How to fix crackling and poping on hd movies

i recently downloaded a tv series in HD and i hear crackle and poping noises sometimes the movies are still watchable tho but its anoying any idea how to fix it
btw im on a windows machine

OK. FIRST GO TO FACTORY RESET FROM SETTINGS MENU. THEN TRY IT AGAIN WITH SOFT RESET AN HARD RESET IF NOT SOLVED. IT WORKED FOR ME AFTER DOING A FACTORY RESET FROM THE MENU ( BT AND FM RADIO WORKED IMMEDIATELY).
hOPE i HELPED!

Similar Messages

After installing "OS X Mountain Lion" it saypowerpc applications are no longer supported" how to fix this, and why they dont say before you install that this might happen!

after installing "OS X Mountain Lion" it saypowerpc applications are no longer supported" how to fix this, and why they dont say before you install that this might happen!

Office 2004 Applications Won't Work in Lion
You must have Office 2004 which is a PPC-only suite and will not work in Lion. You need to upgrade to Office 2011 - Mactopia - or you can try the freeware suite, Libre Office, that is functionally similar to Office 2007 for Windows except it works on Lion.
You may want to consider as well:
These two suites are similar to Libre Office but not as current or as well-supported:
NeoOffice
Open Office
And, then there is Apple's iWork suite:
Pages - word processing and layout
Keynote - presentation
Numbers - spreadsheet
Each can open and save Office compatible files. They may be purchased separately via the Mac App Store for $19.99 each.
(Access to the Mac App Store requires Snow Leopard 10.6.6 or higher and an Apple ID.)

I downloaded something called MPlayerX and it is ruining my computer (a macbook pro) and now on safari theres pop up adds that shouldn't be there and on the google homepage theres adds. I want to know how to fix this and get rid of MPlayerX :( PLEASE

I downloaded something called MPlayerX and it is ruining my computer (a macbook pro) and now on safari theres pop up adds that shouldn't be there and on the google homepage theres adds. I want to know how to fix this and get rid of MPlayerX PLEASE HELP ME!!!!

MPlayerX isn't itself the problem; it was downloaded from a source that packaged adware with it. Click here and follow the instructions, or if desired, run Adware Medic.
(114466)

I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

I can't sync my iPad to the iTunes it's give me an unknown error message 0xe8000012 I don't know how to fix it and where is the problem could be need format or the problem is in the charging port please can any one help me

Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
From Here > http://support.apple.com/kb/TS3694

I had greyed out wifi, looked on the net how to fix it and it said to use a hairdryer which worked it greyed out again 5 mins after, so i did it again this happened 3 times then the 4th time the screen went white any ideas whats happned an how to fix it?

i had greyed out wifi on my iphone 4s, looked on the net how to fix it and it said to use a hairdryer which worked it greyed out again 5 mins after, so i did it again this happened 3 times then the 4th time the screen went white any ideas whats happned an how to fix it?

No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

How to fix "offline" and other errors on Photosmart B210a from OSX 10.7?

I have a Photosmart Plus B201a printer connected to my network wirelessly. I am able to print to it and scan from it via the OS using three different Windows 7 machines, but I am unable to print to it or scan from it via the OS on my MacBookPro (running Snowleopard - 10.6). I can see it on Bonjour when I add it as a printer, but when I try to print I either get a miscellaneouse printer error, or the Mac thinks that it is offline. I am able to access it via its webserver and can even scan there. I am also able to print to it via the eprintcenter ... just not via the OS. I have called Apple and they say it is a printer problem. HP says it is an OS issue. Anyone have any ideas?

