How to fix file system error 56635 in windows 8.1

heelo pls help me to fix this problem i cant install any on my laptop.
file system error 56635 is showing  up wen i install my kaspersky 2015

Hello Jay,
The current forum is for developers. I'd suggest asking non-programming questions on the
Office 2013 and Office 365 ProPlus - IT Pro General Discussions  forum instead.

Similar Messages

  • Resized partitions how to fix file system to new size.

    So I had to resize my /boot partition which required me to resize my root partition. How do I fix the file system to match the new size of the partition?

    I do not understand why this was moved? This is not a new install, I was tuning my hooks to use systemd replaceing udev, autodetect and base.
    running
    mkinitcpio -p Linux
    resulted in an error that said there was not enough space. and that the image was probably not correctly made.
    I based my decision on the placement of the post by the following post which seemed to be in the same category.
    https://bbs.archlinux.org/viewtopic.php?id=173359
    Is there a place that provides a more narrow definition of topics that are acceptable for fourm categories?

  • File system error: The record ID is incorrect. Physical file: . Logical file:

    Hi,
    I face this error message when I try to 'process update' a dimention, sometime it works but sometime it failed with the error below:
    Description: File system error: The record ID is incorrect. Physical file: . Logical file: . 
    My environment: Window Server 2008 R2+SQL Server 2008 R2.
    Note: this issue can be resolved by full cube process, but I can't to that every time if it failed, just want to know what happen at backend of SSAS, It block me neary 2 week without any finding, really appreciate that someone can help on this.
    I have do some research with google, I think the root cause here is not TopCount function(It may be a problem with SQL Server2005), also not the size limitation of 4GB size of .astore file.(I check the size of my cube under 'Data\XXX.db\' folder, which only
    have few MB size).
    Thanks,
    Tom

    Hi Tom,
    Here is a microsoft fix
    FIX: "File system error" occurs when you try to run a process update operation on a dimension in Microsoft SQL Server 2008 Analysis Services and in Microsoft SQL Server 2008 R2 Analysis Services
    In your acenario, in order to fix this issue, please apply the latest Cumulative update and Service Pack according to your SQL Server version. Besides, there are two workarounds in that fix, plese try it and check if it works or not.
    http://support.microsoft.com/default.aspx?scid=kb;en-US;2276495
    Regards,
    Charlie Liao
    TechNet Community Support

  • HT1199 I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

    I need your help, PLEASE. How can to fix "NO MOUNTABLE FILE SYSTEM" error of my back up hard drive on Mountain Lion OS?

    Did you format the drive for Mac use before you tried to use it as a backup drive?
    Are you using Time Machine on the drive? You can't view the contents of its backup database and the only way to access the info is directly from the Time Machine app.

  • File system error message

    When I try to delete a media file it says file system error. Anyone know what this is and how to fix it? Thank you!

    First off, your question really doesn't belong in this topic; you should post in something more appropriate.
    That said ...
    Where is the file located?  On a microSD card or on the BB.  How are you trying to delete it?
    Message Edited by AndyDufresne on 09-10-2008 11:39 PM
    If you've found a solution through a post; please mark it as a solution.
    If someone's was particularly helpful, give them kudo's!.
    Get busy living, or get busy dying.
    http://blog.port3101.org/hdawg/

  • File System error while restoring a backup from analysis server to another

    Hi
    I have restored an analysis database backup to from server 1  (sql server 2008) to server 2(sql 2008) and its working fine 
    and now am trying to restore another database from analysis server server 3 (sql 2005) to  server 2 (sql 2008 )but its giving error that 
    File System error occured while opening the file G:\ProgramFiles\MSAS10.MSSQLSERVER\OLAP\Backup\Workordermodule.0.db\WomDW1.7.00 ..etc

    Hi Maverick,
    According to your description, you are experiencing the error when restoring the SSAS 2005 database on SSAS 2008 server, right?
    In your scenario, how do you backup your SSAS 2005 database? Please ensure that you backup and restore steps are correct. Here is a blog which describe how to migrate a cube in SQL Server Analysis Services 2005 to SQL Server Analysis Services 2008 step by
    step, please refer to the link below.
    http://blogs.technet.com/b/mdegre/archive/2010/03/31/migrating-a-cube-in-sql-server-analysis-services-2005-to-sql-server-analysis-services-2008.aspx
    Besides, you can import SQL 2005 AS database in SQL 2008 BIDS Project. Then fix AMO warnings and deploy that database on SQL 2008 Server.
    http://technet.microsoft.com/en-in/library/ms365361(v=sql.100).aspx
    Regards,
    Charlie Liao
    TechNet Community Support

  • Analysis Services failing to Start . File system error: Error occurred during the creation of directory

