How to fix error 4450 while burning cd

how to fix error 4450 while burning cd

This error is usually the result of hacking (jailbreaking) the iPhone. It is likely now bricked.
Error 1015: This error is caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple."

Similar Messages

  • How to fix error 1015 while restoring iphone 3G

    how to fix error 1015 while restoring

    This error is usually the result of hacking (jailbreaking) the iPhone. It is likely now bricked.
    Error 1015: This error is caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple."

  • TS3694 how to fix error 3194 while restoring

    sorry i do not have any image for this problem. my screen goes black while i am trying to jailbreak my device

    Goto -- (Assuming That its not Jail Broken)
    My Computer --> C Drive--> Windows --> System32-->Drivers-->Etc--> Host File
    -Cut (remove) this host file and past it on desktop.
    -Now comeback to itunes - provided you have fresh itune installation after removing it COMPLETELY from your system (Ref- http://support.apple.com/kb/HT1923?viewlocale=en_US).
    -Plug in your iphone to  your windows via active USB port (no hub) and with good internet connection.
    - Repeat  the ios update process and avoid doing multitasking ( I was lil careful... :)).. And that worked for me ...updation took max 10 min's.
    - Once the ios updation process is done , follow the instructions and complete the ragistration process. restart your iphone and its on ios 6 EnJOY !
    - Put the HOST file back to its original  path.
    If this resolves your problem , Like it :-)

  • I got an error message while burning a cd in itunes - "The attempt to burn a disc failed.  The burn failed because of a medium write error.  What is that and how can i fix it?t

    I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed.  The burn failed because of a medium write error."  What does this mean and how do I fix it?

    The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.

  • Error 4450 whilst burning playlist,how can i fix this?

    constant error 4450 when burning playlists in itunes. Running on windows XP. How can i fix this ?

    CD Burn Error 4450 - solved!
    See if this helps.

  • How to fix error 2? my phone got it when firming software update while restoring.

    How to fix error 2? my phone got it when firming software update while restoring.

    Hi Elzani Jasmine,
    Thanks for getting the error number.  Here is an article for suggestions with specific error numbers.
    Resolve iOS update and restore errors
    http://support.apple.com/kb/ts3694
    Note it links to the following for things to try first.
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/TS1275
    Thank you for thinking of Apple Support Communities for your support needs.
    Nubz

  • Please help me how to fix error 53 iphone 6 ios 8.1

    please help me how to fix error 53 iphone 6 ios 8.1 when update iphone 6

    Hey there fcaride,
    It sounds like you are unable to finish restoring with iTunes due to this error -1 message. Usually that is associated with security software. Use the steps from the following article to help with that:
    Get help with iOS update and restore errors
    Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
    Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Make sure that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    If the issue persists, I would next use the last section of the following article titled "If your device turns on but gets stuck during start up"
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • How to fix error 16 on Itunes?

    how to fix error 16 on Itunes? I have an iphone 5c

    Get help with iOS update and restore errors
    Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
    Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Make sure that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • How to fix error (-54) itunes

    how to fix error (-54) itunes ?

    == Error -54 ==
    From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Some of the old codes still apply to OSX although there is no formal list of OSX error codes.)
    First, try simply restarting your computer.
    iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814
    Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
    Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
    Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad.

  • How to fix error 4310

    How to fix error 4310

    I am having the same problem. No changes to iTunes has helped. Drivers are updated. Windows Media Player works fine
    Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
    ASUSTeK COMPUTER INC. X55CR
    iTunes 11.0.2.26
    QuickTime not available
    FairPlay 2.3.31
    Apple Application Support 2.3.3
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 002BB4A809A7B190
    Current user is not an administrator.
    The current local date and time is 2013-04-07 14:32:30.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 11.0.2.26 (x64) is currently running.
    iTunesHelper 11.0.2.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.3.0),
    E: PIONEER DVD-RW D, Rev
    Audio CD in drive.
    Found 10 songs on CD, playing time 37:05 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 04:48:53
    Track 3, start time 07:12:15
    Track 4, start time 10:11:56
    Track 5, start time 14:14:06
    Track 6, start time 17:54:42
    Track 7, start time 21:45:13
    Track 8, start time 26:11:66
    Track 9, start time 29:55:71
    Track 10, start time 33:58:26
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 4.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.
    The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive E: PIONEER DVD-RW D on CDR media at speed 10X.

  • HT201413 how to fix error type 21?

    how to fix error type 21?

