How to fix - Error initialising RoboSource SCCAPI connection

When I open my project in RoboHelp 7 HTML, I get the little RH Adobe RoboHelp 7 HTML window that sits there for about 5-10 minutes. Then, I get a RoboSource SCCAPI error that says, "Error initialising RoboSource SCCAPI connection. Please contact RoboSource Technical Support." When I click OK in that message (the only button you can click), then my project opens normally and I can work in it and save like normal. That error message makes me nervous, though. Does anyone know what is wrong and how to fix it? Thanks in advance for your help!

Somebody played around with RoboSource and then said "Never mind"?
That is, RoboSource is not actually running on a server, even though this RH project might once have been associated with it for test purposes.
As long as your changes are being saved and output is being properly updated, I think I'd ignore the issue.
Good luck,
Leon

Similar Messages

  • How to get rid of Robosource SCCAPI connection

    Hi everybody,
    I am getting an error "Error initializing RoboSource SCCAPI connection" every time when i start MS Visual Studio 2008. After launching, it also asks for RS03 MiddleTier Service, though I have disabled it in the services settings.
    How can I get rid of it?
    What is the connection between RoboHelp (SCCAPI connection) and Visual Studio?
    Wht is the RS03 MiddleTier Service?
    thanks,
    Andy

    Hi there
    Just an educated guess here. I believe the RSO3 Middle Tier is (or may be) related to RoboSource Control. Either that or it's related to RoboHelp's built in ability to work with other source control systems.
    So how did you disable it? I'd like to but as yet have never actually found where I can!
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g

    does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g

    See:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • Please help me how to fix error 53 iphone 6 ios 8.1

    please help me how to fix error 53 iphone 6 ios 8.1 when update iphone 6

    Hey there fcaride,
    It sounds like you are unable to finish restoring with iTunes due to this error -1 message. Usually that is associated with security software. Use the steps from the following article to help with that:
    Get help with iOS update and restore errors
    Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
    Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Make sure that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    If the issue persists, I would next use the last section of the following article titled "If your device turns on but gets stuck during start up"
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • How to fix error 0X80092013

    Any ideas how to fix error 0X80092013?  I cannot connect to I Tunes Store.

    Hi there mlbfromca!
    I have a couple of articles here that can help you troubleshoot your connection to the iTunes Store. First, this article outlines the basic steps for troubleshooting an issue with your connection to the iTunes Store:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Be sure to note the steps for continuing troubleshooting at the end of the article if the issue is still unresolved:
    If the steps above did not resolve your issue, be sure that your specific alert is not listed in iTunes: Possible iTunes Store errors. Then, if your issue is still unresolved, follow steps in iTunes: Advanced iTunes Store troubleshooting.
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • How to fix error 16 on Itunes?

    how to fix error 16 on Itunes? I have an iphone 5c

    Get help with iOS update and restore errors
    Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
    Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Make sure that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.

  • HT201413 how to fix error type 21?

    how to fix error type 21?

    Hi ekafrommiami,
    Thanks for visiting Apple Support Communities.
    You may find the steps in this article useful for troubleshooting the error you're seeing:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    Best,
    Jeremy

  • How to fix error 3914 of itunes for windows...?

    How to fix error 3914 of itunes for windows...?

    Queries1 :- Where i need to type the above command to get the version of cygwin and make.From the command prompt -- Make sure that the Cygwin Bin directory is set in the Path (Refer to the same doc, 7. Add Cygwin Bin Directory to Path). You could also search for make.exe file to verify the directory where all those executable files are located.
    Thanks,
    Hussein

  • How to fix error 2063 in muse

    how to fix error 2063

    You need to provide more information such as when you are getting this error and the exact error message.
    However, when getting any errors first thing to do is make sure you have the latest version of Adobe Air installed. That almost always fixes it.

  • How to fix  Error Code: U43M1D204?

    How to fix  Error Code: U43M1D204? When trying to update.

    Hi There,
    Kindly check the name and version of update and try to install there patch manually from the below mentioned links.
    All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
    All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
    If you are not able to install the patch,Kindly try
    Enabling and using the "root" user in OS X - Apple Support
    Hidden Admin (Windows): Enable and Disable the Built-in Administrator Account (Standard 7 SP1)
    You can also try :Troubleshoot update issues | CS5, CS5.5, CS6
    Thanks,
    Atul Saini

  • How to fix error 16 in Adobe CC?

    How to fix error 16 in Adobe CC?

    Hi Parag,
    Try to follow the steps given in the article.
    Configuration error | CC, CS
    Hope this helps.
    Regards,
    Sumit Singh

  • How to fix error 2? my phone got it when firming software update while restoring.

    How to fix error 2? my phone got it when firming software update while restoring.

    Hi Elzani Jasmine,
    Thanks for getting the error number.  Here is an article for suggestions with specific error numbers.
    Resolve iOS update and restore errors
    http://support.apple.com/kb/ts3694
    Note it links to the following for things to try first.
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/TS1275
    Thank you for thinking of Apple Support Communities for your support needs.
    Nubz

  • How ti fix error 2001 in ipod

    How to fix error 2001 in ipod pls pls tell

    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT201210 how to fix error 13

    my iphone has stuck in the recovery mode and not giving a apple logo.and how to fix error 13

    hardware failure take it to apple to fix

  • TS3694 how to fix error 1510

    how to fix error 1510

    Do you mean  ERROR 1015... If so...
    This Error Code is indicative of the Device being jailbroken / Hacked...
    Sorry... But...
    The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
    You will need to look elsewhere.

Maybe you are looking for

  • How to Restrict Max Recipient for Inbound in Exchange 2010

    Hi, I want to restrict my inbound mails which is having more than 10 recipients (it may be TO,CC & BCC) in my Exchange 2010. I set the limit to 10 in the following area. 1.Mailbox 2.Organization 3.Connector (for Receive connectors only) 4.Transport s

  • MS Project 2007 files crash after converting to .PDF files

    Need some help. Currently I create complex projects schedules (3-7 pages in length) and then convert to a .PDF thru Adobe Acrobat 8.1STD and although it takes a little bit, it does create the .PDF file. However when I open in Adobe Reader and try to

  • BAPI for Reset deletion ind. for PO Item using ME22

    Hi Experts, I want to go to Tcode ME22 to Undelete PO Item,    ME22 -> Edit -> Reset deletion ind. I have used BDC, and tested successfully. But you know, BDC is not a very good method, and I want to find a BAPI  for it. Anyone could help me ?  Give

  • Photoshop CC 3D - placed bitmap image on extruded surface goes nasty when rendered

    The extruded face with System Copy on it has gone really nasty. It looked great before I rendered it! Here's it's sister, which I daren't render... This is a production project - so I'm VERY ANXIOUS TO FIX IT!!!!

  • Update Date Pool ???

    The update to Jive 4.5.6 is schedule for "sometime" this month... anyone want to bet on when? I pick the last week, 9-25 thru 9-30