Dean,
I checked the F/W
Current Firmware Version : 1.35NA
Current Firmware Date : 2010/11/12
Check Online Now for Latest Firmware Version :Check Now
This firmware is the latest version.
I changed my wireless to "2.462 GHz - CH 11"
I did a "Reset Printing System" and then tried to readd my printer. In order to get this to work, I had to go to use the printers webserver and disable Bonjour, apply, and then enable Bonjour, apply. After this I was a ble to readd the printer and print a document. I then tried to print a second document, and I got "printer ofline". So I tried the disable/enable Bonjour trick and then paused and then restarted the printer and my second document printed.
I do not want to have to go through all of those steps to get each document to print so I hope that with this information you might have an idea of how to fix this.
BTW, thanks for the help and attention so far ... I do appreciate it.
- Lowell

Ipod touch 4 freezes in middle of video and turns it black but audio still continues to play, how to fix this and what possibly caused it?

Help out? i was watching a 43 min episode and it works fine in the first like 20 minutes but later on in freezes, it turns the screen completely black afterwards, there's still sound, but theres no video, the screen is completely black while audio continues to play. How to fix this? and what were the possible causes for this?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Delete/unsunc he video and then resync/redownload
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

How to fix privacy and extensions tab that are blank (using Safari 5.1.7)

I have looked at the help provided in this forum for fixing the privacy and extension tabs that happen to now be blank. However, being new to a mac, I was not able to follow those instructions. If anyone can give me some help/guidance, I would really appreciate it. Also, what exactly does the privacy tab do? If it has been blank for a while and I have been to websites and used my credit card information was it secure? Thanks so much in advance for any/all help. TAD

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

How to fix DT_Text and DT_NText Read Only in Script Component

I have a script component that I have written and works as long as the Output columns on the script are string types. When I change the output column type to text (since the size could be essentially unlimited) it gives an error in the script component that the property is read only.
Here is the code line that fails with Property Payments is read only.
Output0Buffer.Payments = fieldValues(i)
If I change the column payments to DT_Wstr it works without issue, but I want to use text incase the value is large.
Here is the error if you try to run the actual script even though I know it has an error.
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Script Component [85]]: Error 30526: Property 'Payments' is 'ReadOnly'.
Line 86   Column 13 through 69
Error 30526: Property 'Ops' is 'ReadOnly'.
Line 155   Column 13 through 65
Error at Data Flow Task [Script Component [85]]: Error 30526: Property 'Payments' is 'ReadOnly'.
Line 86   Column 13 through 69
Error 30526: Property 'Ops' is 'ReadOnly'.
Line 155   Column 13 through 65
Error at Data Flow Task [DTS.Pipeline]: "component "Script Component" (85)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
BUTTONS:
OK

Hi Jaegd,
Im stuck at converting ntext datatype source column to varchar(max) target using C# in SSIS ScriptComponent . Im new to C# and trying different processes but no luck . Can you give me some direction ?
using System;
using System.Text;
using System.Data;
using Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using Microsoft.SqlServer.Dts.Runtime.Wrapper;
public override void Input0_ProcessInputRow(Input0Buffer Row)
System.Text.UnicodeEncoding encoding = new System.Text.UnicodeEncoding();
Row.Body.AddBlobData(encoding.GetBytes("MyString"));
byte[] bytes = Row.Body.GetBlobData(0, (int)Row.Body.Length);
string myString = encoding.GetString(bytes);
Im not sure if this even works as the output datatype is still ntext and how can i add your suggestion   Output0Buffer.Payments.AddBlobData(Encoding.Unicode.GetBytes(SomeStringHere))
. Im not sure what im missing .

Privilege settings how to fix them and what are they

trying to download itunes gives me a privilege error message

Hi mariacrowe,
Welcome to the Support Communities!
The article below will help you with issues installing the latest version of iTunes for Windows:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
What version of Windows are you using? This article explains what file permissions are and gives instructions from Microsoft for changing permissions:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
Resolution
These messages occur if permissions are incorrect on your designated music folder or on a folder inside your designated music folder. Permissions are settings that determine who can read, write to, or execute a file or folder on your computer. Every file and folder on your hard disk has an associated set of permissions.
Example: If permissions are correct on your Music folder, but incorrect on the U2 folder inside your Music folder, you would be able to add other music to your iTunes library, but not that new U2 album.
Look here for help in correcting the permissions on folders:
Windows XP:
How to set, view, change, or remove file and folder permissions in Windows XP
Note: Permissions and privileges for files are different from authorization to play a song purchased from the iTunes Store. Click here for information on authorizing a purchased song to play.
Additional Information
To be able to add new music to iTunes, permissions must be correct on your Music folder and the folders in it.
Cheers,
- Judy

