How to fix flash reflecting off of wall in background?

I'm trying to remove the flash bouncing off of the back wall of an image. When I try brushing over it and lowering its highlights / exposure it just turns a mucky grey. Not sure how to proceed. Help!

Flash reflecting off the background is one of those gotchas that is difficult to fix. For me, it's even difficult to do it in Photoshop. The real key is to use bounce flash, or angle yourself so that you're not shooting directly against the background. Easy to say after-the-fact, I know. I tried fixing a photo of my daughter and granddaughters that had a glaring reflection from the wall. I tried several different approaches that ended up looking worse than the reflection. But then, I'm not a real "high end" photo finisher when it comes to those types of problems.

Similar Messages

  • HT1366 How to fix Flashing Folder with Question Mark on Mac

    How to fix Flashing Folder with Question Mark on Mac

    RichardEL is probably correct.  I’ll go through your questions.
    > there is no Mac OS partition, I assume it would be directly underneath the HD on the left?
    I have not seen this particular condition where the hardware disk icon appears but the system volume that is supposed to be below it does not.  The System Disk partition would be below the HD icon indented to the right.  It is usually called “Macintosh HD” unless you renamed it.
    > when I go into disk utility my HD appears on the left, but I can repair or verify it
    Odd.  It appears but you cannot manipulate it with Disk Utility.
    > The S.M.A.R.T status reads verified
    If it did not say Verified then it would indicate a problem.  Saying Verified does not rule out problems but I think it indicates it is still breathing.
    > Is the HD deceased?
    If you booted the Recovery Partition (Boot, Command-R), which it sounds like you did, then at least part of the disk is still breathing.  If it took a long time to boot then that may have been a Network Recovery boot which would indicate the disk is very sick or dead.
    >  [If I] restore from time machine [will] everything will be back as it was before?
    Yes.  That is the beauty of Time Machine.  All your data, applications, and system preferences will be as they were as of the last backup.
    > I was thinking of erasing the HD, would this be of any help or do I just need a new one?
    Given what you reported from the Disk Utility steps you took it is unclear to me if there will be a way to repair the current volume, if you can erase and install from scratch or if you need a new disk.  Before proceeding it may be useful to have an expert at an Apple store look at it for you.  They may be able to revive it without a clean install or new disk.
    As was the case above, it could be a good disk with a bad cable in which case a new disk is not going to help.  To test this you can purchase an inexpensive external enclosure, remove the internal disk, place it in the enclosure, plug it in and then use Boot-Option to attempt to boot from the now external disk.  Here are links to the screwdrivers and enclosure you would need.
    $5 Toolkit: http://eshop.macsales.com/item/OWC/TOOLKITMHD/
    $22 USB 3.0 enclosure: http://eshop.macsales.com/item/OWC/ES2.5BU3W/
    If you attempt a clean install, use the Partition tab to repartition the disk, selecting one partition and with “Options…” electing a GUID partition.  Then use the Erase tab, select “Security Options…” and set it to write a single pass of zeros.  This will write to every sector to map out bad blocks.  (If you have an SSD do not write a pass of zeros.)
    If you do need to replace it I recommend an new inexpensive (~$100) and super-fast hybrid SSHD drive that has an 8 GB SSD cache that makes the data fly.  Google “Seagate 1 TB hybrid SSHD”.

  • How to fix Flash Player buffering entire video before playing?

    I am using the most up to date version of flash (16.0.0.305), windows 7, and the problem persists across all browser (IE, firefox, chrome). Today all flash videos are buffering the entire video before playing and i can't seem to figure out how to fix it. I've gone through the entire troubleshooting from Video playback issues (i.e. clearing caches, re installing chrome, re-installing flash, etc.) and nothing seems to change it. Youtube and other premium streaming services (ex. netflix) work fine which suggests the streaming problem is specific to flash. Any help would be greatly appreciated.

    I tried uninstall and re install both Flash Player and Chrome it self but nothing changed.
    I also noticed that when i try to download something on chrome (this is the browser i use for everything), for example a movie trailer from Apple's trailer site (for example this movie trailer iTunes Movie Trailers) i right click and press Save As, it does nothing after that and after let's say some seconds the window pops up asking me where to save it, and i save it. That means that when i press "Save As" it does starts downloading in the background (like the first post in this thread states) and only wneh it finishes downloading the Chrome pop up window appear. When it should pop immediatelly asking me where to save it the moment i right click something and press Save As. At least that what i used to do before THIS whole problem started......
    Any thoughts...??????
    Please i am desperate...... 

