How to fix corrupt dll files

Hi,
Happy New Year!
May it bring all of us, Good Health, Happiness, Harmony & Prosperity!
I will like to let you know that a few month back, I bought this S10-2 directly from Leveno, USA, but regrettably with in a a few days, I realized that this machine has the following problems:
1) The "dll files" are corrupt, details are as follows:
advpack.dll
dnsapi.dll
gdi32.dll
msv1_0.dll
2) Power Options: Control Panel / Power Options / Advance (Power buttons) has 3 options (default)
a) When I close the lid of my portable computer : Stand by
Kindly note that when I do this my system enters the stand by mode but after an hour or two even when the lid is close position, it wakes up again which I feel is a mall function and need a fix.
I will also like you to know that as of date I have repeatedly restored the machine to Factory Settings with a hope to fix the above problems but in vain as such I thought of approaching this august forum not only to educate myself as to how the files got corrupt but also to find a permanent fix, if possible?
Since I am out of USA where warranty facility can't be availed, hence I do look forward to hearing from a guru, who can bail me out!
Thanking you in anticipation and may God bless you!
Warm regards,
Anwar

Hi and welcome to lenovo forum...
wish you a happy new year ...
That could help BIOS 22 for S10-2 why ?
1ACN22WW 1.Fixed abnormal resume from standby mode issue.
Installing the package in Windows.
======================
1. Locate the file 1ACN22WW.exe that has been downloaded.
2. Double click the 1ACN22WW.exe icon.
3. Click install
4. Click flash bios
5. Press Enter to start flashing. During the process, you are advised not to turn off the computer.
6. When the update finishes, the computer will automatically reboot for the changes to take effect.
prefer to update BIOS ...after that procedure ...recover to factory again...that should fix that prob...
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Similar Messages

How to create a .DLL file from a .C file ?

Hi everybody
I'm looking for a method how to create a .DLL file from a .C file .That Dll file will be used to perform a board to measure voice quality accoding to the international standard named PESQ (perceptual evaluation of speech qualty) P.862.
Can anyone help to start dealing with Dlls and give some advices to avoid errors ?
thx
Attachments:
source.zip ‏37 KB

Hi sinaps,
You mention that you want to create a DLL from a .C file. Just to clarify, are you using C (.c file) or C++ (.cpp) to write your code?
Also, if you are using C++, are you using Visual Studio? (The reason I ask is because this forum is geared towards Measurement Studio, which is an add on to Microsoft Visual Studio).
That being said,
If you are using C: National Instruments provides an ANSI C Application Development Environment called LabWindows/CVI which makes building dlls a snap. It has templates for DLLs and you can build them either as stdcall or cdecl dlls.
Developer Zone Tutorial: Building a DLL with LabWindows/CVI 8.5 for use with LabVIEW 8.5
If you are using Visual C++: Look at the link that Al provided earlier.
MSDN: Walkthrough: Creating and Using a Dynamic Link Library
If you aren't using CVI or Visual Studio, then really the best bet is to do a google search for "Create C DLL" or post or a forum for the appropriate environment that you are using.
Thanks!
Message Edited by Jervin_J on 03-14-2009 02:02 PM
Jervin Justin
NI TestStand Product Manager

How to fix the .pdf file with error "invalid annotation object"

how to fix the .pdf file with error "invalid annotation object"

As long as the PDF opens, then just try saving it to a new file name. There may be a preflight script that would help troubleshoot the issue.

How to view corrupted word files, please help?

Can't view doc corrupted file .How to recover unsaved documents WORD? how to view corrupted word files, please help

It could be Word or even Windows that is having the problem. Before you start trying to restore a backup or repair a file, try opening other documents.
Try opening your "corrupt" document from another computer. Also you can try to make a copy of corrupted files. (It could work) : http://www.filerepairforum.com/forum/microsoft/microsoft-aa/word/968-i-would-be-grateful-for-any-help-to-repair-or-the-procedures-word-files
But if nothing helps, you can try to recover it by using DOCX Viewer Tool Download free demo versions of this software from website: http://www.docx.viewertool.com/ It’s
gonna help.

Fixing corrupt JPG files

Is there any good software out there for fixing corrupt JPG files?

Corruption damage in a .JPG entails data loss and the JPEG format does not contain redundancy, so there's no way to recover what's lost. Usually if the damage is found towards the end of the file, you can "recover" the good part by truncating it. If you want to do it interactively, you can try using software such as [The Gimp|http://www.gimp.org>, or its (very) expensive brother, Photoshop.
To do it automatically (batch mode) you can investigate if any of the tools in the [Image Magick package|http://www.imagemagick.org/script/index.php] helps. Note that these are command-line Unix tools.

How to repair corrupted xp files with the Toshiba recovery dvd pkg

Hello all, my Satellite a105-s4054 has some corrupted xp os files. Please advise on how to repair only these files using the recovery dvd pks included with my sytem. I would rather not have to do a complete format and install. And it is now obvious which of the individual files listed should be replaced to repair the corrupted files.
Is there way to just replace the corrupted files?
Thank you

Satellite A105-S4054
..replace the corrupted files?
If they are system files, this will fix them.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
-Jerry

How to repair corrupted PDF-File ?

