How to fix error 1015 while restoring iphone 3G

how to fix error 1015 while restoring

This error is usually the result of hacking (jailbreaking) the iPhone. It is likely now bricked.
Error 1015: This error is caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple."

Similar Messages

  • HT1414 how to resolve error 1015 while restoring iphone3g to 4.2.1

    How to resolve error 1015 while restoring iphone 3g to ios 4.2.1

    This error is returned by jailbroken iPhones. Sorry, can't discuss such iPhones as per terms and conditions of this Forum.

  • HT1766 how to fix error 1015 on my iphone

    how to fix my iphone error 1015 and i could not re store

    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • HT4623 Error 1015 while restoring iphone 3 G 16GB

    An error encountered while resorting my i phone (ERR 1015). Phone cann`t be used unles restored.

    iPhone Error 1015:  http://lmgtfy.com/?q=iphone+error+1015

  • TS3694 how to fix error 3194 while restoring

    sorry i do not have any image for this problem. my screen goes black while i am trying to jailbreak my device

    Goto -- (Assuming That its not Jail Broken)
    My Computer --> C Drive--> Windows --> System32-->Drivers-->Etc--> Host File
    -Cut (remove) this host file and past it on desktop.
    -Now comeback to itunes - provided you have fresh itune installation after removing it COMPLETELY from your system (Ref- http://support.apple.com/kb/HT1923?viewlocale=en_US).
    -Plug in your iphone to  your windows via active USB port (no hub) and with good internet connection.
    - Repeat  the ios update process and avoid doing multitasking ( I was lil careful... :)).. And that worked for me ...updation took max 10 min's.
    - Once the ios updation process is done , follow the instructions and complete the ragistration process. restart your iphone and its on ios 6 EnJOY !
    - Put the HOST file back to its original  path.
    If this resolves your problem , Like it :-)

  • TS3694 i have show the error 1015 while restore the iPhone 3g

    i have show the error 1015 while restore the iPhone 3g

    The phone was jailbroken. You can't get help here. Discussing jailbroken phones is forbidden by the terms of service.

  • How to fix error 4450 while burning cd

    how to fix error 4450 while burning cd

    This error is usually the result of hacking (jailbreaking) the iPhone. It is likely now bricked.
    Error 1015: This error is caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple."

  • TS3694 error 1015 during restore iphone 3g

    error 1015 during restore iphone 3g
    please help

    Your phone was jailbroken or you are attempting to install an unsigned version of iOS.
    You can't get help here.

  • ITunes keep showing unknown error 48 while restoring iphone 4s. I've already followed applesupport suggestions of reinstalling iTunes, deleting previously downloaded ipsw on my computer and re-downloading it (countless times!) but still to no avail.

    Hi. A very much help needed.
    - iTunes keep showing unknown error (48) while restoring my iphone 4s
    - I've already re-install iTunes various times
    - Already delete previously downloaded 8.3 ipsw and re-downloaded it countless times
    - Changed and edited hosts in windows drivers as per shown on guides
    but... to no avail!!!!
    I am now without any phone to be used.
    HELP ME PLEASE

    Hello Sean,
    It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
    iPhone Repair - Other Repairs
    https://www.apple.com/support/iphone/repair/other/
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • HT3743 how to fix error 1015

    how to fix error 1015

    Look under the More Like This section on the right of this post, but generally this means that your phone has been jailbroken and there is nothing you can do.
    You have an unusable brick and might need to buy a new phone.

  • HT1414 how to solve error 1015 to restore software in iphone 3

    I tried to restore factory setting on my iphone 3 sortly after I bought on ebay. During restoring, all foftwares were ommitted and
    message was "iphone cannot instal lower softwares". When I tried to instal iphone software from itune, the messageas was "The iphone could not be restored.
    An unknown error occurred (10150".
    Is there any solution to restore my iphone 3?
    Sam

    Is it 1015 like you say in the subject:
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    http://support.apple.com/kb/TS3694#error1015
    I can't find an iTunes error 10150

  • HT4061 How to fix error 1015

    Welcome to Apple I like to machine Apple for any device portable
    My question how to fix my iPhone 3GS firmware 3.0
    This problem error 1015

    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    BTW, you posted in the iPad forum.