  • How can I flash back off on UNDO tablespace?

    I have used flashback on ( oracle database), then I have flashed back off some tablespaces.
    I have some question:
    Can I flashback off on UNDO tablespace?
    When I flashback on Undo tablespace, that'll impact to flashback feature or not?
    Thank you.

    TEST:
    SQL> flashback database to timestamp to_timestamp('2008-05-20 19:13:00', 'YYYY-MM-DD HH24:MI:SS');
    flashback database to timestamp to_timestamp('2008-05-20 19:13:00', 'YYYY-MM-DD HH24:MI:SS')
    ERROR at line 1:
    ORA-38753: Cannot flashback data file 5; no flashback log data.
    ORA-01110: data file 5: '+DATA/testdb/datafile/example.1075.651074487'
    ORA-38753: Cannot flashback data file 3; no flashback log data.
    ORA-01110: data file 3: '+DATA/testdb/datafile/undotbs1.1086.651074273'
    SQL> alter database datafile 5 oflfine;
    alter database datafile 5 oflfine
    ERROR at line 1:
    ORA-01916: keyword ONLINE, OFFLINE, RESIZE, AUTOEXTEND or END/DROP expected
    SQL> alter database datafile 5 offline;
    Database altered.
    SQL> flashback database to timestamp to_timestamp('2008-05-20 19:13:00', 'YYYY-MM-DD HH24:MI:SS');
    flashback database to timestamp to_timestamp('2008-05-20 19:13:00', 'YYYY-MM-DD HH24:MI:SS')
    ERROR at line 1:
    ORA-38753: Cannot flashback data file 3; no flashback log data.
    ORA-01110: data file 3: '+DATA/testdb/datafile/undotbs1.1086.651074273'
    SQL> alter database datafile 3 offline;
    Database altered.
    SQL> flashback database to timestamp to_timestamp('2008-05-20 19:13:00', 'YYYY-MM-DD HH24:MI:SS');
    Flashback complete.
    SQL> alter database open resetlogs;
    alter database open resetlogs
    ERROR at line 1:
    ORA-01092: ORACLE instance terminated. Disconnection forced
    Process ID: 18585
    Session ID: 115 Serial number: 5

  • How to put flash as a table or cell background or put HTML elements on top of flash file?

    Hi Guys,
    Could anyone please suggest me that how to put flash file as a table or cell background. I want to design a website and want to put HTML elements like table, images, text on top of flash file. so its look like animation in background. please visit following websites for an example: http://www.gagudju-dreaming.com/ and http://disneyworld.disney.go.com/
    Please guide me ASAP, thanks a lot in advance.
    Nitz.

    Hi Nitz
    The first thing you must do is convert your layout from table based to css based, (tables are o/k for tabular data, but not layout) but if you have never used css for layout it may be a steep learning curve.
    My recommendation is to start with the following tutorial on converting a table based comp to a css layout -
    http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html
    More info on using css is available here - http://www.adobe.com/devnet/dreamweaver/css.html.
    Once you have converted your site the 'procedure' for using swf's as a background, (does not work well with flv's, but can be done using html5 video without a skin, to a limited extent) is the same as having a background-image resize automatically to the full browser view-port. The best way to learn how to do this is to view the code on a page using the background-image technique, view the code on this page - http://www.pziecina.com/indexold.php.
    However, instead of having a fluid layout I would recommend using a fixed layout size to start with, as this overcomes many problems. I have uploaded a basic test page to illustrate the idea to - http://www.pziecina.com/test_ideas/swfbg_test.html. As I said the page must be resized in this example in order to see the effect, (so do not forget to resize the browser, even if it is only by 1px), but if you use a fixed size layout and your swf's size fits the desired area correctly the resize should not be required.
    PZ
    www.pziecina.com

  • How to fix flashing screen on iphone 5...

    it keep on flashing till the screen become black and it become some kind of static... how can i fix this..please help

    Sounds like a hardware issue to me but the standard troubleshooting is...
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    If still a problem restore with your backup.
    If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    If still a problem, it's likely a hardware issue.

  • How to fix Flash crashes and failure to load on streaming sites?