    Hello All,
    Posting this problem here and hoping for a solution from the experts in this forum.
    When i have restarted the Analysis Services , i see that it has been stopped but never started back. It fails with an error
    "The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
    When Checked the Event Viewer i see the following error -
    The service cannot be started: The following system error occurred:  The filename, directory name, or volume label syntax is incorrect.  File system error: Error occurred during the creation of directory: '\\?\E:\OLAP\MSSOLAPFactory\OlapData;M:\Test
    Backup'.
    I remember changing the BackupDir value of Analysis Services few days back, and i think it could have impacted. Can you please help me how can i change back the BackupDir value and have the server back?
    Let me know if you need any more details
    SG

    Is this still an issue? If so, I would find msmdsrv.ini and make sure you don't have two folders listed in the BackupDir (or DataDir or TempDir). You'll have to runas Administrator to edit the msmdsrv.ini file and save changes. Once you fix that, it should
    succeed.
    http://artisconsulting.com/Blogs/GregGalloway

  • File system error on Zen MuVo

    Hi,
    When I switch on my player a message come on the screen saying "file system error", does anybody know how to fix this problem?
    Thanks

    Try downloading the latest driver and firmware from the website. Install the driver file. After you have installed the driver, press and hold the PLAY button, continue holding the button while inserting the player into the USB port for about 0-5 sec. Run the firmware update file and check/tick the 'Format Data Area' check box and click on 'Start'.

  • PI 7.11 - How to create a System Error in SXMB_MONI using a Java Mapping

    Hi
    We ve go a  Java Mapping in a File-to-HTTP Scenario. It works perfect except of one error case: if an empty source file or a source file with the wrong structure is delivered. In this case our Java Mapping forwards an empty payload to the HTTP channel. So, for PI is the mapping successful.
    I'd like to recognize this case and invoke a system error in the SXMB_MONI, so that this mapping will be stopped and our alerting concept informs the users. I know, how to recognize the case in Java but need to know how to create the System Error Status in the PI System.
    Thanks in advance
    Michael

    Hi Michael,
    Please refer here for the mapping API description:
    http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/package-summary.html
    You can use the StreamTransformationException exception describet there to raise an error from your Java mapping. Direct link:
    http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/StreamTransformationException.html
    You might also consider using the "Empty-File Handling" option in sender file CC to avoid processing empty files by PI.
    Hope this helps,
    Greg

  • How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

    How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

    First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
    You can find it here:
    [Ann] Identify Your InDesign File
    If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
    In regards of the script showing a result for InDesign files higher than CS6:
    CS7 = CC v9
    CS8 = CC v10 = CC-2014 or CC2014.1
    Uwe

  • Hepl !!! "File system error" on the Muvo TX FM 128

    every time, I turn on my MP3 player, display "file system error" on the monitor and then it turn off. I was download firmware latest (ver. .9.0) to reinstall flow introduction. But it'sdidn't complete, and display error on the board: "please put device in recovery mode before running firmware update", althought I was connect mp3 player to PC. I was also format mp3 player several time before, but have no changed !Please tell me how the way to solve this problem!?

    Recovery Mode is needed as per the message.
    Download and install drivers.<
    Press and hold Play button while connecting to PC.<
    Keep holding Play until New Hardware Wizard starts.<
    Complete driver installation.<
    The run firmware upgrade.<
    During upgrade select Format Data Area check box.<
    PB

  • File system error on MuVo TX

    After I transfer files to my MuVo TX FM, and I try to play the music, I get a message "File System Error. I have followed the instructions and formatted again, but I still get the message. Any suggestions?

    This is a post by Surfn, which helped me:
    I've had a similar problem with MuVo TX that is about one year old. When I let the battery run down low, I started having the problem. First what didn't work, then what worked:
    -Replacing the battery didn't work.
    2-Trying to turn it on gave "File System Error."
    3-I am on Windows 2000 OS. When I tried to click on the removable dri've in Windows explorer, it caused that program to freeze up.
    4-When I tried to double-click on "My Computer" and right-click on the removable dri've and select "format," nothing happened.
    5-When I tried to download the latest firmware and install (with the device plugged into the USB port), after a long time of searching it said that no devices were found.
    This is what WORKED for me: I downloaded the firmware NOMAD MuVo TX Audible Firmware Upgrade .0.05 from http://www.nomadworld.com/downloads/drivers When I ran this self-extracting executable, it gave some comment to the effect of "searching for devices." At this moment I held down the pause/play button and plugged the MuVo into my USB port and continued to hold the button down for another 5 to 20 seconds. This was how I was able to finally get it to find the device. At this point I was able to follow the rest of the instructions that were posted previously: check/tick the 'Format Data Area' in the dialog box and click on 'Start'.
    I think I ran the firmware executable a second time without checking 'Format Data Area' in order to make sure the Firmware was installed on the newly formatted flash dri've, but I might not have needed to do that last step.
    This has gotten me up and running where none of the other suggestions worked for me. I hope this works for you.
    I am happy to say that my muvo is working fine now.
    The only thing that I didn't do exactly like surfn described is that I didn't
    press the play/pause button during the detection of the mp3 player.
    I tried pressing the button, but the player was not detected, so I decided
    not to press it and see if it works.
    The player was detected, I selected the "Format data area" option, and pressed
    start. It worked like a charm.

