indicates that the disk image containing all the files from my original Boot Camp partition is a viable backup, and can be used to restore the partition if necessary. I'm not sure if formatting the disk image as MS-DOS (rather than Mac OS extended) was necessary, or not.

How to enable VT-x for Win 7 boot camp partition MacBook pro?

I am trying to install HAXM to accelerate my android emulator, but I am having problems. I have a Win 7 bootcamp partition in my Macbook Pro, and when I am finishing the installation a message pops up saying that my VT-x is not enabled, the problem is that I can't access the BIOS to turn on the virtualization easily like a PC user, How to enable the VT-x for Win 7 boot camp partition?
The VT-x is running beautiful in my macintosh partition, but I can't understand why in my boot camp partition the VT-x remains disabled.
My processor is a Intel Core I5-2435M , I downloaded the intel processor identification utility, and my processor supports the virtualization tech and hyper-threading tech.

You can return that Mac for a full refund if it is less than 14 days from date of purchase.
themsbg wrote:
I have the same problem. Have you figured this out yet? I just bought a MacBook Air 2013. I thought I would be able to use Virtualization because it has a supported processor, but now it won't work in Boot Camp.

How do I make a clone of the Boot camp partition?

My MacBook Air (10.6.8) is having problems and I need to send it away for repairs. Before I do that I want to make a clone of everything and put it on my new MacBook Pro (10.7.2)
I am making a clone of the Mac partition using Carbon Copy Cloner. That has worked well as a backup for me.
The only problem is I need to make a clone of the Boot camp partition (Windows partition) and I don't know how.
I want to make an exact clone so it has all the operating system, files and everything.
The other question is when should I make a Bootcamp partition?
Should I migrate the clone to the new mac using Migration Assistant, and then make a boot camp partition? And then what are the exact steps putting the clone onto the boot camp partition?
Thanks for any help.

Here are some previous coments made on this forun regarding backup of a Boot Camp partition. I use Paragon HDMSuite 2011.
Casper 6 does seem to work;
WinClone was handy for XP users but doesn't for instance check for errors during the backup only during restore. Winclone was discontinued at 2.2, all 2.3 versions are hacks (removal of the OS check seems to be the main thing) There has been no deveoplment or support for a while now.
Acronis 2011 w/ plus pak, didn't work well previously
Ghost 15 - probably not
Casper 6 works for Windows on Boot Camp only
CopyCatX is more lengthy and sector copy so takes the longest.
Paragon Hard Drive Suite 2011 because it works great
and they have CampTune
Windows 7 system backup and restore - Apple's goofy HFS read-only interferes with system and file backup.
I have also used Casper, Clonezilla and Paragon but less regularly, Casper failed a few times, I stopped using it, Clonezilla worked but took forever (for me) Paragon (which I have only used twice) was the best but my sample is limited.
I have restored from DU, CCC, SuperDuper and TM, they all worked, TM was slower but not a lot, you can boot from the others, which I prefer.
HDM 2011 can do either offline or online backups, the difference is that with an offline backup, the entire partition (or disk) is unallocated. In an online backup, the backup utility is running against a partition that may be making changes to itself. When you run CCC or SD! in OS X, you're running an online backup. However, I would recommend (at least for the first backup) that you boot from the HDM recovery CD to do an offline backup. This will ensure that you have an *exact* copy of the parition/disk.
Since this is you first time backing up your partition, I would suggest using one of the Backup Wizards. They'll guide you through the backup process and keep you from doing something wrong Similarly, use the Restore Wizard to restore your partition/drive.
HDMS 2011- back up a dual-boot Mac to an external USB drive, do:
1) Boot from the Recovery Disk (I'm assuming that the backup hard drive is attached before you reboot)
2) Select Paragon Hard Disk Manager
3) Launch the Backup Wizard by selecting Wizards > Backup Wizard
4) Select the Mac hard disk (not the partition) where it asks "what to backup"
5) On the Backup Destination page, select "Save data to any local drive or a network share"
6) Hit the radio button for the "Save to local drive option" (unless you got a boatload of DVD's )
7) Select the external USB drive as the backup destination
8) Look over and correct the name and comments
9) Hit Next to start the backup
When it's done, you have an entire copy of your Mac's HD saved to external media.
If you need to recover your HD, just run the Recovery Wizard and reverse the process.

How to fix Boot Camp partition that won't boot

Similar Messages

Maybe you are looking for