    Crashes:  Over the past month, I have been experiencing MAJOR Flash Player problems.  The biggest problems were random crashes during ads on streaming sites: Hulu and Crackle.  When Verizon and (and sometimes Maybelline) ads would play, the player would grind to a halt, have trouble moving forward unless I minimized the window while the ad played, or completely crash with a white screen and grey circle with an exclamation mark.  Sometimes the problem completely crashes Firefox, not just the video screen.
    Player load problems:  Today, the Flash Player won't load at all on CBS.com and cwtv.com.  On CBS.com, a white circle will appear to seem as if it will load, but nothing happens.  On TVLand.com I have a similar experience.  CWTV has just a blank black screen.
    Please help!  This occurs with Firefox and IE 8.  I have a 32-bit XP system running SP 3.   My copies of Flash are up to date for both browsers; hardware acceleration and Protected Mode are off.

    I did not have any trouble with the free swype keyboard on the same Android version but on a Note 4.
    The one difference I noticed, however is that I have automatic updates selected. Do any other settings change?

  • How to fix the on/off/ lock button on an iphone 4s, how to fix the on/off/ lock button on an iphone 4s

    my on/off/lock button broke on my iphone 4s i can't afford to pay $199 for it and i'm afraid to do the repairs myself. do you have any suggestions on what i should do?

    Te Apple exchange price is $149 for 32 GB 3G and $199 for the 64 GB. Likely not worth it.
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Fix it yourself if you are up to it
    iPod Touch Repair – iFixit

  • How to fix flash player contiually crashing?

    Windows 7 32 bit, Intel 2.53Ghz cpu, 2Gb memory, machine is clean, no malware or unnecessary junk.
    Install flash player successfully everything looks good, but at any website that requires flash player, it either freezes or crashes. This happens repeatedly to the point where I delete the player in disgust...until the next time a web site refuses to function without it, so I install a new (and most recent) version, and the same thing happens again. And again. And again!!!
    I read in the questions that this is a common issue with many many users, so just exactly what is wrong? Why can't Adobe make a flash player that works properly? I don't have any unusual, out of the ordinary machine , just a standard garden-variety Intel Windows machine. Flash player should work, but doesn't. This is getting extremely irritating and frustrating, I'm greatly tempted to abandon all Adobe products for good, and make do without using this blasted infernal Flash Player.
    FWIW I am not a noob, I've been using and maintaining PCs since Windows 3.1 so please don't take the route of "user error" with me.
    Whether I choose to "continue" or "stop" this message pops up again every few moments, and this continues until finally
    the Flash Player crashes... which doesn't really matter at that point because the thing has been no use at all up until then.
    If anyone has a solution please email it to me: I don't have the time or patience to keep checking back simply to see if anyone
    responded.  I've wasted enough time on similar sites where questions go unanswered for months, or in some cases years,
    and by the number of questions on this same issue, I suspect there is no solution -- unless perhaps somebody finds an alternative to using Adobe flash Player, a solution for which I sincerely hope!

    I tried uninstall and re install both Flash Player and Chrome it self but nothing changed.
    I also noticed that when i try to download something on chrome (this is the browser i use for everything), for example a movie trailer from Apple's trailer site (for example this movie trailer iTunes Movie Trailers) i right click and press Save As, it does nothing after that and after let's say some seconds the window pops up asking me where to save it, and i save it. That means that when i press "Save As" it does starts downloading in the background (like the first post in this thread states) and only wneh it finishes downloading the Chrome pop up window appear. When it should pop immediatelly asking me where to save it the moment i right click something and press Save As. At least that what i used to do before THIS whole problem started......
    Any thoughts...??????
    Please i am desperate...... 

  • How to fix flash player, it recognizes my microphone, but doesn't record sound on websites?

    We shortly I wanted to record something on http://www.musipedia.org/microphone.html so it asked me to allow usage of adobe flash player and when I wanted to record sound he didn't do it so i got to settings and checked microphone it was there and it was set on wright one os i tried to clap in front of him but chart didn't move. Next I went to audio setting on windows to check it and there microphone works fine. So my question is what is wrong why flash player won't record sound from mic? tnx in advance for replies.
    Message was edited by: Kage19

    Odd...
    I got top the linked page and set up my mic, and pressed "Record"...
    I see the "scrubber" moving to indicate that it's indeed picking up the sound from my mic, but on playback, it's dead silent.
    I've got a $90 Logitech porfessional headset with stereo noise cancelling mic, so I can say with pretty good assurance it ISN'T hardware on my end. The mic works with Skype, FaceTime, and QuickTime for recording.
    At this point I don't really know what to do.