  • File System Error on Muvo Slim 51

    Hello. Up until a couple of months ago my player was working fine...until the dreaded file system error message.
    I have a macbook and I have only seen solutions for this problem using Windows platform.
    Can anyone offer any advice... the player is not even showing up in my disk utility when I plug it in.
    Thank you!

    Hi Jason. I forgot to mention this. Windows XP does not format the player. As a matter of fact, the context menu that pops up when right-clicking the storage icon (representing the player) in My Computer pops after a minute or two. Something must be wrong. When I look at the Properties of the storage representing the player, it's capacity is nil with file system as <EM>Raw. </EM>I tried Partition Magic 8 in a friend's pc but it seems that external storage is not recognized or at least I don't know how to use the software. My analysis is that this is similar to the case when you partition a hard dri've during installation of Windows XP Pro (at least on my experience) and forget to specify the file system of the other partitions. Those partitions wont be visible in the disk management tools of windows. I will try your suggestion and update this thread on my progress.
    Thanks very much

  • File system error on IX4-300d

    Hi all. I got message "File system error. You must perform file system check". How can I do it? 
    Sorry for my English.

    Hi. Can you tell me how to run fsck command. I have the same problem with the drive and I get the same error :
    "The file system on your Lenovo ix4-300d has errors and needs to be checked".
    I have 2 Hard disks both of 3 TB in simple configuration. The suggestion of file system check did not work. I tried your method of SSH into the hard disk. However I cannot complete the process as I got the following error:
    root@DataVault:/# fsck -y /dev/sdb2
    fsck 1.42.5 (29-Jul-2012)
    e2fsck 1.42.5 (29-Jul-2012)
    /dev/sdb2 is in use.
    e2fsck: Cannot continue, aborting.
    This is consistent with sdb1, sda1 & sda2
    Also I have provided the parted -l info below:
    root@DataVault:/# parted -l
    Model: ATA ST3000DM001-1CH1 (scsi)
    Disk /dev/sda: 3001GB
    Sector size (logical/physical): 512B/512B
    Partition Table: gpt
    Number  Start   End     Size    File system  Name     Flags
     1      33.6MB  21.5GB  21.5GB               primary
     2      21.5GB  3001GB  2979GB               primary
    Model: ATA ST3000DM001-9YN1 (scsi)
    Disk /dev/sdb: 3001GB
    Sector size (logical/physical): 512B/512B
    Partition Table: gpt
    Number  Start   End     Size    File system  Name     Flags
     1      33.6MB  21.5GB  21.5GB               primary
     2      21.5GB  3001GB  2979GB               primary
    Model: SanDisk Cruzer (scsi)
    Disk /dev/sdc: 16.0GB
    Sector size (logical/physical): 512B/512B
    Partition Table: msdos
    Number  Start   End     Size    Type     File system  Flags
     1      16.4kB  16.0GB  16.0GB  primary  fat32        lba
    Model: Linux device-mapper (linear) (dm)
    Disk /dev/mapper/9aee462_vg-lv3a09ce04: 5958GB
    Sector size (logical/physical): 512B/512B
    Partition Table: loop
    Number  Start  End     Size    File system  Flags
     1      0.00B  5958GB  5958GB  ext3
    Model: Linux device-mapper (linear) (dm)
    Disk /dev/mapper/md0_vg-vol1: 17.2GB
    Sector size (logical/physical): 512B/512B
    Partition Table: loop
    Number  Start  End     Size    File system  Flags
     1      0.00B  17.2GB  17.2GB  ext3
    Model: Linux device-mapper (linear) (dm)
    Disk /dev/mapper/md0_vg-BFDlv: 4295MB
    Sector size (logical/physical): 512B/512B
    Partition Table: loop
    Number  Start  End     Size    File system  Flags
     1      0.00B  4295MB  4295MB  ext2
    Error: /dev/mtdblock0: unrecognised disk label
    Error: /dev/mtdblock1: unrecognised disk label
    Error: /dev/mtdblock2: unrecognised disk label
    Error: /dev/mtdblock3: unrecognised disk label
    Error: /dev/mtdblock4: unrecognised disk label
    Error: /dev/mtdblock5: unrecognised disk label
    Error: /dev/mtdblock6: unrecognised disk label
    Error: /dev/md0: unrecognised disk label
    Error: /dev/md1: unrecognised disk label
    root@DataVault:/#
    Any help would be greatly appreciated.
    Thanks in advance

  • FILE SYSTEM ERROR on my zen nano p

    <font face="Comic Sans MS" size="4" color="#6633ff">my zen nano plus says File system error everytime i turn it on then it automatically turns off. what could i do to fix it's?

    Welcome to the world of processor-controlled gadgets. To get the best out of your product you are going to need to learn about things such as firmware - try Wikipedia for a description. Anyway, go to Support->Downloads and choose the Nano Plus from the lists. On the next page is a section for firmware - download the firmware file to your PC then connect your player and run the firmware file. During the process you will see a Format Data Area check box - you need to tick this box and continue. PB

Maybe you are looking for