    Hi ekafrommiami,
    Thanks for visiting Apple Support Communities.
    You may find the steps in this article useful for troubleshooting the error you're seeing:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    Best,
    Jeremy

  • An error occurred while burning the disc.

    I tried to burn some stuff onto a DVD today with my PowerBook. Here's the info on the burner:
    MATSHITA DVD-R UJ-845E:
    Manufacturer: MATSHITA
    Model: MATSHITA DVD-R UJ-845E
    Revision: DMP2
    Serial Number:
    Drive Type: CD-RW/DVD-RW
    Disc Burning: Apple Supported/Shipped
    Removable Media: Yes
    Detachable Drive: No
    I bought some DVD's on sale at Radio Shack, and when I tried to burn a movie and a few photos onto a disc, the progress bar showed it starting to burn, then it stopped and I got this message:
    "An error occurred while burning the disc. This disc cannot be used."
    A little research here at the Apple forum brought me to this site:
    http://www.digitalfaq.com/media/dvdmedia.htm
    And after downloading a little program called DVD Media Inspector, I was able to classify the DVD's I had bought as:
    "4TH CLASS MEDIA:
    Pathetic garbage media, landfill material, about 0-50% success rate...."
    OK, off to Mega Lo Mart, where I bought some nice, expensive Maxell DVD's.
    Media Inspector doesn't see my fancy new DVD's. When I try to burn stuff using the Finder, I get the same result as before.
    Getting desperate at that point, I located and downloaded updated firmware for my model of Matshita superdrive. I'm not sure what firmware is, and there was a free range one and a standard one, so I went for the standard one. There were dire warnings in the readme file about "flashing" a superdrive being on the same risk level as open heart surgery. I flashed my superdrive. (You can say that here, and it's not dirty.)
    I also tried burning using iDVD, and after much preparation, it started to burn, then spit out the DVD. I tried three of the landfill DVD's and two of the Maxell ones. I'm out of things to try. Any ideas?
    I have never tried burning DVD's before. Am I doing something wrong?

    I tried again using iDVD's One-Step DVD making feature. It will let you make a one step from a movie file, and I had a .dv version of the movie I want to burn.
    It encoded video for a while, encoded audio for a little while, then started to burn. The superdrive made some noises, then the DVD was ejected and I got an error message saying:
    "Burning Finished
    Errors were found during the burning process"
    I hit OK (though it really wasn't OK) and got another error message box. This one said:
    "Multiplexer error
    (some message about multiplexing problem)"
    The message didn't make sense to me, and I was unable to remember it. What's a multiplexer? I would have guessed an avid movie-goer, but somehow I think that is not it.

  • Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

    Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

  • Does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g

    does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g

    See:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • How to fix error 3914 of itunes for windows...?

    How to fix error 3914 of itunes for windows...?

    Queries1 :- Where i need to type the above command to get the version of cygwin and make.From the command prompt -- Make sure that the Cygwin Bin directory is set in the Path (Refer to the same doc, 7. Add Cygwin Bin Directory to Path). You could also search for make.exe file to verify the directory where all those executable files are located.
    Thanks,
    Hussein

Maybe you are looking for

  • Why did you drive your CEO out because he doesn't support LBGT? Now I can't use your browser because I don't support YOUR decision.

    Who and what your CEO supports is his own personal business and should have nothing to do with whether or not he is capable of running your business. I'm sick of the PC environment in this country and I think it's sad that so many good companies are

  • Errors When Starting Up Examples Server

    I am using WebLogic Server 6.1 on Windows NT4. When I tried to start the Examples Server, I got the below following error messages. Does anyone have a clue what causes this? Thanks a lot! <Application examples:Name=security,Type=Application not found

  • Which SQL editor supports Multilanguage insertion

    Hi, Which editor will support multilanguage insertion to oracle database. I have tried Toad, it doesn't support insertion as well as display SQL Developer, will display multi language dispaly but not supporting the insertion. On insertion it shows ju

  • Freehand MX font handling

    Hi, sorry if this has been discussed previously, I'm new. Could anyone suggest a way to fix the fact that some of my files are displaying perfectly regarding fonts in Freehand 10 (and under) yet not Freehand MX? This is in Classic and OSX. On some ma

  • Broadband usage IMPOSSIBLE!

    Hi all, i'm a new customer to BT having signed up to an Infinity 1 & TV package from 17.06.14. I am after a bit of feedback to an issue which has become apparaent from the outset of my service connection, and which i'm getting exceedingly concerned a