How to fix Entry Point dll error?

Premiere Elements has been running OK for a couple of years, had to replace C drive. After reloading Premiere Elements 4 I get the following error (Vista).
?resolveEntity@DefaultHandler@xercesc_2_2@@UAEPAVInputSource@2QBG0@Z could not be loaced in the dynamic link library xerces-c_2_7.dll
Thanks

BTW, when you replaced your C drive, you didn't just make a copy of the disc's files and copy them to the new drive, did you?
This often doesn't work. It's a much better idea to re-install your software after you've installed the operating system. Otherwise, problems like you're describing are pretty common.

Similar Messages

How do you fix a msvcr80.dll error when trying to install itunes 11.1.4

How do you fix a msvcr80.dll error when trying to install itunes 11.1.4?

This also work100%
Removing and reinstalling iTunes and other software components
If applicable, disconnect any iPod or iOS device and close Microsoft Outlook.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later).
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (see note 1 below)
iCloud (if present)
MobileMe (if present) (see note 2 below)
Bonjour
Apple Application Support
Reboot your computer. Delete any of the following folders where they can be found: (see note 3 below)
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple
C:\Program Files\iPod
C:\Program Files\iTunes
also on 64-bit systems:
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple
C:\Program Files (x86)\iPod
C:\Program Files (x86)\iTunes
Download the iTunes setup file and run it to install. Use an account with administrative rights. This can usually be achieved by right-clicking on the downloaded file and selecting Run as... or Run as Administrator. In some cases a combination of Shift or Ctrl keys may be required for the option to show, or it may not be necessary.
If you deleted iCloud and reinstalling iTunes doesn't automatically reinstall it visit iCloud Control Panel.

How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 app

How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 Creative Suite Cloud App. Many attempts were made to install Photoshop CS6 with Adobe Application Manager without success. Every other Creative Suite Application was successfully downloaded. I keep getting Installation Failed when attempting the Photoshop install. How does one correct this?

Thanks Jeff! So, it totally appears as if it was a network issue. The corporate network where I work is quite likely the culprit. Where I was thrown off is that since I have admin rights on my computer, I can install software. But using Adobe Application Manager to install Adobe software wasn't working. And to make matters worse, there didn't appear to be any way to install Acrobat Pro for Mac without using AAM. The workaround that I used previously was to install the trial versions of Adobe software, and then just register them using my username and password. But the workaround for being able to install everything using AAM was to bring my computer home and download from my home network.

Help! How to fix "Acrobat quit unexpectedly (error code: 0x00000004)"?

Help! How to fix "Acrobat quit unexpectedly (error code: 0x00000004)"?
Customer service ask me uninstall - restart PC - CC cleaner tool - restart PC again - reinstall, but still useless.
Who also facing this problem?

I already check the permission, but still can't run.

How to fix "1801-Microcode Update Error" in HP Compaq dc7700p Convertible Minitower

Hello,
i've been reading and reading this post for a several times and i'm not sure will this work on my PC so i must ask, how to fix "1801-Microcode Update Error" in HP Compaq dc7700p Convertible Minitower i've upgraded it with E7200 instead of the original E6300
here's Product Number: p/n RN120ET#UUZ
I'm able to boot up and start windows i don't know is it working normaly or not, i'm just annoyed with the boot message:
Please HELP and Thank You in advance !!!
This question was solved.
View Solution.

Hi:
You will need to update the BIOS to its latest version to get rid of the microcode error, and the processor will only run at half the FSB speed because the BIOS update was not written to make the E7xxx processors work correctly.
You will need to run this software each time you get into windows and change the multiplier to the max.
Or you can run that batch file listed on the below webpage for it to run automatically.
http://crystalmark.info/software/CrystalCPUID/index-e.html
If I were you, I would just install a Conroe E6700 and have a problem-free upgrade.
You will need to use the DOS based flash because I don't think there is a BIOS update written for W7.

How do you fix entry point error sqlite3_wal_checkpoint

HI All,
I just downloaded the "lastest" PUSH (iOS (iPAD/iPhone), Quicktime, iTunes upgrades for Windows 7 (x64) from Apple, and upon reboot (required) I was greeted with the following error msg.:
"The procedure entry point SQLite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll."
How do you FIX this????
Thanks in advance for your help in resolving this matter.
Regards   Jeff

HI B Noir,
No that did not help.   I did copy the SQLite3.dll to the: Program Files(x86)/common files/Apple/Mobile Device Support folder and that got rid of that error.   It appears that this is an ongoing issue with iTunes on Windows machines. I'm starting to remember that I had to do this for the last update, fouond the fix in another forum dated in 2010.
2 other issues also occur:
1. Can't backup to the computer, only to the icloud. When I change it in itunes it reverts back to the icloud, and will not backup to the computer.
2. The "category list" in the radio on itunes refreshes forever, and no station appear under any category.
Thanks for trying.
Regards   Jeff

Can't open iTunes after upgrade: Procedure entry point AVCFURLAssetInheritURIQueryComponentFromReferencingURIKey error

Hi,
I am using Windows 7 Professional, and upgraded my iTunes yesterday to 11.3. When I attempt to open iTunes, I am getting two error messages:
iTunes.exe - Entry Point Not Found
The procedure entry point AVCFURLAssetInheritURIQueryComponentFromReferencingURIKey could not be located in the dynamic link library AVFoundationCF.dll.
I clicked OK, and get another error message:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)
I reinstalled iTunes and still get the errors.
Is there a solution to this problem? I would hate to uninstall and start over --- especially if that won't fix the problem.
Thanks.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
Not an error message I recognise but the error has the same pattern as those in the first and third boxes suggesting that you've got an outdated .dll file that needs replacing. You should find the file in the Apple Application Support folder. Delete it and then repair Apple Application Support.
tt2

Solution for Windows Store app "projectname.exe" does not contain a static 'Main' method suitable for an entry point . Error.

