How to fix erorr 9
hello guys i have this problem for over month right when i try to restore my ipod 4g 64gig to 6.1.3firmware start normal to apple icon and bar under the icon like any normal restore after 20 sec shutdown in giving mr erorr number 9 in itunes and trust me i try everything in internet to fix i change the usb delete it itunes and installed back to pc i try do it in anthere pc try costem frimware nothing seem to work the pig problem is the are no apple shops close to me to repair it soo anyone can help me with this issue and thanks
(Sorry for bad englsih)
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Not knowing exacly what you tried.
Sayinfg everythng does not say WHAt you tried
If still problem, make an appointment at the Genius Bar of an Apple store .
Apple Retail Store - Genius Bar
Similar Messages
-
A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.
Hi 22chill,
I recommend that we delete and re-download the movie from your purchase history:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M. -
How I fixed my iTunes 7 / Nano 1.2 problem.
Like so many of you, I too lost the ability to connect my 4gb Nano to my iTunes when I upgraded to v7. Of course, Apple hasn't figured this out yet, but several here have.
Here is how I fixed mine. Once you connect the Nano (after the firmware upgrade), iTunes 7 reports it as corrupt and in need of a restore. The problem is that it won't. Try the following to fix the problem:
(note: this will reset your Nano entirely, and you WILL lose any music which is loaded on it. You will not lose whatever you have in iTunes).
1. Unplug the Nano USB cable and perform a reset on the Nano.
2. Restart your computer to ensure all services are running correctly.
3. Once restarted, open My Computer and plug in your Nano. Wait until it show's up as a disk drive (this can take several minutes).
4. Right-click on the drive which represents the Nano and wait again (up to several minutes) for the menu to pop up.
5. Select Format and (you guessed it) wait for the format utility to appear.
6. Make sure the File System is set to FAT32 then click Start. Do not click Quick Format. Wait some more (up to ten minutes. You'll see the progress bar move after a while).
7. Once finished, the Nano should now be recognized by iTunes. If it isn't, unplug it, wait a minute and replug it.
BTW, this retains the 1.2 firmware. I think the 1.2 firmware is incompatible with the data which written by previous versions. The format clears this data out.
As always, YMMV.
Good Luck,
Steve
HP Windows XP Pro P4 H/Tbump
I was having trouble seeing my Nano 2nd in iTunes and was afraid to do this step; but it works. My Nano was updated to version 1.1.1 and now everything seems to work perfectly. Keep in mind you will lose everything that is stored on your Nano when you format it.
Gateway 733mhz Windows XP -
How to fix applepushservice.dll issues for downloading iTunes on Windows 7 64 bit
I recently had iTunes crash on my home PC, Windows 7 64-bit. I have tried several attempts to uninstall and reinstall the program and it still does not work and I receive error messages. The latest: The program can't start because ApplePushService.dll is missing from your computer. Try reinstalling the program to fix the problem. Problem is, the articles that I have seen state this is an Unknown source and my firewall will not allow it to be installed. The original error was a Windows Error 7 (registry & .dll issues). Any suggestions on how to fix this problem?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Recently loaded Lion on my laptop and now my computer crashes often. Black screen and keyboard lights up. Any ideas on what's wrong and how to fix this?
Everytime this happens Ihave to power down and restart! Any ideas would be appreciated!
-
Hello,
I updated Xcode 5 to Xcode 6.0.1. It messed up my previous apps and i don't know how to fix it. Is it possible to uninstall Xcode 6 and go back to Xcode 5?I found this solution http://objcsharp.wordpress.com/2014/09/21/how-to-get-back-the-ios-7-sdk-after-up grading-to-xcode-6/
-
I cannot get the keyboard to come up on the ipad mini when in the citrix receiver. Has anyone ran into this and do you know how to fix it?
I am not familiar with Citrix Reciever but is it possible it is open or being used in another open app?
Try quitting all apps then try again.
Quit all apps: Double tap the Home button and swipe the app preview page up for each open app -
Does anyone know how to fix an error in cc photoshop on Win8 that says puppet warp could not complete request due to program error?
Questions on using a specific program should go in that program forum
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
in Firefox can not see the Downloads window, in the jump in the boot to be seen - the download speed
Downloaded much and now can not see how to fix it?I hate the new downloads-in-a-tab scheme. This was an unnecessary change in my book (if it aint broke, don't "fix it").