How to fix font and app color

My iPod touch changed the color of wallpaper and the color behind some of the apps. How do I get it back to normal?

Try either Triple-clicking the Home button, or going into Settings > General > Accessibility > Turn "White on Black" OFF.

Firefox crashed and will not open again, I did not upgrade to 5.0 - is a mac 10.7 Please tell me how to fix this and I don't want complicted.

my computer upgraded from 3.6 to 5 and crashed and will not now open any pages with firefox. I have tried to reinstall many times with same result. What is the problem? I do not beleive I am alone in this. I had not idea that the upgrade occured on the 15th of June but it opened on the a.m of the 28th and then shut down immediately and will not access my home page or any other page again.

Try going to the Tools menu item, and choose Options.
In the popup, select the Advanced screen (cog icon) and under that, the Update sub-tab. On that tab, uncheck the various boxes for checking for updates, and see if that helps?

How I fixed Imessage and Factime

As I'm sure all of you know, Imessage and Facetime seem not to work with new IOS 5 updates. I can't seem to understand why, but it seems as if pre-paid users of the Iphone are the people whom are suffering the most. If your anything like me, your able to send imessages and use facetime via e-mail, but that kind of defeats the purpose of having an IPHONE...... After countless hours of research and trying little stupid things in settings, I have found my solution. Sadly, this does require a credit card, as well as a purchase of an application (any 99 cent app you want). I personally hate this fact, however it did work for me. The steps I took are simple and are as follows.
1. Go to settings, and select your store tab
2. Tap your apple id and select "view appleid"
3. Edit your payment info by adding a credit card (if you already have one simply add a new one and delete that one)
4. Go to the app store and select ANY 99 cent purchase.
5. voi la, my imessage and facetime activated within a matter of seconds after purchasing asphault 6- adrenaline rush (or something like that)
I am using Rogers pre-paid canada and this method worked for me even using a United States apple id. Another FYI is that it never hurts to have about $5 in your pre-paid account at all times.
Hopefully this worked for some people, and I'm sorry if your still struggling to get your phone # to work.

AppleFinatick wrote:
As I'm sure all of you know, Imessage and Facetime seem not to work with new IOS 5 updates.
Uh, I don't know that at all. They both work fine for me with iOS 5.1.1. Based on what I've seen (or rather, not seen) on the forums, they work fine for most people.

How to fix Import and folder-synchronize?

Installed Lightroom 4.2 RC. Now Import and folder synchronize hang up. Uninstalled 42. RC with same result. Removed and then reinstalled 4.1 with same problem.
Please advise.
[email protected]
Message was edited by: SD Rowdies

They might not be compatible with the iPad's video capability. Are they Flash videos?

I just bought my IPAD 3 will not activate says activation server cannot be reach. How to fix this and should I take it back and get a different one.

I have never had anything apple before and I just bought this IPAD 3rd gen. I begin doing the process of starting it up. I get to activation and it wont go any further. I have tried numerous times. Says "Your IPad cannot be activated because the activation server cannot be reachrf. Try connecting you iPad to iTunes to activate it, or try again in a couple of minutes." I am lost. Not a tech guru... Any help is wonderful. And is this a good model?
Thanks. Crystal

Nevermind. All i had to do was close out of itunes and reopen it and then it activated it. If anyone else is having this problem, try that trick and i hope it helps

How to fix crackling and poping on hd movies

Similar Messages

Maybe you are looking for