Hi there !
I am having problems with a couple of PDF-files which got damaged due to a hard drive break down / file recovery action.
Neither can i open them ("...not supported") nor have several attempts in repairing them (by using Pdf-repair software) been successful.
Interesting point about it is, that in terms of file characteristics everything seems to be OK (file size, file type etc. are recognized by the computer).
Does anyone have an idea what could be done to get my PDF's back to a readable status ?
Thanks     timrelo
Ps: In case you got an idea about how to fix a corrupted pdf-file, i am willing to send you one of my files.
      To do so, please send an email to    [email protected]    and i will email you a file.

Hi Bernd,
unfortunately i don't have the root-file (indesign etc.) to re-create/export a new pdf.
all i got is a couple of restored (from the crashed hard drive) pdf files which are indicated as being "corrupt/damaged".
greets   tim

How to fix corrupt keychain permissions?

My keychain permissions have been corrupted. Anyone know how to fix this? Keychain First Aid as well as repairing disk permissions didn't help. What I have also tried, though without success, is starting up from the recovery partition and repair both, home folder & ACL permissions from there. Nothing worked. Any help welcome as I am getting more & more worried.

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.

Fixing corrupted video files

Hello,
So an unusual thing has happened to a project I have been working on in iMovie'11. I hope I can explain it properly, since the circumstances seems quite complex (to this layman at least).
It began when I tried speeding up one of the clips I was using. When I applied this function, it corrupted the project: when spooling through the clips in the project editor, the corresponding video didn't appear in the screen to the right, so I couldn't edit it any more. So I undid the Change Speed edit, shut down iMovie and restarted it, hoping that I could pick up again from where I left off, without the final speed change edit. I have done this a number of times when this problem occurs, and it usually works.
Unfortunately, this time, the project was still corrupted. In fact, all the projects I was working on, bar one, were corrupted, and I could no longer edit them. I couldn't even go into any of the projects, since the text in the button at the top left saying "Edit Project" was grey and didn't respond to clicks.
Trying to salvage the project, I removed the New Event folder from the iMovie Event folder in Finder, and restarted iMovie. When it started, I was now able to enter my projects although of course, without any clips in the iMovie Event folder, I could only look at the individual thumbnail clips, and couldn't spool through them.
I copied the clips from the project I was working on, created a new project and pasted them into that. Then I put the New Event folder back into the iMovie Event folder, and imported another clip. After I did this, I was actually able to work on the clips from my original project in the new project again. It seemed that the clips from my project were linking to the files in the iMovie Event folder, and the thumbnail files too. I thought I'd managed to save the project, but when I restarted iMovie the next day, the formerly working project was corrupted again.
I know that the clips are there, organised and edited in the way I want them, but I think they are having trouble linking to their corresponding clips in the iMovie Event folder. In the event library in the bottom half, the bits of the clips I am using for this project are marked out in orange lines at the bottom of the thumbnails, as it would with a properly functioning project. So in a sense, the programme "knows" what clips I am using and where, but unless I can edit them properly in the project editor, I can't do anything with it, and certainly can't export it.
I hope I've managed to explain this problem in a way that makes sense, and will be very grateful for your help.
Thank you very much.

I'm having the same problem!
Help! I don't know how to fix it & have spent so much time on this. I just don't know
what's wrong! It have many video clips in my project & had noticed that the viewer
window wasn't playing the events but didn't worry about it. Added more clips to
my project, photos, music & then POOF! One by one the videos in the project are
corrupted! Tried re-importing directly into iMovie then reinserting into the project.
That works but another video will corrupt. Also tried copying project & erasing the
original. That didn't work!
To try to fix this I tried erasing the plist file thing that some threads mention. It
didn't work. All the events are iPhoto videos - does this have something to do with
it?!
I don't know what to do & have many, many videos to process. I went out & bought
FCE (Final Cut Express) to try to continue w/o iMovie but even when I've learned FCE
iMovie will still have things I want to use!
Anyone out here have the solution?? Maybe I should re-install iMovie...

How to recover corrupt passwd file for c6000+x6270?

i met a problem.
passwd file corrupts and nobody can login.
hardware platform is c6000+x6270 blade, os disks have mirrorred.
in this environment, how to recover the passwd file(we have one copy)?
Thanks

The procedure can differ depending which volume manager software you use, it this is the case. But basically, you should boot with an external media, like DVD or jumpstart server, mount the root partition and fix the /etc/passwd file, umount the partition and finally reboot.

How to fix corrupted backup then proceed with restore? Or extract app databases from corrupted backup?

Deeply let down by Backup restore :-(
iPhone 3GS with iOS5.1 (the latest) started to behave abnormally. Made a full restore of iOS then tried to restore from backup only to discover message that my backup is corrupt or not compatible. Contacts were restored more or less OK but all applications data including personal financials (PocketMoney records) were lost.
Tried 2 times to run restore from backup but without success :-( Is there any chance to fix so-called corrupted backup file or at least to retrieve my app databases out of there?
Any help will be greatly appreciated. Thanks.