  • How to pass error message when restoring iPhone on iTunes?

    I am trying to restore my iPhone on iTunes. But since I have update my MbP to OSX 10.8.2 I can not get passed an error message on iTunes after it is done extracting the software and is contacting iTunes. I have wifi and everything works fine. I heard it could be a host issue, but I have no idea how to fix it? Any help would be appreciated.

    Hi ,
    message table for call transaction
    DATA: BEGIN OF G_T_MSG OCCURS 0.
            INCLUDE STRUCTURE BDCMSGCOLL.
    DATA: END OF G_T_MSG.
    Exucute transaction via Call Transaction
      CALL TRANSACTION  'FB01'
                     USING g_t_bdcdata
                     MODE g_l_mode
                     UPDATE 'S'
                     MESSAGES INTO g_t_msg          .
    errors will be stpored in the table g_t_msg ..
    Thanks .

  • TS3694 how to fix error 1015

    How can I fix a 1015 error when trying to restore my iPhone3G?

    Error 1015 means the phone was jailbroken. Jailbroken phones can not be discussed here.
    The only suggestion we can make is to put the phone in DFU mode and restore it. (google for instructions on how to put the phone in DFU mode)

  • Error 1 while restoring iphone 4S 5.0.1

    My Iphone4S always show seaching network than i send back to
    my Network Services Centre and they say need to upgrade to 5.0.1 (9A406)
    thus I ask them help me upgrade unfortunaly iTunes always show the message
    unknow Error 1 ?
    How do fix this Error??? Should i ask my Network distributed to replacement a
    new iphone to me??

    In your scenario, probably you have to put your 4S in DFU mode (Device Firmware Upgrade) instead of restore (recovery mode)
    DFU mode is a little different, to put your device into DFU with the iTunes icon with that cord on your screen,
    Prerequisites:
    Charge your battery to a decent percentage, I'd say 90% at least
    Get build 9A406
    IMPORTANT: USE A USB PORT THAT'S working constantly, NOT one that undetects-redetects your device constantly, a malfunctioning USB used to upgrade your iPhone may brick it.
    Make sure if your computer is a laptop, it isn't going to shut down anytime
    Working internet
    If your computer has the 9A405 firmware, delete it. in windows 7, its in a hidden folder (c: username->appdata->roaming->apple computer->iTunes->iPhone Software updates)
    Steps to upgrade your firmware to the later build
    When everything's ready, connect your iPhone to your USB
    Hold power button and home button for 10-11 seconds
    Hold on to home button but let go power - another 10 seconds so 20 seconds in total for step 2 and 3
    iTunes should say something like "an iPhone is detected to be in DFU.... please restore your iPhone bla bla bla"
    If you placed your firmware on a custom location, hit shift+restore button on iTunes, if not, just restore.
    DFU mode will allow your computer to override your firmware on your iPhone
    Restore mode means does nothing to your firmware, just deleting and resetting all settings and putting everything in place.
    DFU mode pic:
    Does it help?
    I googled and this article on the web might help you.
    http://www.letskis.com/how-bypass-error-itunes/

Maybe you are looking for

  • Condition not updating in Sales Document.

    Hi, We have created a Conditon type ZEX2, a copy of JEX2 with negative value for Deemed Exports. It is working fine in Quality server but not working in PRD Server. Analysis says Condition record not found. Some times it says condition record exists

  • Contact pics not displaying in Messenger

    Is this a prolem with BB 6.0?

  • IMac Loses Airport Connectivity

    Hi, I have two identical 20" Intel Core Duo iMacs (see hardware review below). One is at home and the other at work. I have been experiencing a problem on both computers where my Airport connection drops "randomly". After the connection is dropped AL

  • Business number is now residential but still liste...

    Hi everyone, apologies if this has come up in another post but I couldn't find anything! When I moved house BT issued a new landline number, it turns out it previously belonged to a business which still lists the number on multiple google search resu

  • Console filling with "FireWire GUID 0000000000000000 is invalid!"

    Hello all. I would appreciate any help I can get. I know just enough to be a danger to my system. Im on my 2.4 Ghz Core 2 Duo MacBook Pro. 4 GB mem, OSX 10.7.5. Software is up to date as of yesterday. Here's the problem. When I wake machine up, withi