So in order to get it back, I performed the about:config browser.download.useToolkitUI change, but now all I get is a blank download window that pops up every time I download something.
Is there something else that I need to do? I've checked the change and it was saved, but it didn't resolve my issue as much as it just caused me a new issue. -
can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
I am unable to hear anything on my iphone 4 nor can the person i call hear anything when i speak -
I think that my ear piece and mike have both got magnetised how do fix the problem
Please helpI have the same problem!! It lead to many other problems with my phone
I just arranged a repair with apple. Yes its inconvenient to be without a phone for a while but if your phone is in warranty its good to get it looked at professionally! -
After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer and .mac account. Does anyone have any advice on how to fix this issue?
Welcome to the Apple Community.
Which OS are you using. -
HI folks,
See my requirement is need to setup in "A new custom field on the Line Item to hold the predefined values like: Max, Mini and Average for a sales Contract in the "SAP CRM Standalone", in the sense I need to create one new custom field for sales contact transaction,
So for that I tried to fix up EEWC (Maintain System Landscape) in the "sandbox" (SAP CRM Standalone) but every time I got an error like: User's System is not entered correctly, before go to EEWB we need to fix up EEWC right.
SO could you please guide me how to add a new custom field for a transaction in SAP CRM, how to fix up EEWC and EEWB,
This is a bit of high priority mark,
Cheers.Hi Yeseb,
This seems like the EEWC setting issue. Please check if you have maintained the following entries in the transaction 'EEWC'.
Two records need to be maintained in this transaction. One entry for CRM (Self Reference) and another for ECC ( RFC reference)
System: <Your CRM System ID>
Description: <Some meaningful Description>
Cust Sys: <X>
Syst. Type: <CRM>
Role: <Dev>
Logical System: <Your CRM System ID>
RFC Destination: <Leave Blank>
Namespace: <Z>
System: <Your ECC System ID>
Description: <Some meaningful Description>
Cust Sys: <X>
Syst. Type: <OLTP>
Role: <Dev>
Logical System: <Your ECC System ID>
RFC Destination: <Your ECC System ID>
Namespace: <Z>
To know your system ID and RFC destinations, check the transaction 'SM59' or contact the BASIS person in your team.
Once you are done with maintaining these values, try to use the EEWB all over again in the same way as you mentioned.
This should do. Please let me know.
Regards,
Kris. -
My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?
Hello there philp_69,
If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Thank you for using Apple Support Communities.
All the very best,
Sterling -
It takes a long time to open an app and sometimes it will just crash, any idea how to fix it?
My four year old Macbook Pro couldn't start yesterday and after going through solutions and all, it worked. But now it's freaking laggy and whenever I want to open an app, it takes a long time or the app will just crash. Any idea how to fix it? I really need the speed and everything back.
noeleeeen,
so you have an external hard disk, onto which you deleted/moved files from your internal hard disk, so that you now have 143 GB or so free on your internal hard disk — is that correct? Is the external disk purely for backups (e.g. a Time Machine destination), or does it function as a supplement to your internal disk?
Was it entirely your personal data files (documents, photos, movies, music, &c.) which you’d deleted or moved to the external disk, or did you also delete/move apps, libraries, &c. over there?
I’m not familiar with Echofon Lite, so I can’t comment on it, but an Apple-supplied app like the App Store shouldn’t crash.
Have you tried running Disk Utility yet, to see if its verification process gives your disks its seal of approval?
Maybe you are looking for
-
I would like to use the built-in Data Logging feature. There is the "Log at Completion" option, but is there a way to programmatically make a new log record while running? I looked around in VI server and couldn't find any methods that would do that.
-
Hi, I am getting the following error in system center orchestrator when I assign permission to the run books. I run the designer with my admin account. I have bounced the server and check for every possible thing I can think of and still getting this
-
HELP Needed ASAP! Curve Not Turning On, Red Flashing Lights!
Hi, I have a Blackberry curve 8310. I plugged my curve into my mac to do a software update. Midway through, my phone shut off and hasn't worked since. The battery is fully charged. The phone is off and won't turn on. Additionally, there is a red LED
-
I used WEB fonts in Muse for Russian language and they display correctly in preview. But then I have published site all fonts has stopped support cyrillic. Help me please if it possible )
-
Include directive with import tags how to
I mostly the same classes throughout many of my jsp pages. If I use the include directive to import the classes - it doesn't work. What is the proper directive / way / tag to include those tags? Sorry if I am not wording this properly. Here's an exam