How to Fix Disappeari​ng HP Printer Drivers -- Disable HP CUE Device Discovery Service

I have a new HP G60-530US laptop with Windows 7 installed (less than 2 months old). It is connected to an HP 7410 All-in-One Printer and a Brother laser printer.
Three times now, the HP 7410 printer has mysteriously disappeared from the installed printers. The Brother printer does not disappear.
To re-install the HP 7410 printer requires disabling the AVS using the Services,msc utility (not just shutting down the AVS (Panda in my case)).  It takes 20 minutes or so to re-install the HP printer driver software.
HP tech support is clueless about the cause or cure for this.
The laptop people referred me to the printer support people and the printer support people referred me to the laptop support people. The last tech support guy suggested that I restore the system on the theory that if the problem persisted it would be a hardware problem and not a software problem. He seemed to miss the fact that the disappearing printer driver software only occured with HP printers.
HP technical support was worthless.
Some internet forums suggest that this occurs when HP machines are connected to different networks. I noticed my problem occur after I took the laptop on a business trip and connected to a different wireless network.
On Vista forums, I've discovered that the disappearing HP printer drivers has been a problem for some time over a wide range of HP printers. 
The solution identified on those forums is to stop and disable the HP CUE Device Discovery Service. Apparently, this service is used to detect HP printers and add them to the HP Solutions Center software.
In my experience, the HP printer drivers disappeared when my laptop comes into range of a "foreign" HP printer with wireless capabilities. For example, my laptop dropped my configured HP wireless printer when I went to an office that had a different wireless HP printer installed. The HP CUE service trashes the existing printer driver even though you do not intend to install and use the "foreign" printer. That would also explain why the printer drivers disappear when visiting a hotel or other location where any HP wireless devices exist. It would also explain why non-HP drivers do not disappear.
I've disabled the CUE Device Detection Service (using the Services utility). I'll see if that works.  From what I've read, the CUE Device Detection Service is not needed after you have installed your printer, but it remains in your computer's active memory just "in case" you want to connect to a new HP printer and install software for that printer.  Said differently, after your printer is installed, it remains as useless HP software that clogs your machine's resources.
A patch from Microsoft or HP (e.g., a patch that disables the CUE service) would be a big help to users if the number of posts on this issue are any indication of how pervasive this problem is.

This seems to be a common problem that exists for many HP devices, varying computer moakes and models and different operating systems. So, the conclusion must be that it is a HP issue. WHY ARE THEY NOT FIXING IT?
Based on this I am quite happy to buy a different make of printer so how does HP justify the continuing lack of support?
I posted a message about my C7180 All-in-one which had been causing problems but I put it down to me making (unrelated) changes to my system then noticed it got worse when I connected a new Trust digital pad. However, even when the pad is not connected I get the problem of disappearing drivers with the printer still visible.
What seems to happen to my set-up is it works when it is first reloaded and used, but the next time I open the HP software it fails and no other software is able to print/scan on the device.
Can somebody explain what the CUE is? I'll give it a try but I don't know what it refers to.
Who'd have thought that in the 21st century, software/hardware engineeers still can't make a simpy process for a computer. Whatever happened to the promise of plug'n'play?
P.

Similar Messages

  • I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It quits when the Twain portion of the program starts loading. Does anyone know how to fix this so my printer will work with Photoshop??

    I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!

    You're welcome. 
    But, no, don't look to  Epson for fixes to their  driver in newer versions, and Adobe has deprecated the TWAIN plug-in.  Hoping for a solution there is futile.  That has not happened and it's never going to happen.  The consensus is that it's pretty foolish to tie up Photoshop to scan.  Honestly.
    Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
    You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever.  When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software.  If you think about it, its most inefficient.
    VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist.  VueScan is not free, but it's a pretty good value, IMO.
    As for the Epson CD printing software, I have no clue.  Sorry. 

  • How do I install dell v305 print drivers on my new macbook pro?

    how do I install dell v305 print drivers on my new macbook pro?

    Dell's drivers are only for Windows. If you can find out who makes the printer and what model it is, then you may be able to find OS X drivers for it. Or you can see how well it works using the Generic driver.

  • How to fix your iPod after it got disabled to how it says connect to iTunes

    How to fix your iPod after it got disabled to how it says connect to iTunes

    i can probably help but i need more information

  • How to fix OXC19A0020 error in printer HP6500A plus, just as faxing and copying machine.

    I have just bought a printer HP6500A plus, which I use it as faxing and copying machine only. Therefore, I never connect it to a computer. After I installed the machine, it worked for the very first time. Then, I changed the new carbridge. It did not work anymore indicating error code OXC19A0020. I shut off the power and examined all the carbridge insertions. Everything seems OK, but the code still appear and not working. Pls advise how to fix this new machine. Tks

    Hi Rayraylam03,
    If your problem is still unsolved, you can try these solutions:
    http://fix-your-printer.blogspot.com/2011/01/solving-error-code-oxc19a0036-on-hp.html
    Good luck !

  • HT5628 How to fix track pad and audio drivers if we install windows 8 on macbook pro??

    Can anyone help me how to install track pad and audio drivers for my MBP if i install windows 8 on it?

    Run Boot Camp Assistant and select the menu option to download the Windows Support software, Then start Windows and install the Windows Support software. Follow the Boot Camp instructions which detail how to download and install the drivers (Windows Support software).

  • How can I uninstall / remove HP printer drivers and software?