Not that I've heard of. You can extract some of your data from a backup using iPhone Backup Extractor, but I'm not sure that includes app data (you could try contacting them to find out). And even if you could, I don't know how you would sync it back to your phone.

How to fix applepushservice.dll issues for downloading iTunes on Windows 7 64 bit

I recently had iTunes crash on my home PC, Windows 7 64-bit. I have tried several attempts to uninstall and reinstall the program and it still does not work and I receive error messages. The latest: The program can't start because ApplePushService.dll is missing from your computer. Try reinstalling the program to fix the problem. Problem is, the articles that I have seen state this is an Unknown source and my firewall will not allow it to be installed. The original error was a Windows Error 7 (registry & .dll issues). Any suggestions on how to fix this problem?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

How to run windows dll files and driver loaded in remote system?

Dear Friends,
I need some valuable info regd how to run a remote windows dll files and the drivers of the system using java
reply regd thanking you

Please don't make duplicate posts like this.

TrueTime Card and how to interface with dll file!?

I am trying to interface with a PCI-SG 2U (IRIG) timing card (Used to made by TrueTime, now Symmetricom). Does anyone have a solution for this card in LV 2009?
If not, can anyone give advice on writing code to interface with .dll file? I am not sure how to pass through the "GENERIC_READ | GENERIC_WRITE" into the function to open the device. The function says to open it is:
TT_OpenDevice(boardID, GENERIC_READ | GENERIC_WRITE, &hDevice)
No clue on how to pass this in. Can anyone help?
Thanks -
Tom

Thanks Mike. I do have the .h file and the sdk information. I went through and used the Import>Shared Library Tool and was able to find all the header information that way. I guess that my problem/question is, the documentation says that it is a DWORD to pass as an input, but LabVIEW says it is a uint32. I guess the real question is, what the heck do I pass in to the dll function? Should it be the string "GENERIC_READ | GENERIC_WRITE" or something else?
Thanks -
Tom

"zip" Terminal command no help fixing corrupt zip file; any other workarounds?

I downloaded a ".zip" file containing some files that I need to access.
When I double-click on it, I get the "Unable to unarchive 'xyz.zip' into '[foldername].' ( Error 1 - Operation not permitted )" message, which many people report when they try to open a corrupt zip file.
I also tried opening the file with "StuffIt Expander," "Archive Utility," and "The Unarchiver," as well as some specialty zip-compression programs, but none were successful.
I then installed the very useful "Archive.qlgenerator" plugin (http://homepage.mac.com/xdd/software/archive/) which allowed me to at least see inside the zip file using OSX's "QuickLook" feature. Lo and behold, all the files that were supposed to be in the zip file are indeed in there, as they should be. The problem is not that the zip file is empty, the problem is that it has become corrupted somehow.
So, what I need to do is either "fix" the corrupted zip file, or alternately find some way to extract the needed files using brute force.
Following tips given on various forums, I tried using OSX's "zip" command in terminal (http://homepage.mac.com/kelleherk/iblog/C1901548470/E731143104/index.html and http://hintsforums.macworld.com/showthread.php?t=132146). I was able to use it properly, but unfortunately neither the "-F" nor the "-FF" commands were of any helping in "fixing" the zip file. The "-F" command incorrectly said that the zip file was empty and that there was nothing to fix; the stronger "-FF" command came back with
Could not find:
xzy.z01
Hit c      (change path to where this split file is)
    s      (skip this split)
    q      (abort archive - quit)
    e      (end this archive - no more splits)
    z      (look for .zip split - the last split)
or ENTER (try reading this split again):
...but none of the options produced any result. Pressing "z" gave me
Could not find or open
xyz.zip
...which means that even "-FF" could not get past whatever problem had corrupted the file.
So: is there any built-in way for Mac OSX to fix or extract the contents of a zip file corrupted like this?
Alternately, is there any third-party shareware or freeware that will do the trick?
(I don't want to have to spend big $$$ on a commercial program since all I need to do is open a single zip file. And there is no way to contact the zip file's original creator, so I can't download an uncorrupted version.)
Any help would be greatly appreciated.

Mark:
When I try your first suggestion in Terminal ("unzip -t /path/to/file"), I get this message:
Archive: /xyz.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of /xyz.zip or
        /xyz.zip.zip, and cannot find /xyz.zip.ZIP, period.
When I try your second suggestion ("unzip -l /path/to/file"), I get the exact same error message. (And yes, I am fixing "/path/to/file" to be the correct path to the actual file).
And no, it is not really part of a multi-part archive. (Or at least it wasn't supposed to be; only one zip file is available, and there was only supposed to one.) Perhaps the zip was mis-encoded in the first place, so that the person who created it accidentally did something wrong which the unzip applications are interpreting as this file being part of a multi-part archive; but even so, all I have is this one file, so I need to fix it as is, or extract its contents as is, since I have no way to contact the original creator to do it right this time.

How to fix corrupt dll files

Similar Messages

Maybe you are looking for