  • How to fix Flash

    Hello;
    I am looking for help. I am having an annoying problem with
    Adobe Flash Player 9.0.45.0 for Internet Explorer 7. Whenever I go
    to a page that uses flash, I get a flickering display whenever I
    move the mouse or after I click something. It also seems that it
    stops working. If someone can help me ASAP. I'd apreciate it.
    Thanks

    1. System Preferences > Flash Player > Advanced > Delete All
        Press “Delete All” button under “Browsing Data and Settings”.
    2. Install Adobe Flash Player.
        System Preferences > Flash Player > Updates
        Press the “Check Now” button.
        http://get.adobe.com/flashplayer/
        Download it and quit Safari from Safari menu in the menu bar.
        Follow the prompts to install Adobe Flash Player.

  • Whenever the flash goes off on my camera it turns my screen and the picture blue. How do I fix that?

    Whenever the flash goes off on my camera it turns my screen and the picture blue. How do I fix that?

    Chances are you saved the file as a jpg -- which does not support transparency.
    Save the file as a psd or tiff and see if that solves the problem.

  • HT1551 The light on the front of the base is flashing rapidly but I cannot get the system to come on. Book says it is having problems but it does not say what type of problems or how to fix it. Any suggestions?

    The light on the front of my apple tv is flashing rapidly and it  won't send a signal to the TV.  The book says it is having trouble but does not say what it is or how to fix it.  My daughter was watching it last night and I think she turned the tv off without putting it to sleep.  Any suggestions?

    Sorry the news here is not good.  If the light just stays flashing then it is not able to succesfully startup the most basic part of the software.  The only option at this point is to find a USB cable that will let you plug ATV into a computer with iTunes and do a full restore of the system firmware.

  • I tried to update the software for my iPhone 4S. It froze, and now won't turn off, or on, or sync.  Any ideas on how to fix this?

    I tried to update the software for my iPhone 4S, 16 GB to the most recent version (8.1?).  I don't know what I was updating from, because I can't access that, but it was whatever was installed on it (I got it about a year ago, so probably 6.something). 
    It froze, and now won't turn off, or on, or sync with my macbook plus, which is what I have always sync'd it to.  (I backed it up and sync'd it right before I tried to update the software.)
    Since it originally froze almost 3 hours ago, it shows a white screen with the apple on it and a line underneath.  When I try to sync with my laptop, it says it needs me to enter a passcode on the phone, which I can't enter because the screen is frozen.  So I'm unable to access the iPhone portion of iTunes.
    I have tried to turn it off, with no luck.  I have tried rebooting my laptop and syncing, but I still get the same result.
    Does anyone know how to fix this?
    I really wanted to wait to update the software, but I was having internet connectivity issues for the past 3 weeks, and Sprint suggested updating the phone's software.
    Thanks in advance for your help!

    Hi NWL1,
    Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • Can anyone tell me how to fix my iPod. I was updating it and I turned it off in the middle of the update. I tried to put it through a recovery on the iTunes but it keeps giving me 3194.When I turn it on it will go to a light blue screen.

    Can anyone tell me how to fix my iPod.I was updating it and I turned it off in the middle of the update. I tried to put it through a recovery on the iTunes but it keeps giving me 3194.When I turn it on it will go to a light blue screen.

    See the action for that error included here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

Maybe you are looking for

  • Parent / Child Groups in Portal with LDAP

    Heya, we are using EP 7 on SP 10 (NW 7), for User Authentication we use the UME with a configured (writable) LDAP Server as backend with a flat hierarchie. We have a Federated Portal Landscape with 3 Portals connected to one "main" portal and using R

  • Toucscreen problems with the 5800 xpressmusic

    Recently the touchscreen on the phone has started to play up. occassionally it works fine but sometimes it doesn't work at all. i'm trying to see if the recent update will solve this problem but any other suggestions would be appreciated. Thanks!

  • How to set Where cluase AND dynamically?

    Hi all, I need some info on how we can assign the value to bind variable in AND of the where clause of View Object Query from the backing bean. As of now I am using the below lines of code for that. ViewObject vo = am.findViewObject("TestDynamicWhere

  • Xfce broken completely and reinstall does not help...

    Dear All, I installed Xfce and it was working just fine until I got a strange error with unmounting a usb stick. After that the Xfce panel somehow disappeared after reboot. I don't remember exactly what I did, but now it is completely broken - I see

  • Configure ITEM FIELDS (Class /SAPSRM/IF_MDF_ITM_DYN_CONTROL) in SRM 7.0

    Hi, I am using the class /SAPSRM/IF_MDF_ITM_DYN_CONTROL with the common signature IV_OBJECT_TYPE IV_FIELD_NAME IS_HEADER IS_ITEM IS_ADD_DATA CS_METADATA to control my fields within SRM on ITEM LEVEL. Question: I have one Shopping cart with two positi