Hi,
I'm developed a blog reader for windows 8 store app. It was perfectly worked before. But suddenly it started to miss behave and I got an
error. No other errors were there other than that.
Error
Program c:\Users\.........\Desktop\Blog_Reader\Blog_Reader\obj\Release\intermediatexaml\Blog_Reader.exe' does not contain a static 'Main'
method suitable for an entry point.
C:\Users\..........\Desktop\Blog_Reader\Blog_Reader\CSC Blog_Reader
But I found the solution while I fixing it.
Solution for that is like below.
Go to your App.Xaml and Right-Click thenGo to Properties
Check whether the Build Action is
ApplicationDefinition
If not change it to ApplicationDefinition.
Clean the code (solution) and Deploy
Now the error is fiexed.

Hi Robana,
Good sharing on the Technet.
This will definitely benefit other who may encounter the same issue as yours.
Thanks for your sharing again.
Kate Li
TechNet Community Support

Entry point AVCFPlayer error?

Im using windows XP and getting the following message when trying to open up iTunes:
It says:
The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic link libraryAVFoundationCF.dll.
The next screen identified it as error 7 (Windows error 127).

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

How to Fix Encore "No Disk Error"?

When trying to start Encore CS5.0 I get an "Encore.exe - No Disk" error box. The box says "There is no disk in the drive. Please insert a disk into drive\Device\Harddisk8\DR8". There are 3 buttons: "cancel", "try again", and "continue", none of these get rid of the error box and I can't open Encore.
I've reinstalled Encore, no effect.
I disabled a device in location 8 and the error box message changed to "There is no disk in the drive. Please insert a disk into drive\Device\Harddisk4\DR4." I re-enabled the device and the error box reverted to the original "...\DR8."
Appreciate any help on how to fix this. Thanks.
--Dave

Encore "No Drive" Error http://forums.adobe.com/thread/569230 may help
Also... Things and Software to AVOID when authoring/burning a DVD
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no DVD player is required to read a burned disc, having a "good" one from a high quality blank will help

How to fix the field level Error(Invalid Date)

Hi All,
Error: 1 (Field level error)
  SegmentID: ACK
  Position in TS: 5
  Data Element ID: ACK05
  Position in Segment: 5
  Data Value: 162014
  8: Invalid Date
can anyone help me out, How to fix above error? i searched about this but only information about the error is given and no where it is mentioned how to fix it and how is it generated please help me out.
Thanks,
Nitish

Are you sending or receiving the EDI?
Either way, "162014" is simply not a valid EDI data format. Dates in x12 are expressed as CCYYMMDD so December 30, 2013 would appear as 20131230.
If you are receiving, you need to contact the sender and have them correct the output.
If you are sending, you need to property format that date value. For example:
myDateVar.ToString("yyyyMMdd");

How to create Entry Point to pcd repository?

Hi,
I am unable to see the iviews to drag and drop on the web page in Web page composer.
I tried to create static entry point to PCD repository.
But I can't the PCD folders.
How do I configure this?
Thanks
Thruna Shanmuga

Hi Vishal,
Thanks for your replies.
I am able to see the my folder
in Content Administration -> KM Content ->
pcd>portal content>Test
In the property i set the following value.
displaymode=select,maxproviderprio=30,entriesperrow=5,entrypointsprefix=/entrypoints,
sharedcontent=/wpccontent/Cross-Site Content;/documents/MyFolder;/pcd/Test
When I tried to create entry point in Web Page Composer, I click the browse to find the Test folder.
I can't see the Test folder.
How do I create entry point for the Test folder?
Thanks
Thruna Shanmuga
Thanks
Thruna Shanmuga
Edited by: Thruna Shanmuga on Apr 6, 2009 10:34 PM
Edited by: Thruna Shanmuga on Apr 6, 2009 10:42 PM
Edited by: Thruna Shanmuga on Apr 6, 2009 10:42 PM

HT201210 how to fix restore iphone 5 error (1)

when i restore iphone 5 with ios 7.0.4 error (1) how to fix ???

Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.

How to fix this infopath template error?

Hi all,
While trying to Infopath upgrade template facing this:
"Failed to find the XML file at location '15\Template\Features\FT-01-484dec52-5c4f-8f59-0014-1f4274e530b0\feature.xml'"
How to fix this, thanks in advance!

Hi,
As I understand, you encountered the issue when you upgraded template in InfoPath.
This error can occur when the Central Admin service is on a separate server from the Web Front Ends. You can reinstall the SharePoint solution including feature with PowerShell, then
reset IIS.
The PowerShell script below is to reinstall SharePoint solution:
Install-SPSolution -Identity <SPSolutionPipeBind such as Bamboo.UI.Licensing.wsp
> -GACDeployment -AllWebApplications -CompatibilityLevel <your SharePoint level such as 15>
The article below gives you the details about the PowerShell command “Install-SPSolution”
https://technet.microsoft.com/en-us/library/ff607534.aspx
The article below gives you the details about the issue.
http://store.bamboosolutions.com/KB/Article.aspx?id=12474
Best regards
Sara Fan
TechNet Community Support

How to fix when restore. it error 4013?

hey guy. help me please. when i try to restore it error 4013 how to fix it please.

See this discussion: https://discussions.apple.com/message/23183544#23183544

How to fix Entry Point dll error?

Similar Messages

Maybe you are looking for