    Hi,
    I tried using the HP uninstall program to remove the HP printer drivers and related software, but I still see them in my hard drive. I see HP files in my Library/Preferences and Library/Printers folder. I will remove them by hand. Are there other HP files I should remove?
    Thanks,
    Ken

    Hi Ken!
    I have a HP printer as well, and these are the items that are on my HD.
    HD > Applications: Hewlett-Packard Folder
    HD > Users > Your Account > Library > Preferences:
    com.apple.print.PrinterProxy.Your HP Printer.plist File
    com.apple.print.PrintCenter.plist File
    com.hp.printerutility.plist File
    hp inkjet utility prefs File
    com.hp.Device.Manager.plist File
    com.hp.Photosmart.Studio.plist File
    com.hp.scanpro.prefs File
    com.hp.scanpro.plist File
    com.hp.photosmart.scandestinations.plist File
    Hewlett-Packard Preferences Folder
    com.hp.printerselector.plist File
    com.apple.print.custompresets.plist File
    In the above Preferences folder, look for any other files or folders related to your printer as well.
    HD > Library > Printers: hp Folder
    But I also have HP camera software installed, so you may not have all of these.
    ali b

  • How to fix a ipod touch that is disabled

    My Ipod touch says that its disabled and I don't know how to fix it.  Does anyone know how to fix it?

    If you have a passcode to the screen lock that you've forgotten, restore the iPod from the computer to which the iPod is synced. For information and instructions, see:
    http://support.apple.com/kb/ht1212
    If that will not work, you'll need to put the iPod into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • How Do Fix Your Ipod If It Says Disabled

    What Do You Do To Fix Your Ipod When It Says Disabled?

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...

  • How setup browser laces import Bookmarks HTML security disable button open Device Manager security warni vewing mixed

    how to alter these settings?
    1.browser laces import Bookmarks HTML?
    2.security disable button open Device Manager?
    3.security warni vewing mixed?

    We didn't get a reply from you.  I just wanted to try and follow up before I close this out. 
    I'd like to know if the issue went away, and/or if you could confirm whether it's Firefox specific or happening in all browsers.

  • HOW TO FIX CTRL P FOR PRINTING MINE STOPPED WORKING

    EVER SINCE I UPGRADED TO FIREFOX 6 MY CTRL P SHORTCUT STOPPED WORKING FOR PRINTING I SAVE A LOT OF WEB PAGES TO PDF NOW I CAN'T ANY HELP

    I use 2 of them IDM which works fine and Fileserve Download Manager isn't compatible yet with 7, but i think i might not need Fileserve much longer though so it might work out we'll see

  • HT1212 HOW TO FIX POD WHEN COMMING UP SAYING DISABLED

    ipod wont reset in ituenes keeps asking for a password that my daughter has forgot

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • How to fix "server problem" error message when trying to use PhoneGap build service.

    I have a site that is now optimized for mobile devices and want to use the PhoneGap Build service in Dreamweaver CS6 to make a native app.  Unfortunately, I keep getting the "We seem to be having server problems." error message when I try to create a new project.  I did notice that the configuration file was created at the site root.  I've seen a few other similar threads on this, but no solution.  I've checked on any firewall issues (none) and know that the PhoneGap server is not down.  The problem is on my end.
    Thanks,
    Loren

    Not an answer to the server problem, but I have posted the PhoneGap Build process here: http://forums.adobe.com/message/4669054#4669054. It might help anyone still having problems.

  • How to fix "Your Apple ID has been disabled

    Cannot download any app due to "Your Apple ID has been disable"

    Apple ID is Disabled - Apple Club
    Apple ID- "This Apple ID has been disabled for security reasons" alert appears

  • I have Acrobat 9 Pro and when I print hard copies of my PDF letters drop off from sentences throughout the document. Any idea why and how to fix this problem?

    I have Acrobat 9 Pro and when I print hard copies of my PDF letters drop off from sentences throughout the document. Any idea why and how to fix this problem?

    Hi,
    We’re using Windows 7 Professional, Service Pack 1 and system type is 32-bit operating system.
    Ange

Maybe you are looking for

  • QSS WONT OPEN IN BROWSER---UPGRADED TO 10.3.9 FROM 10.2 NOW NO WORK

    ERROR MSG:: Safari can't open the page "http://127.0.0.1:1220/" because it could not connect to the server "127.0.0.1". does anyone have any idea bout this???????? using for streaming live audio, and my music qss (darwin streaming server) version dow

  • Changing labels in JFileChooser

    Hello, for a multi-language application I need to change the text dynamically in a JFileChooser. Changing the text of the buttons works well with UIManager.put("FileChooser.cancelButtonText","desired text");. But I don't know how to reach the labels

  • Issue in BADI BBP_CUF_BADI_2

    Hi SRM Gurus, I have requirement to add 3 custom fields(YES/NO Box,PO Number,PO Value) in the Item Detail Basic Screen and i have added the 3 fields in the structure  BBP_PDS_ITEM_SC_CI and so the fields are displayed in the Item detail Basic data sc

  • Computer won't go to sleep

    I have a Power Mac G4 running 10.4.11. All of a sudden, the system stopped going to sleep when set to do so in Energy Saver. The Screen Saver comes on according to its setting, and the display goes to sleep according to its setting in Energy Saver, b

  • Load Program to Assign Class to Routing Operation

    Hello Experts,    I used the standard batch direct input program to load Routings/operations/bom component allocation etc. We also have a requirement to assign Class(for class type 018) to each of these operations. Please suggest a standard load prog